Do I need to clean windows 10. Ways to clean the registry in Windows. Should I clean the registry

All the best!

Why Windows always works with different speed? The question is probably rhetorical ...

When you just install the system, it seems to "fly": it loads quickly, folders open immediately without delay, nothing freezes: everything works as it should. But a week or two, a month passes, and Windows seems to have changed: there are lags, freezes, tabs in the browser also slow down. What to do with all this?

This happens due to the fact that "garbage" begins to accumulate in the system: incorrect and erroneous entries in the registry, leftover temporary files, cache in the browser, empty folders, shortcuts leading to "nowhere", etc. All this creates a load on the OS, and because of this, performance decreases.

In this article, I want to give a few sensible programs for cleaning the Augean stables of Windows from garbage, so that the PC / laptop works faster (all programs are compatible with Windows 10 and support 100% Russian!).

How many people - so many opinions ...

But I believe that Advanced SystemCare- this is one of the best programs for optimizing and cleaning Windows from all sorts of garbage (which I listed above in the article). Moreover, what is especially pleasing, the program is not replete with some complex tinctures, the developers have made it so that any user can easily and easily understand it, and quickly clean their PC.

So, at the first start, the program will automatically prompt you to check the status of your PC (see the example in the screenshot below). You just need to press one button - START.

Note: looking ahead, I will say that then SystemCare will monitor the state of your Windows, warn about potentially dangerous software, warn about changes start page in the browser, changing startup, etc. And besides that, remind you of the need for timely cleaning and optimization of Windows. In general, it will take full control of the state of your system.

By the way, about 35 thousand problems were found on my laptop. Moreover, junk files are already 6 GB, which is quite significant ...

By the way, the program scans the system rather corrosively, checks:

1. loading elements;
2. junk files;
3. errors of shortcuts, registry, disk;
4. malware;
5. internet problems;
6. performance problems etc.

To fix all these problems, it is enough, again, to press just one button - "Fix" (see the screen below).

Well, in addition to this review, I also want to add about the tab "Acceleration"... If, after cleaning up your system, you are still unhappy with its responsiveness, SystemCare has a special acceleration tab that will make your system even more performant.

In general, I recommend using it on an ongoing basis. Perhaps the only drawback is that the program is paid and to unlock all the options, it will require the purchase of a license. But the free version will also clean up your OS very, very well.

CCleaner

One of the most popular junk cleaning utilities in Windows. The utility quite "corrosively" checks your Windows for: temporary Internet files, files in the recycle bin, old and unnecessary files from Firefox, Opera, Media Player, eMule, Kazaa and other applications. Moreover, all this garbage will be found quickly and removed just as quickly. By the way, I want to note that the utility only removes really garbage, for required files don't worry - when using it for over 10 years, I have never encountered it messing up Windows (or any program).

To start the analysis of the system - just open the section "Cleaning" and then press the button "Analysis"... Within a few minutes the program will estimate how much garbage it can remove, and you just have to confirm it ...

CCleaner, by the way, does quite a lot of work with the registry: erroneous entries will be deleted, various "tails" from remote programs, various temporary events, etc. The screenshot below shows the "Registry" tab, which shows what the program will work with.

Additionally, CCleaner has some pretty useful features:

1. uninstall programs: firstly, with the help of this tab you can remove even those programs that are not uninstalled in the usual way; secondly, this uninstaller removes applications cleaner than the one built into Windows;
2. autoload: will help you be aware of what is being loaded instead of from your Windows (some of the software can be disabled for faster OS loading);
3. duplicate search: search and delete duplicate identical files on the disk (collections of music, pictures, photos, etc.);
4. system recovery (no comments);
5. disk analysis: helps you find folders and files that take up a lot of space on the HDD.

In general, the program is rightfully considered one of the best for cleaning the system from unnecessary "trash". I recommend to use!

Wise Disk Cleaner

This program is the best for cleaning your hard disk(moreover, I just emphasize, according to the degree of purification!). It will remove as much garbage as no other similar utility!

The interface of the utility is madly simple, at the top of the window there are several tabs: quick cleaning, deep cleaning, system cleaning, defragmentation. The user only needs to press one button - "Scan" (the program already contains all the necessary presets for optimal cleaning of the OS).

