How to turn on the iPad if it does not turn on. iPad does not turn on - what to do. Deterioration of the power button

Fair, not too high or too low. There should be prices on the Service website. Necessarily! without "asterisks", clear and detailed, where it is technically possible - the most accurate, final.

If spare parts are available, up to 85% percent of complex repairs can be completed in 1-2 days. Modular repairs take much less time. The site indicates the approximate duration of any repair.

Warranty and Liability

A warranty should be given for any repair. Everything is described on the site and in the documents. A guarantee is self-confidence and respect for you. A 3-6 month warranty is good and enough. It is needed to check the quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that you will be helped.

Half the success in Apple repair is the quality and reliability of spare parts, so a good service works directly with suppliers, there are always several reliable channels and a warehouse with proven spare parts for current models so that you do not have to waste extra time.

Free diagnostics

This is very important and has already become a rule of good form for the service center. Diagnosis is the most difficult and important part of the repair, but you should not pay a dime for it, even if you do not repair the device after it.

Service repair and delivery

A good service values ​​your time, so it offers free shipping. And for the same reason, repairs are carried out only in the workshop of the service center: it can be done correctly and according to technology only at a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient in order to be in time before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Age and experience of the company

Reliable and experienced service is known for a long time.
If a company has been on the market for many years, and it has managed to establish itself as an expert, they turn to it, write about it, recommend it. We know what we are talking about, since 98% of incoming devices in the SC are restored.
We are trusted and passed on complex cases to other service centers.

How many masters in the directions

If you are always waiting for several engineers for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of immediately.
2. You give Macbook repair to an expert specifically in the field of Mac repairs. He knows all the secrets of these devices

technical literacy

If you ask a question, the specialist must answer it as accurately as possible.
To give you an idea of ​​what you need.
Will try to solve the problem. In most cases, from the description, you can understand what happened and how to fix the problem.

The iPad may have various problems with the operating system, virus activity and all other ailments, but all this does not matter if iPad won't charge. In this case, after a short period of time, the tablet will turn off and stop turning on. In general, the situation is quite standard for tablets from other manufacturers and smartphones.

Probably, the iPad does not turn on and does not charge due to the fact that there are certain breakdowns at any stage of the charge transfer. Even more often, a situation is observed when, when the device is connected to a PC, a message appears that charging is not in progress. The reason is not at all a breakdown, it’s just that the device has increased requirements for the USB port, and often old computers do not provide a sufficient level of transferred charge, that is, there is not enough power. In reality, the charge still arrives, just extremely slowly and you can notice the result only after a long period of time.

1. It is best to use the original adapter that is included with the device. Thanks to it, the fastest charging and high-quality contact with the tablet are achieved;
2. The device that is used for charging does not always have enough power to perform a quality procedure;
3. When connected to an old PC, a characteristic message appears about the lack of power, although it is supplied, but very slowly;
4. Do not engage in self-repair of the smartphone port, ensure that there is no mechanical damage.

When charging is still not performed, one should resort to determining the technical health of the elements of the electrical circuit.

Causes of failure and solutions

When the iPad mini is not charging, you should proceed to determine the health of the devices. It is best to determine the cause of a breakdown or failure by following the instructions step by step:

1. First of all, the charger is visually inspected. Determine if there are any interruptions in the cable, strong bends, noticeable deformations, damage. It is best to determine whether this is the reason by using another, obviously working, charger;

1. It is also likely that the port has suffered mechanical damage to the pins. This is due to improper, careless handling of the device. Sometimes such a defect becomes the result of other, unintentional damage. You can only fix the problem in an Apple certified center;
2. It is likely that the lower cable is out of order. The standard cause is liquid getting on the device and contact closure. To restore the operation of the device, you must contact the service center to replace the cable;
3. Contamination of the port in the tablet, you can very carefully clean it with a thin metal pin, the one used to open the SIM card cell or a toothpick will do;

1. It is possible that charging does not occur for the reason that the power controller is faulty. A common cause of the problem is the use of third-party chargers, which may not yet be certified;

1. Obviously, in the event of a failure of the outlet, charging will not be performed, check from another outlet;
2. Failure of the board, then the iPad stops not only charging, but also turning on as a whole. In some cases, it is enough to clean the board and everything will work, while in others a repair is required. In any case, the diagnostics and repair procedure is carried out by specialists in the service center.

Correct connection to the power supply

You should immediately take the adapter for charging, the ideal option is the USB cable from the kit. When using a charger from another manufacturer, you need to make sure that it has a certificate from Apple. Followed by:

1. Connect your iPad (or other Apple device) with a Lightning to USB cable. Connection is possible when using a cable with a 30-pin connector;
2. Next, connect to a power source, it is recommended to choose one of the options:

• A regular socket, you must first connect a special device to the adapter for charging through a socket, and then connect it to it;

• You can charge the iPad using a USB connection with a desktop PC or laptop, it must be in an active state. In this case, you can use USB 2.0, 3.0 or 3.1. If there are ports on the keyboard, it is better not to use them, as the circuit loses reliability, an extra load on the keyboard and a lower charging speed are created;
• It is possible to use special docking stations, portable accessories for charging or Power Bank. They need to be certified by Apple.

