The router from Beeline SmartBox ONE is a device that is used to distribute traffic when connected to the Internet. You will learn how to configure your router by reading the description below. Such a router costs about 2,500 rubles. An alternative in the absence cable connection is 4G ZTE router MF90.
Characteristics of the router from Beeline
SmartBox ONE is currently the most new model router from Beeline. One of the advantages of the product is that the device is equipped with a more powerful transmitter capable of operating in two frequency ranges: 5 GHz and 2.4 GHz. This reduces to zero the likelihood that any device used by the user will not be able to connect to the World Wide Web.
To the pluses of using WiFi router Beeline SmartBox ONE is also advisable to include the following:
- Comfortable software interface used to set up a network connection;
- Ergonomic modern design;
- Support for connecting to digital TV;
- The maximum data transfer rate is 300 megabits per second;
- 802.11 standard, which is supported by most modern high-tech devices.
In the case of using a 4G device, data is transmitted at speeds up to 74 Mbps. A Beeline SIM-module is supplied with the device, which opens access to the use of 30 GB of traffic throughout the month. The subscription fee is 1200 rubles. At night, when connected to a 4G network, there is no limit.
How to set up a 4G / WiFi device from Beeline
There is nothing difficult in connecting a router. The rear panel of the product has 7 connectors. To the Power socket, you need to connect the power cable from the mains, and to the WAN connector - the Internet cable, which is routed to the apartment. In the next step, by connecting a cable to one of the LAN connectors, connect the device to the computer. A 4G router from a laptop or stationary PC is connected via a USB port.
- After making sure that all the indicators of the router from Beeline SmartBox ONE are on, launch any browser installed on the computer, and enter 192.168.1.1 in the address bar;
- On the welcome page that appears, enter the admin password and the same username (standard settings) in the appropriate fields, click on the button labeled “Continue”;
- In the main menu that opens, inexperienced users can perform the quick setup procedure, but if you have experience in this plan, you can go to the advanced settings.
Simple configuration of the Beeline router
If you want to quickly set up a router from Beeline, then there are 4 points. They are as follows:
- "Home Internet";
- "WiFi network";
- “Guest network”;
- “TV”.
The “Home Internet” item is used to connect to the network of the Beeline operator. Since all the required parameters are already contained in the installed software (firmware), the user only needs to enter a password and a name (both values are admin).
"WiFi network" - an item in quick settings, which gives access to parameter settings wireless network... Here it is necessary to register in the appropriate fields the name displayed in the connection menu on the devices used, as well as a password of at least 8 characters.
“Guest network” is an item for making settings in order to provide guest access to the Internet.
The “TV” item is used to select the LAN port to which the cable from the IPTV set-top box will be connected, if available.
Connecting a router from Beeline
After entering all the required data and making the necessary settings, you need to click on the “Save” button and wait until the device connects to the network. In time, this should take no more than a minute. If everything is done correctly, the value “Internet connected” will be displayed in the “Status” line. On this, all operations are considered completed, you can proceed to work in the network.
Software update for Beeline router
The software installed by the manufacturer ensures the functioning of the router. In order to avoid malfunctions in the operation of the router, the firmware should be updated in a timely manner. But it is necessary to act with extreme caution when performing such procedures. Otherwise, if something goes wrong, only the service center specialists can restore the Beeline router to work.
Important! The software should be downloaded only from the official site.
The process of downloading and installing firmware updates consists of the following steps:
- We launch the browser, enter 192.168.1.1 in the address bar;
- Enter the password and login (admin);
- Go to the advanced settings menu;
- Select the "Other" item at the top of the page; In the window that opens, on the left, click on "Software Update", then select the address on the computer where the downloaded software will be located;
- We click on the button “Execute update”.
After a few minutes, the router will reboot and be ready to operate again with the new software.
The firmware of this wonderful router with excellent functionality is not carried out.
- In contact with
- Google+
Hello friends. In this note, I will gradually compile a short list of common questions and answers regarding the Beeline Smartbox router.
Please indicate in the comments what general questions you think you need to add here.
Do you want to ask a question? Check if this post contains an answer to it.
