The current computer allows you to connect to itself quite a lot of diverse devices, some of which allow you to turn it into a gaming center. Unconditionally, the mass of joysticks, gamepads and others gaming devices, will make your computer a favorite vacation spot for children, and sometimes adults.
Instruction
1. In some cases, and in order to increase the gaming "power" of your computer, you should think about getting such modern gaming devices as a steering wheel and pedals. Tea what could be better than racing in new races, using the controls that are available to a real racer. Meanwhile, it is worth remembering that any computer device requires certain skills in order to properly connect it, and occasionally configure it.
2. It is also true that in order to connect the steering wheel and pedals to the computer, you will need to carry out some actions. First, it is worth finding out when buying a similar device how and to which port it connects. Usually, modern gaming wheels with a set of pedals are connected with one wire to a free USB port on a computer, however, you should check with the seller if this is the case.
3. You should also think about whether the computer you want to equip with a similar gaming device has an appropriate free USB port. True, if the computer has been in use for some time, traditionally all ports are already busy. They can be connected to a scanner, webcam, printer and a number of other devices. In this case, in order to connect the steering wheel and pedals to the computer, it is worth buying a USB hub, one that will add a few free ports. In the event that not all ports are occupied, there is nothing easier than connecting a new gaming device by simply inserting the cable into the appropriate computer connector.
4. It is worth noting that usually there are no difficulties with connection. An exceptional disappointment that can befall a racing lover is the lack of support for such control devices in your favorite game.
Computer games captivate seriously and for a long time - only in those cases when they imitate some actions as realistically as possible. An example of such games is a variety of sports and transport simulators, and of course, virtual races, in which the functions of real racing cars are actually completely copied today, and when playing such games, you immerse yourself in the atmosphere of the race track, enjoying driving. It is allowed to buy different models of steering wheels and pedals for games in stores, but they are all quite expensive, and if you have certain skills in working with mechanics and electronics, you can make such a device yourself.
Instruction
1. In order to make a working module with pedals, draw, saw out and assemble the casing-base from plywood 12 mm thick in advance, with a gentle bevel for a comfortable setting of the legs.
2. The plywood casing cross bar, installed from the inside, closer to the front sharp corner of the bevel, must be made of hard wood that will hold the tension of the return spring.
3. Use a 12mm thick steel tube to mount the pedal. and the bolts with which you fasten the pedal to the tube.
4. At the bottom of the tube there should be a rod with a diameter of 5 mm., Holding the pedal in the brackets. Make brackets from strong metal corners and fasten them tightly to the base of the casing.
5. When making the transverse bar, which was mentioned just above, measure and cut it so that it correctly matches the width of the pedal module casing and is screwed or glued to its walls and base as tightly as possible.
6. Drill a hole in the cross member and screw a screw with a metal eye into its center, fixed on the reverse side with a nut. Attach the return spring to the lug with one end, and fasten it with the other end to the metal tube to which the pedal is attached.
7. After that, install the pedal potentiometer at the back of the body, on the L-bracket, attaching it on the bushings to the pedal drive so that it can turn 90 degrees in both directions.
8. The design of the pedal module is finished - it remains to connect it to the computer together with the steering wheel and gearbox.
Xbox 360 is the famous game console from Microsoft. This console is now quite famous among gamers because it is comfortable and has good technical collations. The console is equipped with a wireless game controller or, as it is also called, gamepad. If you bought an Xbox console, but do not know how to connect the gamepad to the game console, then this instruction will help you.
Instruction
1. Press the Guide button on your controller. Hold it until the gamepad and game console work.
2. Press and release the power button on the console itself. Hurry up in twenty seconds to press and release the connect button on the gamepad case.
3. Wait until indicator lights next to the power button on the console will not stop blinking. When they stop flashing, it will indicate that the controller has connected.
4. In the event that the gamepad does not turn on, check if the batteries are working. The gamepad requires AA batteries. If they do not work, then insert new ones.
5. You can also use special devices to power the gamepad - Xbox 360 Play & Charge Kit or Xbox 360 Quick charge kit.
6. Up to four gamepads can be connected to one console. Therefore, if you need to connect more gamepads to the console, repeat all the steps for each gamepad. In this case, all of them will be assigned a certain quadrant. Around the console power button and the guide button on the gamepads are four indicators that correspond to the quadrants.