Force restart

In some cases, iOS may freeze in such a way that it refuses to perceive any external influences. To restore performance, there is a special, forced restart of the iPad. After completing the procedure, the tablet will return to life and will be able to perceive the charge if it does not have mechanical damage to the components of the electrical circuit.

You can restart it by holding down the wake-up button and simultaneously with it the volume rocker to decrease. In older models, you can use the lock button and "Home". Must be held for 10 seconds. before the appearance of the Apple logo.

In some cases, you will have to update the device or roll it back. It is most convenient to restore an iPad using iTunes on a PC, but to get a high-quality result, it is necessary that the devices sync and remember each other first. You may immediately see a notification with a suggestion to restore the tablet, or you will have to go to its menu and select the appropriate item.

Almost always, if the cause is not serious internal problems, the user manages to restore the charge of the device to a normal state or determine the culprit of the failure.

If you still have questions on the topic “Why is the iPad not charging and what to do?”, You can ask them in the comments

The iPad is one of the most reliable tablets around, but even this technique can start to fail over time. What should you do if it does happen? You can contact the service center, buy a new device or try to reanimate the gadget yourself. This article is about solving common problems with iPads.

iPad does not turn on: what to do

Causes of the problem

All of them are divided into four types.

Device charging issues

If the iPad stops turning on, a logo appears on the display, but that's all, most likely, he just sat down. Here you need to check the memory (charger):

1. Blow out the connector to remove dust.
2. Connect the tablet to the complete charger.
3. After a quarter of an hour, try to start it again.

Gadget still won't turn on? There may be a malfunction in the charger itself or the outlet. First you need to try connecting the tablet to a different power source. All you need is a compatible cable. If it does not help, connect some other device to the charger. Devices not charging? So it's in memory. Charging - breakage of the tablet.

Important!Do not try to recharge, for example, with an iPhone cable. This can damage your battery.

Operating system problems

This happens after an update, when the old iPad does not support the new version of iOS. The solution is to restore the previous operating system.

If the user knows for sure that this is not the reason, you need to do the opposite - update the system.

An error occurred after jailbreaking or installing a tweak from Cydia

Common problem. Sometimes after these actions, the iPad starts wildly buggy, stops turning on. Here everything can be fixed with a rollback to the factory settings or a hard reboot.

Hardware failures caused by mechanical impact

Such breakdowns occur for the following reasons:

• moisture got inside the case or the device was dropped;
• there was a short circuit or power surge.

Important! If water gets into the tablet, the screen is broken, the keys do not function, you need to carry the iPad to a service center as soon as possible.

How to fix the problem

What to do if the gadget does not work due to a broken charger or an old one, figured it out. It also tells how to proceed in more complex cases.

Troubleshooting software errors

The easiest way is to do a hard reset. It is able to eliminate software failures.

It is necessary to hold down both the "Home" button and the power key until the apple lights up on the screen.

If after that the iPad continues to be stupid, you can try updating the system or restoring the device.

What to do:

1. Connect the iPad to the computer via USB, while holding "Home"‎.
2. Keep holding the button until the iTunes logo lights up on the display.
3. When the device enters recovery mode, you will need to launch the application.
4. iTunes will offer to update or restore the gadget.
5. First you need to try the first option - this way you can fix the problem and not lose important files.
6. If the device has the latest operating system, all that remains is to restore the device. It is advisable to copy the data to the cloud before doing this. They will disappear from the tablet when restored.

Entering the device into DFU mode

iPad does not turn on even after the above manipulations? We'll have to act even harder. This will require a third party program. No need to worry, it's free.

Most problems can be dealt with on your own. But if the device was severely damaged due to moisture or impact, or the above methods did not work, you need to go to the workshop.

An iPad that has stopped starting is no more useful than a box from under it. However, this is not a sentence yet: if the iPad does not turn on, it can certainly be brought back to life. Sometimes you can do it yourself.

First you need to make sure that the gadget is not discharged. If the battery supply is used up, the tablet should not work. Connect the standard charger, wait at least 15-20 minutes and press the power button. If that was indeed the problem, it should work.

hard reset

Suppose this did not help or the iPad did not initially need to be charged. Then you should hold down the Power and Home keys (the so-called Hard Reset) for 5-10 seconds. If nothing serious has happened, after a few seconds the Apple logo should light up on the screen, after which the tablet will boot up.
Didn't that save it? So the stuffing is wrong. Exactly what - will show inspection. Let's look at the main reasons:

Damage to the power connector

This item does not fail on its own. Usually it is damaged due to careless handling by the user (falling the tablet from a height, trying to insert an incompatible memory plug). Pin connectors are deformed, break out, and as a result, the gadget stops charging. Over time, the supply of energy in the battery runs out, the tablet turns off and, for obvious reasons, does not start back up.

A damaged connector is not repaired. Theoretically, this is possible, but such work will be prohibitively expensive. Much cheaper to replace the part with a working one. In the service center, this procedure will take no more than an hour.