Question: What is this Beeline Smartbox device?
Answer: Beeline Smartbox
- a branded router of the Beeline provider, originally designed to work only in Beeline networks.
The router itself is manufactured by Sercomm in Taiwan by order of Beeline. The router is based on a reference board based on Realtek 8197D
.
The router has support for IPTV (by wire, the port is selected in the settings) and the ability to use it as a network storage
Specifications:
Chip: Realtek 8197D (600 MHz)
RAM: 64 MB
Wi-Fi: 802.11b / g / n 300Mbps, 2 internal antennas: 2 × 2 MIMO
Interfaces: 5 RJ-45 connectors with auto-detection of cable type, USB 2.0 port.
Question: Should you buy this router?
Answer: It all depends on your needs, however, I would not recommend buying a router at the official Beeline price (1200 rubles), since for this money you can take a more interesting technically and hassle-free Zyxel Keenetic Lite 2. With Beeline networks, this router works well and is well suited to an undemanding user.
It makes sense to buy if you get a router much cheaper than it official prices.
Question: Is it possible to make the router work with another provider?
Answer: In some cases, when the provider provides the Internet directly via DHCP (without any tunnels, "plugged in the wire - it works") or using a PPPoE tunnel, setting up does not cause difficulties and is done under the superuser account.
Instructions for obtaining privileges.
detailed instructions on setting up the Internet from another provider is described.
Question: The router has a USB port. What can it be used for?
Answer: via usb to the router, you can connect flash drives, external hard drives(subject to additional power supply) to provide access to them over the network (for organizing network storage, for example), also some usb modems.
Question: Is it possible to use a router with 3g modems?
Answer: Yes, starting from version 2.0.25
firmware added the ability to work with 3g mods in the distribution mode via Wi-Fi. To configure, you need to go to them under the superuser and go to:
Advanced settings - Others - Wan, select the item with 3g and make the necessary settings, and also mark the interface as active (tick)
The list of working routers is still unknown, but it is most likely that it is similar to the one for Zyxel. The main thing is, if the 3g modem does not work, do not forget to switch it to “only modem” mode (there are enough instructions on the Internet).
Question: The Wi-Fi connection is unstable despite high level signal... What should I do?
Answer: Change the Wi-Fi channel in the router settings and also try to lower the Wi-FI power (paradoxically, but high power does not always give a satisfactory connection quality) and also rearrange the router.
Question: Wi-Fi is unstable. Signal level low... What should I do?
Answer: This is a common problem with routers with built-in antennas (especially those with low gain).
First, try moving your router and removing obstacles between the router and wi-fi clients.
Then, if the result is still unsatisfactory, try replacing the built-in antennas with external ones.
This requires
0) :
1) Replace the wires going to the antennas with the U-fl - SMA wire (on one side, the ufl connector for connecting to the wi-fi board, on the other, sma for connecting external antenna) and looks like this:
Its cost on Ebay is in the range of 30-100 rubles, depending on the length, quality of workmanship and the impudence of the seller (I took around 70 rubles). This is also found in Russian online stores, but extremely rarely.
2) Bring the connector outside the case and connect any Wi-Fi antenna you have. You can use an antenna from any popular router, for example dlink, or purchase it at a computer store for 100-400 rubles.
The antenna looks like this (for those who do not know)
If after that the signal is unsatisfactory, then most likely you should change the router to a more powerful one.
Question: Can I use the router as a repeater (repeater)?
Answer: Yes it is possible. To do this, put the hardware switch on the router case into REP mode and make the necessary settings.
Question: I want to help / dig deeper with the firmware. How can I do this?
Answer: Fine. Use the following.
Question: Is it possible to install alternative firmware on the router?
Answer: Yes, it is possible to install OpenWRT firmware on the router, but for this, at the moment, you need to disassemble the device and solder it to the UART connector (you need to use a usb-uart adapter to connect).
There is also a risk of “killing” the device. Think if it is for you.
Detailed instructions will appear on the site a little later.
Question: One is not enough for me USB port... Is it possible to add another usb to the device.