7. To disable the gamepad, press the Guide button and hold it down for three seconds. After this, turn off the gamepad. If you turn off the console, the controller will reconnect itself when you turn it on again.
8. Also keep in mind that the gamepad can only be connected to one console at a time, and in the event that you want to connect it to another console, the connection with the first one will have to be terminated.
9. If the gamepad does not connect, then try to do the following: 1. Turn off the console, and turn it on again after a minute2. Replace the batteries in the gamepad3. All items that are between gamepad and the console, remove, only if these objects are sources of radiation - microwaves, TVs, mobile and wireless home phones, metal and chrome stands, etc. Happy connection and safe gaming!
In order to connect steering wheel To game, you do not need to have any specific knowledge - the connection is actually made in an instant, you just have to configure the control in game in a way that is comfortable for you.
You will need
- - computer
- - steering wheel with pedals
- – a game that supports the connection of a similar device.
Instruction
1. Connecting the steering wheel to the computer. In order to connect steering wheel to a PC, it is enough to connect the USB cable to one of the free ports on your computer. After you do this, connect the pedals to the steering wheel and plug the power supply into a power outlet. Now steering wheel connected to a computer.
2. Game setting for steering. Log in to a game that supports steering mode and enter the settings menu. Here you should prefer the "Management Settings" option. In addition to the "Keyboard Settings" and "Mouse Settings" menus, you will see the "Alternative Control" section - this is exactly what you need. Entering this menu, set the necessary parameters for certain buttons in a way that is comfortable for you. After saving all settings, start a new game.
3. Permissible snags. If after you entered the game the steering remains inactive, there may be two reasons for this: the computer did not detect the device or you did not install the appropriate driver (some models of steering wheels provide for advance installation of the driver on the PC). However, all this can be revealed even at the stage of control settings - if at the time of control setup when trying to change the keys, the steering wheel buttons do not respond, this means that it is inactive. In this case, you need to install the driver on the PC, the one that comes with the device. After installation, repeat all steps of the second step.
The performance of your scanner partly depends on the type of interface used to connect to computer. Various scanner models are connected to computer different methods. Some scanners use a special adapter, one that plugs into motherboard computer. Others connect using a parallel port, or SCSI interface or a USB port.
Instruction
1. Connecting via LPT (parallel port) is a particularly easy method, one that does not require additional hardware. But at the same time, this connection is not designed for high speed data transmission, and consequently this method is normal for inexpensive scanners.
2. SCSI scanners use more ideal SCSI adapters that you can connect to both PC and Macintosh. This connection provides more high data transfer rate compared to LPT models. In the event that the computer does not have a SCSI controller, then manufacturers include special boards in the kit that are prepared for connection to the ISA connector. Keep in mind that some computers may not have an ISA connector, so before buying, you need to make sure that your computer supports this connection.
3. The most modern scanner models use a more high-speed USB interface, one that allows you to connect any device without turning off your computer. This interface may not be available on older computers.
Related videos
With the frenetic rise of the computer and gaming industry, new devices have begun to appear on the market to expand the application of familiar computer games. Such innovations were kits, including steering wheels and pedals. Today, some games require the presence of a steering wheel, one that was also invented in parallel with its land-based counterpart. When connecting these innovations, there may be snags associated with the lack of certain software in the operating system.
You will need
- Interactive car driver kit.
Instruction
1. When installing this device, you should pay attention to the positive step by step connection. As usual, the instruction that comes with this device helps to fully answer all questions related to the connection. You need to connect a new device according to this instruction. If you have a disc with drivers, install them. Connecting this device is allowed to continue with fine tuning.
2. As part of the operating room Windows systems XP has a utility that can help you set up your steering wheel and pedals. Click the "Start" menu - select "Control Panel" - "Gaming Controllers". A new Game Controllers window will appear on the screen. This window displays a list of installed gaming equipment. If you are installing game tools for the first time, the list will be empty. To add a new device, click the Add button.
3. In the "Adding a game controller" window that opens, find the "Game controllers" list and select the type of equipment to be connected. Check the box next to Connect steering wheel and pedals» at the bottom of the menu.
