On Windows of any version (XP, 7, 8, 10), a problem often arises when a file or folder with a locked file is not deleted. A message pops up that the file is occupied by another process or open in some program, or you need to ask permission from someone.
There are several ways to delete a file that is not deleted, renamed, or moved. This is done without additional software, using free software Unlocker, from a bootable USB flash drive or LiveCD, or DeadLock.
When deleting locked files and folders, be careful, it may be part operating system... Without them, Windows will stop loading.
Why isn't it deleted?
- The file is open in another program. End all unnecessary processes and try again. Sometimes restarting the computer helps.
- Insufficient rights to delete. For example, this file was created by another user or the computer administrator removed the delete rights.
- pagefile.sys and swapfile.sys - Disable the swap file to remove it.
- hiberfil.sys - Removed when hibernation is disabled.
- If an access denied message appears. You need to take ownership of the file or folder. The easiest way to do it is TakeOwnershipPro.
- If a message appears asking for permission from TrustedInstaller. It protects against the removal of system components.
- Windows.old - folder with old version operating system. It is removed through the "Properties" of the local drive C. On the General tab there is a "Cleanup" button. A window will open in which select "Clear system files". After the analysis is complete, the item "Previous Windows installations" will appear in the list in this window. We put a tick on this item and click OK.
- Before completing the task, open command line as administrator. It is located in "Start - All Programs - Accessories". Right-click on Command Prompt and select Run as Administrator.
- Uncheck the explorer.exe task in the task manager and write full_path / name.extension on the del command line.
- The path does not have to be entered manually. Right click on desired file holding Shift - Copy as a path, and paste it into the command line via the context menu with the right mouse button.
- Now restart explorer.exe. In Task Manager, click File - New challenge- explorer.exe ".
Exceptions
The methods described in the article will not always help:
Delete the file manually
Message: The file is already in use, close and try again.
If the file does not want to be deleted, the error message usually says which process blocked it. It can be explorer.exe or any program that has it open. If you close this program, the file will be deleted.
If the file is occupied by the explorer.exe process
We use a bootable USB flash drive or disk
If you have a bootable USB stick or LiveCD, or Windows recovery, run them and safely delete the file using the standard method or via the command line. 
Be careful, sometimes local drives have different drive letters when entering through the boot disk. To see the list of folders on the C drive, write dir c: in the command line.
If you use bootable USB drive or the Windows installation disk, the console opens at any time after the language selection step by pressing Shift + F10.
You can also select the system recovery mode, which will be offered before starting the OS installation.
The command to delete via the console: del full_path_to_file.
Using DeadLock
The free DeadLock program allows you to remove a locked file and change the owner. Download from the official website: https://codedead.com/?page_id=822.
Use the File menu to add the problem file to the program. Right-click on it in the list - unlock and remove.
We use Unlocker
The simplest and most popular program, but now even the official website displays a warning about unwanted software. Along with the program, there may be some other viral or advertising, so use at your own peril and risk. Try the above methods first. Website: http://www.emptyloop.com/unlocker/.
After installation, a new item will appear in the context menu, which is called Unlocker. After clicking on the button, the program will end the interfering process and the file will be unlocked.
If you want to delete a folder, first delete all of its contents.
Through the command line
There was such a case that the file did not want to be deleted in any way. The size was 0 bytes, the name was written in Russian letters (not supported in older versions of MS-DOS), there was a Read-only attribute and an A attribute (only read and content replenishment). The command line helped.
That's all for now. If you know more simple and effective ways, write them in the comments. Which way helped you?
A common error 0x80070570 can appear as if Windows installation, and in some cases - when deleting a file, folder or group deletion of data. It is almost always associated with problems in the file system or the fact that the system is unable to read some individual clusters. In this article, we will talk about what to do when error 0x80070570 appears - the file or folder is damaged, which appears when you try to delete a file or folder or when uninstalling / installing the program.
Error 0x80070570 - The file or folder is damaged. How to fix?
First, let's decide what kind of media we are talking about. This is a removable portable disk or flash drive or stationary installed disk a computer, divided into partitions, mainly referred to as C or D? The solutions are not always different, but sometimes they differ for technical reasons. Let's discuss them all.Error 0x80070570 when deleting a file or program
The deletion cannot be performed because, most likely, the file system is damaged. To check the file system for errors and try to eliminate them, you need to run the CheckDisk command. To do this, press the following combination: Start - Run - Type in the CMD window that appears and press Enter. Next, in the window that appears, enter the command chkdsk c: / f / r where c: is the disk partition you are trying to delete the file from. If error 0x80070570 occurs when you try to uninstall the program, it is most likely installed on the C drive, and you must specify it accordingly.
Also, the C drive is a system drive and the start of the disk check program cannot be carried out fully when the operating system shell is loaded. If you get a message like this:
The current drive cannot be locked.
The CHKDSK command cannot be executed because the specified volume is in use by another process. Should this volume be checked the next time the system is rebooted?
- enter after Y and press the Enter button.
Checking flash drives is quick, in the process a list of performed recovery functions may appear in the window damaged files and sectors. In any case, this indicates a serious file system problem and should serve as a warning. It is recommended to save the existing information from the disk, as its operability will be questionable in the future.
