Download cryptopro csp 4.0 program. How to enter the serial number of CryptoPro - Kontur.Extern. CryptoPro CSP license terms

• authorization and legal validity electronic documents when exchanging them between users, through the use of procedures for the formation and verification of electronic digital signature(EDS) in accordance with domestic standards GOST R 34.10-94, GOST R 34.11-94, GOST R 34.10-2001, GOST R 34.10-2012;
• ensuring confidentiality and control of the integrity of information through its encryption and imitation protection, in accordance with GOST 28147-89; ensuring the authenticity, confidentiality and imitation protection of TLS connections;
• control of the integrity of system and application software to protect it from unauthorized changes or from violation of the correct functioning; management of key elements of the system in accordance with the regulations of protective equipment.

Key carriers for CryptoPro CSP

CryptoPro CSP can be used in conjunction with a variety of key carriers, but most often they are used as key carriers windows registry, flash drives and tokens.

The most secure and convenient key carriers that are used in conjunction with CryptoPro CSP are tokens. They allow you to conveniently and securely store your certificates electronic signature... Tokens are designed in such a way that even in case of theft, no one can use your certificate.

• MPCOS-EMV processor cards and Russian smart cards (Oscar, RIK) using smart card readers supporting the PC / SC protocol (GemPC Twin, Towitoko, Oberthur OCR126, etc.);
• Touch-Memory tablets DS1993 - DS1996 using Accord 4+ devices, electronic lock"Sable" or tablet reader Touch-Memory DALLAS;
• electronic keys with USB interface;
• removable media with USB interface;
• Windows registry

Digital Signature Certificate for CryptoPro CSP

CryptoPro CSP works correctly with all certificates issued in accordance with the requirements of GOST, which means with most certificates issued by Certification Centers in Russia.

In order to start using CryptoPro CSP, you will definitely need a digital signature certificate. If you have not yet purchased a digital signature certificate, we recommend that you.

CryptoPro CSP license terms

By buying CryptoPro CSP, you get serial number, which you need to enter during the installation or configuration of the program. The key validity period depends on the selected license. CryptoPro CSP can be distributed in two versions: with an annual license or a perpetual one.

By purchasing a perpetual license, you will receive a CryptoPro CSP key, which will not expire. If you buy, you will receive a CryptoPro CSP serial number, which will be valid for a year after purchase.

Supported Windows operating systems

Supported UNIX-like operating systems

Supported algorithms

This section contains all the main distributions of programs and drivers. Which will be needed by the clients of the certification center "ITICOM" in Simferopol (Crimea) to use electronic signatures in their activities.

For example, to work on electronic trading platforms, participation in tenders for public procurement in Crimea, it is necessary to establish a number of programs. Such as: , CryptoPro CSP Browser plug-in, Key carrier driver (Rutoken, eToken, etc.)... To declare electronically to Rossalkogolregulirovanie, in addition to the above, you need to install Declarant-ALCO and

Before downloading the distribution kit, please determine the version and bitness of your operating system.

How to install CryptoPro on a computer, installing CryptoPro 4.0

CryptoPro CSP is a crypto provider and provides the legal value of electronic documentation, protection of connections. It is a key product among CryptoPro products. How CryptoPro CSP install most of all questions arise. We suggest that you familiarize yourself with the information below for the correct installation of the program. To install this software on the computer, the user must have administrator rights. You need to insert the software on the disk into the drive or select the folder with the distribution kit on your computer. After starting the Installation Wizard, you must select the language to use. During installation, there is also the possibility of choosing the level of protection (class).

Further installation is carried out in accordance with the choice of actions indicated by the Installation Wizard. So you may need to specify the serial key, configure additional sensors, adjust the SKZI to use the key storage service. The installation can be complete or custom, depending on the user's tasks. Custom installation helps you install additional prerequisites. It is advisable to reboot the computer after installation to correct work programs.

Entering the serial number depends on which certificate is used for the job. Since the end of April 2014, Kontur.Extern subscribers can be issued certificates with a built-in license. An indication that the license is built-in is the presence of the line "Crypto-Pro Limited License" on the "Composition" tab in open key certificate (see).

If the certificate with an embedded license

The public key must be set to the private key (see instructions).

