ZTE Blade L110 decoupling from the operator. ZTE Blade L110 uncoupling from the operator Zte l110 firmware w3bsit3-dns.com

ZTE Blade L110 is a brand chinese smartphone which received 0 points for performance. Here you can download firmware (for all operators, firmware ROM), find out how to reset the settings or get root, There are also instructions on the ZTE. This smartphone is in need of additional evaluation. On board - ARM Cortex-A7, 1200 MHz

Specifications

1. Type: Smartphone
2. Operating system: Android 5.1
3. Case type: classic
4. Body material: polycarbonate control: touch buttons
5. SIM type: nmicro SIM
6. Number of SIM-cards: 2
7. Multiple SIM mode: alternate
8. Weight: 110 g
9. Dimensions (WxHxT): 64.6x125x10.4 mm
10. Screen type: color TFT, 16.78 million colors, touch
11. Type of touch screen: multitouch, capacitive
12. nDiagonal: 4 in.
13. Image size: 800x480
14. Pixels Per Inch (PPI): 233
15. Camera: 2 million pixels, LED flash
16. Video recording: yes
17. Front camera: yes, 0.3 million pixels
18. Audio: MP3, FM radio
19. Headphone jack: 3.5mm
20. Standard: GSM 900/1800/1900, 3G
21. Interfaces: Wi-Fi 802.11n, Bluetooth 2.0, USB
22. Satellite Navigation: GPS
23. Processor: ARM Cortex-A7, 1200 MHz
24. Number of processor cores: 4
25. Built-in memory: 8 GB
26. Volume random access memory: 1 GB
27. Memory card slot: yes, up to 32 GB
28. Battery capacity: n1400mAh
29. Charging connector type: micro-USB control: voice dialing, voice control
30. Flight mode: yes
31. Sensors: illumination, proximity
32. Flashlight: yes

»

Firmware for ZTE Blade L110

Official Android firmware 5.1 [stock ROM file] -
ZTE custom firmware -

If you haven't added a custom or official firmware on ZTE, then create a topic on the forum, in the section, our specialists will promptly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. This page will also show the firmware for the ZTE Blade L110. Please note that this ZTE model requires an individual ROM file, so you should not try firmware files from other devices.

What custom firmware are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

Problems and disadvantages of a smartphone from ZTE and how to fix them?

• If Blade L110 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
• If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
• Doesn't charge (usually iron problems)
• Doesn't see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• Sensor does not work (depending on the situation)

Hard Reset for ZTE Blade L110

Instructions on how to do Hard reset on ZTE Blade L110 (factory reset). We recommend that you read the visual guide, which is called on Android. ...

Reset codes (open the dialer and enter them).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset via Recovery

1. Turn off the device-> go to Recovery
2. "Wipe data / factory reset"
3. "Yes - delete all user data" -> "Reboot System"

How do I log into Recovery?

1. hold down Vol (-) [volume down], or Vol (+) [volume up] and the power button
2. a menu with the Android logo will appear. Everything, you are in Recovery!

Factory reset on ZTE Blade L110 can be done in a very simple way:

1. Settings-> Recovery and reset
2. Reset settings (at the very bottom)

How to reset your pattern

How to reset your pattern if you have forgotten it and now you cannot unlock your ZTE smartphone. On the Blade L110, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

How do I update the software?

We provide you different ways software updates, namely: update using a memory card or update "over the air".

To update "over the air", you need to connect to a wireless Wi-Fi network or GSM Internet connection and check for updates in the settings.

What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?

A smartphone is a complex electronic device that includes functions pocket computer and cell phone and consumes a lot of energy for these functions to work. The main amount of energy is spent on the operation of the display module and the GSM transmit-receive path. The brightness of the display is automatically set to maximum in a very bright environment (sunny day) or set by the user to manual mode... Maximum brightness consumes maximum power. During GSM operation and with stable and stable reception "at maximums", the device consumes a minimum amount of energy to maintain communication. In case of an unstable and weak network signal, the machine needs more power to maintain communication. In the case of a "Network Search" in an area without a network, the device consumes the maximum amount of energy, which is spent on searching for the nearest base stations... To reduce the energy consumed by the phone, you need:

1. Disable GPS if not required.

2. Disable Mobile Internet if you don't need it.

3. Disable or remove unnecessary unused applications. they are active and consume the internal resources of the apparatus.

What should you do if the phone freezes, does not turn on or reboots?

Most of the time, third-party software or programs are responsible for restarting or freezing.

1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option in the device menu. If the device does not turn on, turn on the device in " Recovery mode"and select" wipe data / factory reset ". The way to enable" Recovery mode "is described below in" How to enter Recovery mode? ".

2. If a factory reset does not help, update the software. The ways to update the software are described in the section "How to update the software?".

3. If updating the software does not help, contact your nearest Authorized Service center ZTE.

How to make backup data, notebook or Back-up?

There are 3 ways to back up:

1. In the phone settings in the "Restore and reset" submenu, check the box for restore.

2. You can transfer necessary information on a computer using USB cable.

3. You can back up using a third party program.

What if I forgot my password or pattern to unlock the screen?

If you have forgotten your pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in "Recovery mode" and select "wipe data / factory reset". 2. If the procedure is not followed, it is required to contact a ZTE Authorized Service Center.

How to use wireless networks (Wi-Fi, BT)?

1. Turn on Wi-Fi in the device settings. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.

2. The machine will automatically search for active Wi-Fi networks in the access zone from 5 to 50 meters to the access point (depends on the power of the access point).

3. Select the network you need and click on it. If your wireless network is protected by a password, enter it.

4. After connecting to desired network the Wi-Fi icon appears on the main screen of the device.

How to turn on the distribution of the Internet on the phone (USB modem or WiFi router)?