Wise Disk Cleaner - disk analysis, trash search

Compared to CCleaner and SystemCare (which found about 6-7 GB of junk) - Wise Disk Cleaner found almost 15 GB of junk files! There is something to compare!

The utility also has the ability to delete some files in Windows: downloaded OS files (for example, update files), installer cache, help files, etc. For this, the program has a special. tab "System Cleanup" (screenshot below).

And one more thing - Wise Disk Cleaner can defragment HDD, which will have an even better effect on system performance. By the way, it is recommended to do defragmentation after a complete system cleaning.

If you need a good disk cleaner, then better program can not found. In functionality, of course, the program loses to such analogs as SystemCare or CCleaner.

Unlike other programs presented in this review, Reg Organizer is a more multifunctional package of utilities in one bottle! Contains everything you need to optimize the OS, its fine tuning and cleaning.

After starting the program, Reg Organizer will carry out an express check of your system to identify problems: with the registry, with unnecessary files on a disk with Windows autorun, it will analyze your Internet connection (can it be accelerated), etc. In general, despite the initial positioning of the program for an experienced user, now, even a completely beginner can use the modern version of the package.

Reg Organizer: main program window // express system check

The main functions of the Reg Organizer package:

1. the function of cleaning the disk from garbage (including old Windows versions, updates, help, etc.);
2. cleaning and optimization of the registry;
3. defragmentation and compression of the registry;
4. registry editor;
5. a function for uninstalling programs (which will check if there are any "traces" left of the program to be removed in the system - and will remove them if they are found);
6. autorun optimization function: checks if there is anything unnecessary in autorun, which makes your PC turn on much longer;
7. fine tuning systems (such utilities are also called tweakers). Before using them, I recommend doing copy of Windows(so that if something happens - it can be).

By the way, I want to highlight separately in this review disk cleaning function (note: because the key message of this article): the program will check old driver files, temporary folders in Windows, program crash and error reports, explorer thumbnails, error reports, etc. In general, the amount of junk removed is comparable to Wise Disk Cleaner (which I dubbed the best cleaning quality!).

JetClean

Despite the too "simple" appearance and design of this utility, JetClean is a powerful enough program for removing various "garbage" from Windows: erroneous entries in the system registry, "tails" from programs, history in browsers, etc.

Also, I would like to note that many other similar utilities of its kind are paid programs (or at least ask for payment for all the functionality), JetClean is free!

Key features of JetClean:

1. cleaning Windows from garbage;
2. cleaning the registry;
3. cleaning applications and shortcuts;
4. cleaning RAM;
5. reducing the number of system crashes, errors, freezes, etc.;
6. optimization of OS startup;
7. internet accelerator;
8. as a consequence of the previous steps - improving the performance of the PC as a whole.

By the way, JetClean has tools for "fine-tuning" the utility itself, for example, to perform auto-cleaning (and forget about manual checking and separate instructions). Thus, once you configure the utility, you can completely forget about cleaning Windows and always work in a "fresh" fast OS!

In general, JetClean deserves a fairly high rating and recommendation for use. By the way, the program supports the Russian language in full, is 100% compatible with Windows 7, 8, 8.1, 10.

The report is over, thank you for your attention.

What, by the way, do you clean the Augean stables of Windows?

Operating room registry Windows systems Is a large database where all information about the PC configuration, OS settings, information about installed programs ah and their ways. Over time, this database is filled with outdated and incorrect entries (keys) that arise in Russian speaking due to the crooked hands of the creators of the programs and the very operating system... For example, you decided to delete an already annoying game. We launched the uninstaller, waited until the end of the process, and, it seems, everything, but the registry could contain entries about this game, which are now dead weight there. And the longer you use your computer, the more junk accumulates in the registry. This slows down the overall performance of the computer. and slows down the launch of programs, so you need to periodically clean the registry.

Step-by-step instructions for cleaning the Windows registry

Theoretically, it is possible to clean the registry manually, but firstly, it takes a very long time, and secondly, it is unsafe, especially for non-computer professionals. Therefore, CCleaner will come to our rescue - a free, powerful and completely safe system cleaning tool. CCleaner helps you find all the trash from third party applications, and destroy it in just a couple of minutes.

After you have installed ccleaner, run the application, go to the left menu in the section " Registry", And select the function" Search for problems«:

CCleaner will start checking your operating system registry for errors. This process takes one to three minutes (depending on the size of the database itself). At the end of the process, press "To correct…" in the lower right corner of the program.