Answer: Yes, it is possible, but it requires certain skills and straightness of hands. (difficult and accurate soldering) The board was originally designed to use 2x usb ports, but one was removed to reduce the cost.
You can solder it and use it.
The instructions will come later.
For the information on the last two points, I thank my reader. Maksim
Many customers of the "Beeline" company know about the release of a Wi-Fi router Smart Box and purchased it to use the internet and interactive television. This device is marketed as a modem for fast wireless internet and meets all current standards to ensure high connection speed.
The Beeline company issues devices for its customers
What is so special about Smart Box from Beeline? It is worth saying that the router is really good in terms of internal filling - it supports speeds up to 300 Mbit / s, has a fairly capacious RAM and outperforms other models in performance. The router has an additional USB port, and the built-in antennas are considered the only relative flaw in its design, which, however, provide a large signal coverage area.
For the initial setting of the router parameters, do the following:
- Open the Smart Box menu - enter the device's IP address (192.168.1.1.) In the address bar of the browser, after the welcome message click “Continue”.
- In the authorization window, enter the value Admin on both lines. These data are standard, during subsequent configuration you can change them in order to secure the parameters of the equipment from unauthorized interference.
- Select the menu " Quick setup».
- In the window that appears, in the "Home Internet" fields, enter the login and the key given to you by the provider (you will find this information in the agreement).
- The menu lines “ Wi-Fi Network router "come up with a name home network and set an Internet access password so that the connection is unavailable for.
- You can activate the "Guest network" section as you wish. If you want to create a separate network based on the router for your friends and acquaintances, come up with a name and an access key for it.
- Since the router has 4 LAN connectors, select the one on the bottom line to which you will connect the IPTV interactive television set-top box.
After entering all the necessary data, restart the equipment from Beeline - the corresponding command will appear when you save the changes.
Configuring Wi-Fi Settings
If you want to change the parameters of the Internet from Beeline, go to the router menu and follow these steps:
- Select "Advanced settings" and open the Wi-Fi section, on the left, select the main settings tab.
- The network SSID string is the name of the connection itself, which you change at your discretion.
- You can change the operating mode and channel. It is worth setting an automatic detection for the second function, then the router will be able to determine itself which channel to connect to. What is it for? If your neighbors also have a router and your device is on the same channel, the connection may not be effective enough. When choosing automatic mode the router will switch itself to the less loaded channel.
- In the same smart box menu, you can disable the guest network by checking the box next to the corresponding line (do not forget to save the changes).
Internet connection security
To protect your connection from unauthorized access, just a good password is not enough - you should choose a reliable type of encryption for Smart Box. This is done like this:
- In the advanced settings, the Wi-Fi section, select the "Security" tab in the left menu.
- In the "Authentication" line, select the WPA2-PSK encryption type.
- In the same window below, you can change the access key for connecting to the network.
Updating the software
Each router has a separate firmware, which is constantly being refined and improved to make the device even more efficient, faster and more trouble-free. Therefore, you should update the firmware of your Wi-Fi equipment from time to time, which you can do as follows:
- Download the new firmware on the official website of the Beeline provider.
- We go to the initial menu of the router and select "Advanced settings".
- Open the "Others" section and click on the update line software(ON).
- Select "Select file" and specify the path to the downloaded firmware.
- The router will independently update the software, after which you need to restart it - disconnect and reconnect it to the power supply.
Port forwarding
Often, if you want to use a torrent client to download files or play online applications with Smart assistance Box, you need to forward the port, that is, open it for the above purposes. How to do it?
All this is quite simple and will take a little time, just follow these directions:
- Select "Advanced Settings" again in the Wi-Fi router menu, the "Other" section.
- From the left menu select the NAT tab, Application Support.
- In the window that appears, you can select an application from the list or set your own value, for which you need to click on the "Set user service" button.
- If you are defining your service, enter the application name, select the protocol type and the desired port range in the next two lines.
Remember to save all changes! If, after performing the actions, torrenting or games are still unavailable, try selecting the DMZ Host line in the NAT tab - enter the IP address of your computer from which you open the port. Did not help? In this case, the problem lies not with the router, but with the security settings of the PC.
