The top button on the iphone 4 broke

Replacement Power buttons iPhone 4 is one of the demanded services of our service center... This is due to the fact that this part is constantly exposed to stress, it can break for a variety of reasons - due to moisture ingress, mechanical damage, careless handling of the device, and more.

IPhone 4 Power Button Replacement: A Challenge for Professionals

At first glance, replacing a button Power iPhone 4 is simple and can be done independently. But this opinion is wrong. Despite the fact that the part is located at the top of the case, it is very, very difficult to get to it. To do this, you need to disassemble the smartphone almost completely, which requires the obligatory intervention of professionals. Otherwise, you run the risk of facing a number of problems:

loss of the right to warranty service and repair. Manufacturer mobile devices- American Apple, - has a very negative attitude towards attempts to self-disassemble and repair smartphones;
damage to parts located near the button and those components that need to be removed to reach the target. Because of this, the repair will be significantly complicated, and its cost may increase significantly.

extensive experience of specialists, their high qualifications, which allows them to solve any problems, regardless of their complexity;
high-precision equipment that provides the ability to quickly identify a malfunction and its causes, as well as make a decision on the use of certain repair technologies;
a professional tool that allows you to perform all work with utmost care.

IPhone 4 Power Button Repair Sequence

To use our services, you just need to call the manager, inform him about the problem and agree on a convenient time for the visit of the master. We will do the rest ourselves. A specialist who goes to your home or office will perform the following work:

free diagnostics to identify problems;
dismantling parts to gain free access to the power button - battery, main camera, motherboard and others;
removing the broken Power button;
installation of a new part;
assembling a smartphone and checking its performance.

At the same time, we use only high-quality spare parts that fully correspond to your smartphone model, we can guarantee their excellent work for a long time.

How much does it cost to replace a Power iPhone 4 button?

The exact cost of services for replacing the Power iPhone 4 button is indicated on our website. It can vary only slightly depending on the following factors:

spare parts prices;
the urgency of the order. This repair can be performed without any queue in just 15-20 minutes;
the need to perform any additional repair work.

In any case, contacting us to replace the power button of smartphones from Apple makes it possible to do all the work quickly, efficiently and inexpensively, save your time and money.

To replacement of the "Power" button on iPhone 4s was successful, you will need special knowledge, attention to each operation, as well as a set of tools and the ability to work with them. If you are confident in your capabilities, read the instructions, look at the photos, and only then get down to work on replacing the button in the iPhone 4s.

Step 1. Turn off iPhone and disconnect it from charger... Unscrew the two bolts near the sync connector.

Step 2. Slide the back panel towards the top of the smartphone (approx. 2 mm).

Step 3. Pry off the cover in the place of its protrusion above the body, gently lift up and remove.

Step 4. Remove the screws that secure the battery cable to the motherboard.

Step 5. Disconnect the battery cable from the connector using a plastic spatula.

Step 6. Insert a spatula between the outer frame and the battery and carefully slide it along the battery.

Step 7. Pull on the plastic tab of the battery and detach it from the frame. Remove the battery.

Step 8. Remove the 2 bolts that secure the dock port ribbon cable. Remove the protective plate.

Step 9. Disconnect the docking station cable from the board, as shown in the photo.

Step 10. Disconnect the ribbon cable from the board and dynamics.

Step 11. Disconnect the antenna cable from the board using a spudger. Release the antenna cable from the clips.

Step 12. Use tweezers or a special probe to remove the small plastic ring that is located near the camera flash.

Step 13. Unscrew the 4 screws securing the shielding cover.

Step 14. Using a spatula, pry, lift and remove the shielding cover.

Step 15. Disconnect the camera cable from the board. Remove the camera. To repair iPhone buttons 4s has been successful, care must be taken when handling motherboard: do not damage its components!

Step 16. Using a special tool, remove the SIM holder and SIM card.

Step 17. Prying the connectors with a spatula, disconnect the following cables: headphone, front camera, touchscreen, power buttons.

Step 18.Remove the bolt that secures the grounding plate to the motherboard.

Step 19. Using a spatula (probe), disconnect the ground connector from the motherboard and remove it.

Step 20. Using a flat screwdriver, unscrew the stand shown in the photo.

Step 21 Using a spatula, disconnect the Wi-Fi antenna from the board.

Step 22. Unscrew the bolt, first remove the protective film.

Step 23. Unscrew the stand and bolts securing the board to the smartphone case. Be guided by the photo.

Step 24 Raise very gently motherboard , slide it towards the bottom of the smartphone and remove it.

Step 25. Make sure that the part indicated in the photo is not lost.

Step 26Unscrew the two bolts securing the Power button to the smartphone body.

Step 27.Remove the Power button with tweezers.

With the help of this article, with the necessary knowledge and skills, it is likely that you will be able to independently perform all the technological operations to replace the button in the iPhone 4s. But if you avoid unnecessary risk and value your time, contact an authorized center Apple Service and you will definitely be satisfied with the result of the repair, prices, terms and level of service.

Everyone has Apple smartphones there is a dedicated lock button. It is located at the top of the device. It is very compact, easy to press, allows you to lock or unlock your iPhone. Pressing this button and Home allows you to reboot your device.

Despite the ruggedness and reliability of the fourth generation iPhones, the Power button breaks very often. This can happen after a drop or oxidation of the contacts.

To carry out a high-quality replacement of the Power button iPhone 4, contact our specialists.

Replacing the Power button iPhone 4 - causes of malfunctions

Liquid or dirt has gotten inside the smartphone;
The button is worn out. As a result of long-term operation, the loop membrane has worn out. The factory glue, which was responsible for fastening the membrane, could dry out;
Mechanical impact. If you fall, certain contacts may have moved away;
Unprofessional smartphone repair. The master could damage the loop itself, this provoked a breakdown of the button.

Replacing the Power Button iPhone 4 - signs of breakage

It's hard not to notice the malfunction of this button. No need to look for instructions on how to repair smartphones on the Internet. It is better to entrust such delicate and complex work to our specialists.

Indeed, with self-repair, you can damage the photocell or microphone, which are located on the Power button loop.

The button is no longer pressed. It starts to stick, or simply falls out;
Hard Press - You have to put in extra effort to get the result you want.
The smartphone simply won't turn on;
No automatic screen lock when starting a call.

Replacing the Power button iPhone 4 - stages of work

Remove the two screws at the bottom of the smartphone;
Disconnect the display and all the cables that lead to the motherboard. For this, a suction cup is used;
Unscrew the board fasteners and remove it. Take out the battery and access the button;
Replace damaged items;
Reassemble and test the device.