Deterioration of the power button

Any keys are subject to mechanical stress. The more often the buttons are pressed, the faster they become loose. A special case is when the tablet is dropped face down. In such a situation, both the button itself and the cable responsible for its operation may fail.

The work of the master will be to replace the damaged elements.

Moisture ingress

This nuisance hits the client's pocket the hardest. Flowing into the device, the liquid spreads on the contacts, starting the corrosion process. The more moisture has penetrated inside and the more complex its composition, the greater the consequences can be.

If the iPad does not turn on because of this, it is likely that the liquid has got on the contacts of the Power button, cable or circuit board. An accurate picture can be established after diagnosis. Then the terms of repair will be determined: they will be from a couple of hours to a week. The work will include cleaning the tracks from oxides and replacing damaged components.

Short circuits

A striking example is the use of a non-original charger. The charge of electricity is transferred to the power connector, and through it is transmitted to other components. Repair is carried out by replacing defective parts. It will take from 40 minutes to several hours.

The most important thing in case of any iPad failure is not to delay contacting the service center. The less time has passed since the incident, the higher the chances of a successful recovery of the gadget. Professional iPad repair.

Possible malfunctions and cost of the solution:

Repair ipad 2 ~ Maxim ~ 19-09-2016

And how much will it cost to fix the cable on the ipad 2? I just dropped the ipad and now I have a rebit screen and everything else works flawlessly.

Macsave Center response: Maxim, good afternoon!
The cost is 1500 rubles.

...~ Boomchik ~ 02-07-2016

I broke the display of the iPad mini and then it stopped turning on. What should I do?

Macsave Center response: Good afternoon, you need to look and do diagnostics, bring it to us. Our diagnostics are free

Question subject ~ Margarita ~ 30-05-2016

Good day! I sat in the iPad, put it on the lock, I wanted to sit again and it doesn’t turn on, I tried all the methods that are written here, it doesn’t help

Macsave Center response: hello, I need a diagnosis.

IPAD MINI won't turn on ~ Rustem ~ 05/24/2016

Hello! My situation is this. In winter, everything works, but from May to September it doesn’t turn on. At the same time, the stripes are colored, then the apple is distorted, then the screen is multi-colored. Turns on and works. Tried to restore through iTunes. Restored, the problem remained. Bought in 2013. Thanks in advance.

Macsave Center response: Good afternoon, I need to diagnose.

Subject ~ Eugene ~ 19-05-2016

Macsave Center response: Good afternoon, you need to diagnose, maybe you need to flash it.

Subject ~ Dasha ~ 14-09-2015

Please tell me, my ipad turns on and off when charging, and so every five minutes, but there really is no charge? what is the reason?

I greet you, dear users and, undoubtedly, happy owners of the iPad - Apple's tablet computer based on the iOS operating system (at the time of this writing, the latest version is the eighth). If you are a happy owner of any gadget from Apple, for example iPad (2,3, Mini, Air), then most likely you are already used to its stable and reliable operation, and for you the fact that the gadget does not turn on turns you into dead end.

Those people who have never used tablet computers other than the iPad (2.3, Mini, Air) probably do not know that any difficulties or problems may arise during the operation of the device, for example, the device does not turn on.

In today's article, we will analyze the situation when the iPad (2.3, Mini, Air) does not turn on. Those. the device does not react in any way when the “turn on” button is pressed, and even the apple on the glass, black screen does not light up.

Faced with such a situation? Do not rush to panic and look for a screwdriver so that (2,3, Mini, Air), I, in general, categorically do not advise you to disassemble the tablet computer yourself if problems arise, you cannot fix the situation, but you can do even worse. Moreover, if the iPad (2.3, Mini, Air) does not turn on, then this problem can be solved in ninety-nine percent of cases, literally, in five minutes. Below I will tell you what steps you need to take to do this.

Method 1

Of course, I assume that there will be a lot of dissatisfied exclamations now, but trust me - the action described below is the first thing to be done in a situation where your iPad (2,3, Mini, Air) cannot be turned on. Maybe he just ran out of battery power. If you have not tried this method to "reanimate" your device, then do it right now - connect your tablet computer to a power outlet.

If this method did not help and the device does not turn on, move on to heavier artillery.

Method 2

The next step that you need to take to resuscitate your Apple device (in fact, in this way you can bring back to life not only the iPad tablet computer (2,3, Mini, Air), but also the iPhone smartphone) is to press and hold two buttons at the same time: button on/off device and the Home button (the round button at the bottom of the inside of the Apple device) . Press and hold these two buttons simultaneously for at least ten seconds. If after this time the apple does not burn, then proceed to the next method to make the iPad work.

If the apple caught fire, then everything is in order (the gadget turns on), and your iPad tablet computer or iPhone smartphone will work after a certain amount of time (a few seconds).

Method 3

If the previous method did not help and the device still does not turn on, then use a more radical method, namely restoring the iOS operating system using iTunes. It's very easy to do, just follow the steps below.:

• Connect your device (iPad tablet computer or iPhone smartphone) to a personal computer using a USB cable, this cable must come with the Apple device;
• iTunes must be installed on the computer to which you connect the device. If this program is not on your personal computer, then you need to install it. You can do it with this link -