As you can see, setting up Smart Box from Beeline is quite simple and will make it easy and quick to start using the device for any user. Thanks to the provider's services and a powerful router, you can use wireless Internet access from high speed, stable performance and strong signal.
During the operation of the Smart-Box router, users have a need to reconfigure the equipment, for which they need to enter an individual username and password. But what if the password from the router is irrevocably forgotten or lost and cannot be restored?
In this case, you can unlock the Beeline Smart-Box router by resetting the settings and then entering the credentials and password, including.
What to do if you have forgotten the password for the Smart-Box router?
To unlock the Smart Box router, if the password is lost or forgotten, you need to change it. With the existing settings, it is no longer possible to change the password. It is required to perform a factory reset, and then enter the necessary data, following the recommendations below.
- Check that network cable computer was connected to one of the LAN ports located on the device.
- The cable that runs to the apartment must be connected to the "WAN" port.
- Press the "Reset" button located on the router case.
- On your computer, open an existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome page of management will open wi-fi router... Click the mouse on the "Continue" button on the screen.
- On the "Start over" page that opens, you must enter the standard username and password. Enter admin on both lines and click Continue.
- In the menu that appears, select the section - "Quick setup".
- Here you need to fill in several subsections, described below.
In the "Home Internet" field, enter your new username and password. Other settings of the Beeline home Internet are already implemented in the device memory and do not require adjustment.
In the subsection "Router Wi-Fi network" you need to come up with a name for your home wireless network and a password to access it (at least 8 characters).
"Guest Wi-Fi network" has the same characteristics as a home network, here you also need to enter a name and come up with a password.
In the "Beeline TV" field, you need to select a port for connecting the set-top box. This option is relevant if, in addition to home internet you also use Beeline television. You need to fill in this subsection only when connecting a TV cable to the Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.
After completing all the necessary settings, click "Save".
Saving the settings will take some time, usually about 1 minute.
After making an Internet connection, the router will work, and the message "Internet connected" will appear on the screen.
Reset router Beeline Smart Box
In order to reset the router, you need to find the "Reset" button on the side where the ports for connecting cables are located. It must be pressed with a match or a toothpick (do not use sharp objects, such as a needle, you can damage the button). The button must be kept pressed for 10-15 seconds until the indicators on the front of the device blink. After that, the router will boot with standard settings and will be completely ready for configuration according to the instructions above.
Do not forget to write down the new username and password in order to quickly make the necessary changes to the settings without resetting the router!
Video: Instructions for setting up a Smart Box router
Changing the Internet provider is not a frequent matter, but sometimes it is very necessary. Especially in recent times it concerns Beeline subscribers... Having gained a large customer base at one time, the quality of services gradually began to fall in comparison with developing competitors. However, when changing the operator, one problem arises. The fact is that Beeline, along with the tariff package, widely distributed its Smart Box One branded routers, which were quite good at that time, which were designed to use the Internet only in their network. However, there is a way to save money - to flash the Beeline Smart Box router for all operators. How? I'll tell you now!
Configuring Beeline Smart Box router for all operators
Today you can find a bunch of ads on Avito selling Smart Boxes - at ridiculous prices and in excellent condition with a complete set and box. The fact is that few people know that the Beeline router is easy to set up to work with any provider. It doesn't even require a complicated firmware for beginners.
The secret is that when we enter the control panel under account administrator by default with the username and password admin / admin, which are indicated on the sticker, then the setting WAN port, which is just responsible for choosing the type of Internet connection, is blocked on L2TP for Beeline.
To unlock it, you just need to log into the router from under the super-user.
To do this, open the login page http://192.168.1.1 in the browser and use the pair:
- Login - SuperUser
- Password - Beeline $ martB0x
If these data do not fit, then we try to specify as a password serial number the router indicated on the sticker - it looks like "SFXXXXXXXXXX".
If you are, then read our other article, which understands possible mistakes and suggestions for fixing them
After authorization in the "Advanced settings" section in the "Others" menu, we get full access to all configurations, including the Internet, without any firmware. There are now all types of connections, including via a 3G modem.