Here ccleaner will prompt you to create a backup current state registry. Be sure to agree - if something goes wrong, you can simply restore the saved copy.

After you save the backup, a window will appear with a description of the problems found. Here you can either fix each bug individually (recommended for advanced users only), or click« Fix marked« and ccleaner will automatically fix any errors and problems it finds.

At the end of the process, you will see a window like this, informing you that the cleaning of the registry is complete. For your own interest, you can click on the links and see what specific problems have been resolved.

That's it, ccleaner has finished cleaning the registry and now your computer will run a little faster. Repeat this procedure once a month to keep the windows registry clean and tidy in the future.

Just as we do the cleaning in the apartment, arranging things, the timely "cleaning" in the computer programs is also required. For launch installed applications and the registry is responsible for linking files in the system as a whole. When uninstalling software, even built-in Windows tools, in the OS, in any case, "tails" remain, wrong keys and so on. Therefore, any PC needs regular cleaning of the Windows 10 registry. You can also do this manually using an editor. As well as , it is a system utility that allows you to manage your PC. However, not everyone, even the most experienced and knowledgeable user, is able to find the desired record and compare it with the remote software. After all, links can be scattered across all branches, of which there are a huge number in the editor. Therefore, it is recommended to use utilities, the main purpose of which is precisely in cleaning.

CCleaner

This application was originally intended to clean up the disk, but then its functionality increased. Now it also includes cleaning the Windows 10 registry.

When installing, do not forget to select Russian in the right upper corner... When the installation is over, run the program and select the desired tab.

Here you can adjust the positions for cleaning. To start the process, click "Search for problems".

Then click Fix Problems.

It is better to make backup copies of the files being fixed.

You can fix the problem one at a time, or you can do it all at once. To do this, you need to click "Fix Selected".

The process is carried out quite quickly and the result is pleasing.

Cleaning the Windows 10 CCleaner registry is quick and easy. Today it is one of the most popular utilities. This is due to its versatility. One program replaces many. So CCleaner can rightfully be called the best program to clean the registry and fix errors for Windows 10.

Wise Registry Cleaner

Another way to clean the registry on Windows 10. Download from the official site.

At the first launch, a window will appear prompting you to make a copy. We agree.

You can choose to create a full copy or. We created a restore point because a rollback is easier to accomplish than a manual restore.

The quick cleanup is pretty quick. It is recommended to use it if you frequently carry out this procedure. But deep scanning must be done at regular intervals, for example, once a week.

The utility found more bugs than CCleaner.

Click the Fix button. The process was completed instantly, but 72 errors could not be fixed.

Reg Organizer 8.0

You can download the utility here.

The site describes in detail how to use the application and how to clean the registry in Windows 10. Install after downloading and run the program.

You can do several things: quickly check the system; clean it; clear browser history, cache, etc. This applies to logins, passwords and other private data; optimize and defragment; configure autorun; remove unnecessary applications.

Click in the left pane to select an action. After clicking on the "Scan" button, the program requires you to close the applications participating in the cleaning.

To avoid this, let's configure the utility by removing the checkboxes from clearing the cache. You can get into the settings using the "Change" button located at the top left.

After finishing, you can see how much space will be freed up on the disk. The program is paid, so a license is required for full functionality. In addition to these functions, the application also has an editor, fine-tuning and takes screenshots of the interface.

Registry Life

Another utility for cleaning the registry Windows 10. Allows you to clean and optimize the system. At the same time, it is completely free. You can download it here.

In addition to the registry, you can also optimize autorun and undo changes. There are not so many settings in the program as in similar utilities.

After scanning, you can start fixing the found problems. Advanced users can view invalid entries.

The fixes are fast.

Additionally, you can install the Soft Organaizer utility, which provides comfortable work with applications.

To access all of its features, you must purchase a license.

Auslogics BoostSpeed

Another cleaner. You can download it here.

Once started, scanning starts.

To start cleaning, click the "Fix" button.

In addition to cleaning, you can tune the operating system. In fact, this is its optimization in different directions.

Personal data management, PC acceleration and various utilities are also available.