4. In the window that opens, select the type of your device, if your device is not there, click the "Other" button. In the new window, select one of the following options: - joystick; - gaming tablet; - steering wheel or control handle; - control of a racing car.
5. Select the required type and specify the number of directions that your device will use (2 or 4). It is also worth specifying the number of buttons on the panel of your device. Among other settings, it is possible to switch the view type (top view, cockpit view, rear view). To activate this mode, enable the option "There is a POV switch". The last step in setting up a new device is to enter its name in the "Controller" field. After that, click the "OK" button to return to the main "Game Controllers" window.
Today, every PC user has the opportunity to connect a large number of devices to his "chip" friend. Connecting a special steering wheel with pedals will allow you to feel in the world of virtual enjoyment, because. in recent years, this direction does not stand still, but is constantly moving.
You will need
- – IBM PC-compatible computer;
- - computer steering wheel
Instruction
1. The latest innovations in this industry make it possible to notify the driver when the wheels of a car get into mud or when they are worn out. How can the steering wheel do this? Whatever you eat straight - creates a vibration in each steering column. But for the positive operation of this device, it must, first of all, be installed and configured, because. every game transfers its requirements to such devices.
2. Before everyone, you need to learn how to connect a car steering wheel to a computer. The latest models support USB connection, the more recently a new special technology came out - USB 3.0, which can greatly increase the speed of access to additional devices. If you don't have the most a new version steering wheel and it does not support USB connection, and you did not find the necessary connector, purchase a special adapter.
3. After determining the type of connection, you need to make sure that there are free USB ports. As you know, now a large number of devices are being released with USB interface. If you find that there are no free connectors or there is only one of each, try attaching a special delimiter (hub) to the computer.
4. Do not forget that in order to detect and work correctly, you need to install the drivers that, as usual, come with the kit (on the CD). But if they were not there, therefore, they are not necessary or they can be easily downloaded from the Internet - open the manufacturer's web page in the browser and go to the download section, indicating your model (available in the instructions for use).
5. Also, do not forget that at first you connect the steering wheel, and then turn on the game, on the contrary, it may not appear in the gamepad control settings. Please note that many models, when connected positively, include an indication, for example, on the steering wheels of some manufacturers there is a scale for pressing the gas pedal.
6. After starting the game, go to the controller (control) settings and specify the gamepad as an alternative to the keyboard. Here it is possible to configure the purpose of many buttons. Remember that for such a device there is no “clutch” pedal, therefore it must be configured by specifying any of the unused buttons as this pedal.
LPT - a connector used in some printer models, in modern computers, as usual, is absent, which complicates the process of using the equipment. In order to use the LPT printer, you will need to buy a special adapter and set up the software.
You will need
- Adapter LPT-USB.
Instruction
1. Purchase an LPT-USB adapter. You can buy it in a computer store or in the radio market, where all kinds of adapters for such devices are sold. Attach one end of the adapter to the printer cable and secure it. Plug the other end of the wire into your computer's USB port.
2. After connecting, wait for the device to be detected in the system. Most likely everyone, the system does not recognize installed printer, so you will need to download the appropriate device drivers.
3. Insert the disc, the one that came with the printer, into your computer's drive. Wait for the disk to load, then click on the Start menu. Right-click on "Computer" and click on "Properties". On the left side of the window that appears, select "Device Manager" and go to the "Printers" section. Right-click on the unrecognized hardware and select "Update driver", then select "Mechanical search for hardware drivers" and click "Next".
4. If you don't have a disc for your printer, go to the official website of your device manufacturer. Find the "Service and Help" or "Download Drivers" section, then find your printer model and download the appropriate files using the site menu. After downloading, install the downloaded installer by running it on your computer.
5. After installing the driver, reconnect the printer and restart the computer's operating system. Go to "Start" - "Devices and Printers". If your printer is displayed in the selected section, the installation was successful, and you can start printing.
Note!
Some models of motherboards have support for an LPT slot, however, the required connector may not be displayed on the computer case panel. To make sure you have the correct port, refer to your motherboard manual.