There are two ways to enable tethering on your phone. The first way is to enable sharing as a USB modem, the other is to enable sharing as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:

1. USB modem - the method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings-> Wireless networks-> More" Modem mode - check the USB-modem checkbox. "Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB-modem or simply disconnect the cable connection.

2. WiFi router - make sure you have a stable internet connection through mobile network or USB. "Settings-> Wireless networks-> More" Modem mode - check the "WiFI access point" checkbox. For protection wireless connection click on the hotspot icon then click on "WiFi hotspot". In this menu, you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"

How can I quickly see the charging status?

Press the power button while charging. The battery charge status will be shown on the main screen of the phone.

Why is the volume of free memory of the device less than stated by the manufacturer?

Unlike a processor, which has its own built-in memory, other devices, such as a video processor, an audio processor, and other devices included in the element base of the device's central board consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of an overflow, the user memory is used.

What types of device lock can I use?

There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.

1. Locking with a pattern

2.Pin-code lock 3.Password lock

What is the operating temperature of ZTE phones?

The operating temperature ranges from (-10C) to (+ 50C).

What does ROOT mean?

ROOT is "administrator rights". ROOT allows you to change system files, modify the system, install test programs and take other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling ROOT rights can harm your operating system.

How to enter Recovery mode?

In the off state, simultaneously hold down the volume button (increase +) and the power button.

What if the battery is not 100% charged?

The battery of the device is designed in such a way that it dissipates part of the charge received and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact an Authorized ZTE Service Center.

How can I add Google account into the apparatus?

1. When you turn on the smartphone for the first time, you will be prompted to register new google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time you can register a new or use an existing account: Settings-> Accounts and "add account".

How do I enable USB debugging? How do I get access to the Developers menu?

Enter "Settings-> About phone-> Click on" Build number "a few times. Then you will have access to the" For developers "submenu. In this submenu there are" USB debugging "and other functions for developers

How do I connect my phone to a PC?

Follow the steps below to install the driver (automatically).
1. Connect your phone to your computer.
2. When connected, select " Virtual disk"or" Virtual CD "depending on the model.
3. The computer should determine additional disk, run "Autorun.exe" on it and install the driver
4. If the drivers are not installed, go to "Settings-> For Developers" and enable the "Disk driver". (10 times click on "Build version"
5. When you enable (USB Debugging), the driver will also be automatically installed.

What do the letters E, G, H mean?

When the phone's data transfer is active, the following symbols appear on the status bar (indication of signal reception, battery capacity, etc.):
- E means active work EDGE protocol
- G means active work of the GPRS protocol
- H means the active work of the HSDPA protocol, which is part of WCDMA

Consider one of the ways how you can untie the phone from the operator ZTE Blade L110 (Velcom) aka MTS smart start 3 using firmware.

Necessary:

• Drivers android_spreadtrum_driver.zip
• Flasher program SPD_Upgrade_Tool_R4.0.0001.zip
• Archive with firmware MTS_RUSSIA_MTC_SMART_Start_3_V1.0.2.ZIP

Installing Drivers

Press the "Volume Down" and "Power On" buttons on the phone, connect the microUSB cable and insert the battery without releasing the buttons. A new device will appear in the device manager:

Right-click on the Gadget Serial device, select the items "Update drivers" - "Search for drivers on this computer" by specifying the folder with the drivers, downloaded at the beginning, depending on the bitness of Windows.

When installing drivers, a warning may appear, click "Install this driver anyway"

After finishing the driver installation, possible warning that the driver is installed without digital signature and it will not work correctly. We do not pay attention to this, because we have disabled signature verification and the driver will not be damaged.

If everything is done correctly, a new SCI Android USB2Serial device will appear in the Ports (COM and LPT) section.

IMPORTANT!!! If a yellow exclamation mark appears next to the icon, you have not removed the digital signature verification. And of course, you won't be able to flash it. In this case, uninstall the driver, reboot the system, disable signature verification, and reinstall the driver.

ZTE Blade L110 firmware start

If everything worked out and the result is the same as in the picture above, disconnect the phone from the computer and open the program - the flasher.

Click on the big gear

select file ZTE firmware Blade L110 in * .pac format.

At the bottom of the program window, there should be a strip for downloading the firmware.

When everything is ready, the button with the arrow to the right will become active, click on it.

Press the "Volume Down" and "Power On" keys on the phone again, just as we did before, connect the microUSB and without releasing the keys, insert the battery. The firmware process will start automatically after the program detects the device.

IMPORTANT!!! After the start of the firmware, on some devices the volume and power buttons can be released. But there are times when you release the buttons - the firmware stops with the notification that the device is disabled and the firmware is interrupted. I recommend holding the buttons throughout the entire firmware (no more than 10 minutes).

After the completion of the firmware, an inscription will appear in the flasher "PASSED"... Now you need to disconnect the phone from the computer and reconnect battery... As a result, we get a phone without being tied to the operator and MTS applications.

June 11, 2017 By

ZTE Blade L110 sc7731 Firmware Flash File

Early steps to Install Stock ROM on ZTE Blade L110

1. Download and Install Spreadtrum USB Driver on your Computer
2. Download and Spreadtrum Upgrade Tool on your computer

How To Flash ZTE Blade L110

1. Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
2. Download .pac firmware for your device (Itel, other)
3. Download and extract Spreadtrum Upgrade Tool on your computer.
4. Now, open UpgradeDownload.exe. Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switcheded off).
5. If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
6. Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
7. During the flashing process, your device will restart automatically.
8. Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
9. Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
10. Note after flashing phone on must 5 to 10 mins.
11. During the flashing process, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
12. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait

Instructions for updating software using a memory card