Perhaps this program is not inferior in performance and functionality to CCleaner. Cleaning the Windows 10 Registry by standard means Developers at Microsoft have provided for the ability and conduct of manual cleaning of the Windows 10 registry. For this, an editor was created, where the user can independently change the parameters and delete unnecessary ones. We strongly discourage this procedure:

1. You will not be able to clean everything with high quality and in detail.

2. There is a risk of deleting the necessary parameters, which will lead to a failure in the operating system.

For the most curious, we will describe this method.

2. Create a backup. To do this, you need to export the data to a file on disk. You will specify the file and its location yourself.

3. Go to the Software section of the current user settings HKEY_CURRENT_USER. The keys of all programs are located there.

4. Find the one you deleted, but the entry remains for it. Right-click and select Delete.

Thus, you need to iterate over all the remote applications.

We hope that our article will help you choose a cleaning program, and your computer will delight you with its performance.

The registry is a special part of the Windows operating system, which is a database of all the parameters or settings of the OS. All options of the Control Panel and other places of the system, where it is possible to change any parameters, are recorded in the registry. It also stores data about the paths to files, the location of installed programs and other points related to the functioning of Windows. To open the registry in Windows 10, the same methods are used that were used in versions 7 and 8 of the OS - Microsoft did not alter anything here. You can also tune and optimize the OS using third-party programs.

Location

Physically, the registry is made up of a group of files that are stored in the System32 \ config folder. When the OS is loaded, a database is collected from these files with the current parameters, which are used in running Windows... This base consists of five main branches. It is not recommended to edit files from the specified directory directly, because in order to enter windows registry 10, there is a special tool called regedit.

Registry editor

The registry value editor is launched as follows:

1. Click on the search bar on the taskbar or use the keyboard shortcut Win + S.
2. Enter the "regedit" command into the text field.
3. When the search results appear, click on the "execute command" button.

Advice! If the search functions on the taskbar are not activated in the settings, then to start the application, you can always use the standard "Run" dialog, which appears by pressing Win + R.

Change settings

The process of making changes to the contents of the registry is to find the desired string in a specific directory and specify a new value for it. The easiest way to find the required line is through the corresponding option, which is invoked by the Ctrl + F key combination or the F3 key.

You need to be extremely careful when editing the registry in Windows 10, since an incorrect value in any parameter can lead to an error at the next boot of the system and disable it. Before making changes to any parameter, you should search the Internet for information about it.

Third-party registry cleaners

To clean the Windows 10 registry from unnecessary strings and erroneous values, users install third-party software, since the OS does not have the necessary functions in its composition. Errors in the registry can appear as a result of failures of installed programs, and blank lines- due to not completely removed applications.

For example, you can clean the registry on Windows 10 using the CCleaner utility, which is distributed free of charge on the developer's website. By downloading and installing this product, you can start the troubleshooting procedure. For this you need:

1. Start CCleaner.
2. Go to the "Registry" tab.
3. Click on the "Search for problems" button.
4. Wait for the completion of the search procedure.
5. Click on the "Fix" button.
6. Confirm creation backup and specify the file to save current version registry values.
7. Click on the "Fix Selected" button.
8. Close a window.

Recovering registry values

In the event that after manually editing the registry values ​​or automatic cleaning using third-party software there are problems in the operation of the operating system, you need to restore the Windows 10 registry to its previous state. This is done by importing the file created at the editing stage.

In order to write values ​​from a file to the registry, you will need:

1. By using Windows Explorer find the folder storing the * .reg file with the backup.
2. Double click on the file.
3. Confirm the import of values.

Advice! You can also restore data from a file while in the editor. To do this, use the "File" -> "Import" menu, and specify the previously created reg-file.

Video

You can clearly see the work with the OS registry in this video.

Output

The Windows Registry is a powerful OS management tool that provides access to many options not available in the standard Windows visual interface. To access such parameters, tweaker programs are often used, which can adjust the size of the window frames of the explorer, the playback time of animations, and many other parameters. In any case, it is not recommended to change the registry settings for no particular reason, and you should always create a backup before fixing erroneous values.

On Windows 10, the registry is entered through the Run tool (Win + R). Enter the regedit command. Initially, Microsoft stated that there is no need to optimize the registry, you need to do everything from other snap-ins. Nevertheless, since the days of XP, it has become customary to use various utilities for the same purposes. Sometimes revisions were required by those who had close contact with pirated software. In order to deceive the system. Since then, the company's position has not changed: cleaning the Windows 10 registry (all the more so) is not required.