The workplace must have a version of Crypto-Pro of at least 3.6 R2 (3.6.6497) installed. You can check the version of the encryption provider by opening the Start menu> Control Panel>

To work with such certificates, have a valid license for workplace not required.

If the certificate is without a built-in license (purchased a serial number for a workplace)

First of all, you should find an appendix to the agreement "License to use software product CryptoPro CSP ". It will contain a serial number, which must be entered in one of the ways described below.

If this application is not available, you need to contact at the place of connection. If you find contacts service center will not work, you should contact technical support by the address [email protected] , indicating the essence of the problem and the TIN and KPP of the organization.

You can enter your license serial number using the Diagnostic Portal or manually.

License Entry via Diagnostic Portal

• Go to the service at https://i.kontur.ru/csp-license.
• Click the "Next" button.
• After completing the check, select "Install".
• After installing the components, enter the license number in the field and click "Enter".

• The license has been entered, the validity period of the new license is indicated.

Manual license entry

The procedure for manually entering a CryptoPro license depends on installed version encryption provider. You can check the version of the cryptographic provider by opening the menu "Start"> "Control Panel"> "CryptoPro CSP". The product version is listed on the General tab.

Below are the settings for the versions:

To enter a license for CryptoPro CSP version 3.6, you must perform the following steps:

1. Select "Start" menu> "Control Panel"> "CryptoPro CSP" .

2. In the "CryptoPro CSP Properties" window, click on the "CryptoPro PKI" link.

In CryptoPro CSP 3.6 R3, the procedure for entering a license is greatly simplified. Instead of the link "CryptoPro PKI", you should click on the "Enter license" button and enter the serial number from the form in the window that opens. Click "OK", the license is entered.

3. In the PKI console window, select the "License Management" item and expand it by clicking on the icon on the left.

4. You need to right-click on the "CryptoPro CSP" item and select "All tasks"> "Enter serial number".

5. In the window that opens, enter the serial number from the license form and click on the "Ok" button.

To enter a license for CryptoPro CSP version 3.9, you must perform the following steps:

1. Select "Start"> "Control Panel"> "CryptoPro CSP".

To enter a license for CryptoPro CSP version 4.0, you must perform the following steps:

1. Select "Start" menu> "Control Panel"> "CryptoPro CSP" .

2. In the "General" window, click on the "Enter license" button.

3. In the window that opens, fill in the proposed fields and click on the "OK" button.

In connection with changes in the legislation of the Russian Federation, to sign all documents from 01/01/2020, it is necessary to use certificates generated according to the new standard GOST R 34.10-2012... Suitable for their release and use only CIPF "CryptoPro CSP" 4.0.

Attention! Already now it is necessary to install CryptoPro 4.0 at workplaces, so that reporting can be submitted to all state. organs. Some of them have already switched to work with certificates issued in accordance with the new GOST, and to work with them you need CryptoPro 4.0.

How to make sure that CryptoPro CSP 4.0 is installed at the workplace?

Launch "CryptoPro CSP" ("Start" - "CRYPTO-PRO" - "CryptoPro CSP") and go to the "General" tab. The CIPF version is indicated in the "Product version" field.

How to install CryptoPro CSP 4.0?

1. Copy key information to removable media.
2. Remove CryptoPro CSP 3.6 using.

If you have installed CryptoPro CSP software version 3.9, you can skip this step.

3. Download the distribution kit "CryptoPro CSP" 4.0 in one of the following ways:

• Go to the "Service Management" tab, open the "Workstation", in the "Plugins, add-ons" section, select.
• Register on the official website of "CryptoPro" and download the distribution kit.

The license number of "CryptoPro CSP" 4.0 can be found in the section "Subscriber" - "Licenses".

If there is no number in the "Licenses" block, check if an invoice has been received for payment in the "Finance" section.

If you do not have an account and license number for CryptoPro CSP 4.0, we recommend purchasing it in our online store.

When can you get an ES generated according to the new GOST?

Until 31.12.2019 with the help of "CryptoPro" 4.0 you need to get new certificate for reporting.

All certificates obtained before 31.12.2018 , it will be possible to use until the end of their validity period, since they fully comply with the requirements of the legislation, while at your workplace, "CryptoPro" 4.0 must be installed.