Error 0x80070570 on removable hard drives
Here the problem may be in the USB cables connecting the HDD. Incorrect data transmission of computer requests to file system hard disk kinking the cord can cause error 0x80070570 to appear. How to fix? - change the cord to begin with. This is for cases when it was not possible to achieve the result after a full check by the Check Disk program described above.it often happens that certain files are not deleted. At the same time, the system writes that this file or the folder is in use by another process. This can happen both in Windows XP and in Windows 7, 8, 10. Today we will look at methods of eliminating a similar problem when files are not deleted.
So, imagine if you installed any program on your computer, used it, and you didn't like it. What are your actions? Delete it, of course. Through uninstallation, the program was allegedly deleted, but the folder with some program files remained. When trying to delete such a file, an error pops up:
Let's take a look at the ways in which you can delete files not deleted by standard means.
1st method. Simplest
If the file is not deleted, restart your computer and try deleting it again. This helps in many cases. If the problem persists, then read below.
2nd way. Task Manager
In the operating system Windows 7 and XP, to get to the Task Manager, you must press the key combination Ctrl + Alt + Del.
In Windows 8 and 10, just press the Windows + X key combination and select Task Manager from the menu that appears.
The Task Manager called by us will open, where you need to find the process that uses the file and remove the task from it. Then try deleting the file again.
3rd way. Usage boot disk or flash drives
The next way is to start the computer from a LiveCD or a bootable USB flash drive and then delete the file or folder. In the first case, we need to use the standard Windows graphical interface to find and delete the required file, or use the command line. If you are using a bootable USB flash drive with Windows 7, 8 or 10, then during installation you can call the command line by pressing Shift + F10. There is also "System Restore", thanks to which you can return the previous state of the computer. By the way, the drive letters may differ, so use the dir c: command to display the contents of that drive. Thanks to this, you can easily understand what kind of local disk it is.
4th method. Deleting files in safe mode
It's very simple. You need to go to safe mode, find the required file or folder and delete. In safe mode, only programs of the operating system are launched, while all your installed third-party utilities (messengers, drivers, antiviruses, etc.) do not start. Therefore, the probability of successful deletion of the required file is very high.
5th method. Usage special program Unlocker
This program, called Unlocker, helps to remove files that are used by any process. A very useful utility that copes with its tasks with a bang. You can download it at https://yadi.sk/d/PkczjpOKjbeje
When the program is loaded, install it.
Next, select Advanced and remove all the jackdaws,
The essence of the Unlocker program is unloading from random access memory processes that are used by the file. The program can find and terminate a process that is even hidden in the Task Manager. In general, an excellent utility that every sysadmin should have.
Description of the problem and its solution.
"Error while deleting file or folder" - Unable to delete file / folder. No access. Disk may be full or write protected
Many have encountered this error: "It is impossible to delete the file because it is being used by another application." After installing Unlocker - this problem will be solved by clicking the right mouse button! Your computer will always be clean of "garbage", there will be more free space. With Unlocker, you can also rename and move files and folders locked by other processes.
You have given error when deleting a file or folder, and you are sure that it can be deleted - here is the solution of the Unlocker program
Attention! In some pirated assemblies type Windows Zver XP, Windows 7 Black Edition etc. The Unlocker program is supplied initially, just not all users know what it is for.
Free download:
Instructions: the program works like this: left-click the required folder or file that you want to delete, a context menu will appear: 
Select item Unlocker. The program will open: 
Select item "Delete" and press the button "Unblock all".
Sometimes you have to press "Delete process"
- the file will be deleted (99.9%)!
Operating room Windows system with a fairly large number of different errors, it can still be surprising. One of the most dangerous surprises is the message “The file or folder is damaged. Reading is impossible "... It is at this moment that the user comes to understand that all stored information on a hard disk or flash drive is under threat of complete erasure. But among the stored information there may be family photos, work projects or others. valuable files.
Error code 0x80070570 when deleting a fileWhy is the "File or folder damaged" error occurring?
Error "The file or folder is damaged. Reading is impossible ”arises for several reasons. The least destructive factor is various software glitches in OS ( broken files, deleted memory sectors due to the influence of antivirus, update curves, and more). You can still try to fix them yourself. But in situations with technical damage to the data carrier, you will just need to buy a new device or incur a breakdown in service center.
If your USB flash drive is not readable by a computer and a corresponding message appears when copying, then it is the medium itself that should be checked. It is unlikely that a conflict arises for a reason Windows... Try multiple surgeries.
The latter option is suitable for rescuing any external or internal storage medium. Apply it to internal and external hard disk drives.
Initially check the disk for errors (follow the steps above). If this method does not help, then use the following tips.
And at the end a small Video instruction with an overview of these methods for hard disk read errors in Windows.
File or folder corrupted: error code 0x80070570
This conflict situation is generally similar to the above failures. Appears error code 0x80070570 when downloading files, installing or uninstalling applications. The solutions are basically the same and may differ only slightly. Let's consider a few of them.
- First of all, check all the points from the above text.
- If the message with the code 0x80070570 appears when copying files from the disk, then the reason may be the presence of cracks in the shell. Try wiping the entire surface of the disc with a dry cloth. The last chance to get information out may be third party applications, CDRoller, for example.
- If a crash pops up when uninstalling a program or game, try using third-party cleaners (CCleaner, for example).
- Clean up your motherboard... Extract as many elements as possible from it. Clean their contacts.
Conclusion
The last option in solving reading problems is to contact service center... This should be done in the case when the stored information has a very great importance, and incorrectly performed actions may lead to their loss. After all, such services are not always cheap.