Let's say more: after using some utilities, the shortcuts created there, apparently not according to the rules, disappear from the desktop. Sometimes the system itself crashes after some time. On the one hand, the pros recommend making a copy, on the other, there are two whole unpleasant moments. Firstly, it takes a long time, and the file size turns out to be large, and secondly, not all keys can be easily rewritten. The OS crashes in very many cases. To make it even clearer for readers: the registry is a database of settings, without it Windows system unable to work. That's why you need to clean it as little as possible with pens or even the best specialized tweakers.

Third party software

There are at least two kinds of utilities that are commonly used for these purposes.

1. CCleaner was originally designed for disk cleaning. But then it somehow happened that the options became more and more, until, finally, the software did not take up closely the registry too.
2. The IObit family of tools. The authors saw with their own eyes how some PC protection tools called the software of this company "imitation" of useful actions. Whether it is true or not, we do not undertake to say, but since then we no longer use the funds of this company.

Other tweakers are not so well-known, and it cannot be said that you cannot live without cleaning the Windows 10 registry. On the contrary, the less you touch the database, the easier it is to work on a PC.

CCleaner

Today this software can perform very extensive functions:

• File recovery.
• Process monitoring.
• Information about a set of PC equipment.

These are just a few examples. But all advanced options need to be paid for, and most of the population does not need all of this to spend pounds sterling. We suggest looking at the interface free version... As you can see, she knows how to work with the registry.

Please note that only paid versions... Let's see what this utility can get rid of.

Here are the approximate line-by-line translations of the bookmark content:

• Missing shared libraries (dll). All keys referring to modules that have disappeared from the PC are removed.
• Unused file extensions.
• ActiveX classes and other classes.
• Library types.
• Applications.
• Fonts.
• Application folders.
• Help files.
• Installers.
• Outdated software.
• Startup lines.
• Saved Start Menu Data.
• MUI cache.
• System events.
• Services

To be honest, I would like to see a transcript for some points. We are sure that the program will not be able to properly clean the startup block or remove those services that we do not like (because it does not know our preferences). You can find out a little more by clicking the Scan ... button. A list of problems will appear, and you can make a more detailed opinion about the utility's capabilities. Here's an example for file extensions.

Indeed, the list contains some kind of rubbish. It is difficult to say exactly how these extensions entered the registry. Of the features of the utility, we can note the ability to create a copy.

How to use it and where can I find it? Choose your own file name and location. Roll back any changes made if necessary.

This can be done, for example, by double-clicking on the copy file.

IObit

With CCleaner, a lot is clear, as for IObit, the official website of the company says that this is the # 1 utility with 150 million users. There is no way we can ignore such a powerful tool.

Please note that a dozen are already included in the list of supported systems. Rather, we will install this tool and test it in action. We consider it superfluous to describe the process of registering an application in the system, we will proceed immediately to consider the possibilities.

We wouldn't call the interface awesome for one reason. Compared to CCleaner, there is an increase in the complexity of the GUI. But usually the cleaning starts on the PC, which is already slow. All this will make the user wait, wasting precious seconds of his life.

In this case, nothing was found. But it is very difficult to figure out what to do next. It turns out that depending on some prerequisites, the search algorithm changes. Just now there was nothing, and after restarting 222 errors were found. Well, thank the creators for their generosity and let's get down to fixing it.

After clicking Fix errors, it disappeared again.

Cleaning by hand

We have already described above how the editor is accessed. Let's repeat:

1. Win + R.
2. regedit.
3. Enter.

Usually they are guided by some keywords... For example, Driver Booster was not removed from us, these are the combinations you need to look for. There are special options for this (see the Edit menu).

Ctrl + F is pressed when first looking for an entry. And then they just crush F3. And so the entire register is traversed. This process can be slow. Moreover, if you do not know exactly what to look for. This is why few people undertake to manually clean the Windows 10 registry. But most importantly, why?

How to delete or create a parameter

In the editor, right-clicking on the required line opens a context menu, the content of which speaks for itself. Create parameters as needed, or delete them.

Make copies of the partitions before cleaning the registry. To do this, right-click on any folder and click Export. The entire nested branch will be written to the file.