Useful advice
You can also buy an LPT cable from a computer store and install it yourself by opening the computer case and inserting the connector into the appropriate motherboard slot. Later, you will be able to connect your printer directly without an adapter.
The global industry of computer applications is developing by leaps and bounds. The main task of developers is to bring the gameplay as close as possible to reality, and many do it very well: modern video games really capture and immerse the user headlong into the world of virtuality. To complement the range of sensations from a well-made game, a high-quality control device will always help. For example, a gamepad for sports simulators, a joystick for flight simulators, or a steering wheel for all kinds of racing. The most technologically advanced racing manipulators are a steering wheel with pedals and a gearbox. In this article, we will try to figure out how to set up a steering wheel with pedals on a computer in order to comfortably play your favorite simulators.
The first step in working with a new device, be it a joystick, a printer, or any other example, is to install the software. We launch the disk that comes with the device, and follow the steps suggested by the installation wizard to install the driver. You can also install new hardware from the control panel. To do this, in the "Control Panel" we find "Hardware Installation", then select our device from the list and click "Next". Then specify the path to the installation file and click OK. The installation will run automatically.
If you do not have the software, you should download it from the developer's website and install the drivers through the control panel or in any other way.
After installing the drivers, we connect our device to the computer. As a rule, the steering wheel is connected using a USB cable.
To make sure that the steering wheel is working properly, open the "Control Panel", select "Game Controllers" and make sure that the "Status" item is labeled "O / S". Next, right-click on "O / C", go to "Properties" and test the performance of the pedals, steering wheel, buttons and switches: when they are activated, everything should be displayed correctly on the screen.
We open the racing simulator, find the control settings and set our manipulator as the main control type. In the same place, in the control settings, we adjust the steering sensitivity, degree of rotation, recoil force and other parameters according to our own feelings. You won’t be able to set up the steering wheel perfectly the first time - the settings must be tested many times during the game, but the result will definitely pay off the effort.
ADVICE. When connected for correct operation devices, it is better to use the branded wire that comes with the kit.
If you are not satisfied with the operation of the device, and this problem cannot be fixed in the game settings, then you can calibrate the manipulator using the built-in utility operating system Windows. To do this, select the "Hardware and Sound" item in the control panel, then open "Devices and Printers", find our manipulator in the list that appears and call the context menu by pressing the right mouse button. In the menu that opens, select "Options" and "Calibrate". The Equipment Customizer window opens, in which you can adjust the necessary properties of the steering wheel, pedals, and buttons.
For some devices, additional utilities are released to make it easier to set up for different games. For example, the Logitech family of wheels has the Logitech Profile software, which allows you to create and customize a profile for each game. If you use this utility, you don't have to dig into the game options - your profile settings are enabled automatically when you start.
Wheel customization for popular games
In a separate chapter, we will highlight the steering wheel settings for some popular computer games. In principle, steering wheels are set up in the same way for all types, according to the above instructions, however, problems appear in some games, so let's dwell on some features of steering wheel settings.
Steering wheel setup features for the Crew simulator
Many users have a question about how to set up a manipulator to play The Crew, due to such problems:
- A slight turn of the steering wheel provokes a sharp maneuver in the game.
- The game only reacts to the maximum steering turn (if you do not turn the steering wheel to the end, the vehicle does not turn in the game).
- When using the Logitech Profile program, saved profile settings do not launch.
Based on user experience and feedback on the Internet, the Logitech Profile program will help solve these problems. You need to create a profile for Crew, and in its properties uncheck the box next to the line "Allow game to adjust settings". This will allow Logitech Profile to disable Crew's in-game settings and use only your customized profile.
Additional effect settings in Logitech Profile
Features of steering wheel settings for GTA game
Many gamers experience problems when connecting a racing paddle to play different versions GTA: GTA 4, GTA 5, GTA San Francisco, GTA San Andreas. The main problem is that the wheel itself is connected, and the pedals in the game do not work.
This is due to the fact that the game Grand Theft Auto is not a racing simulator as such, therefore it is designed specifically for playing on computer keyboard or console gamepad. I will immediately please readers: there is a way out of this situation, but let's do it in order.
Method 1. Trying to set up the pedals through the Logitech Profiler
We launch the installed Logitech Profiler, create a profile for playing GTA and specify the key assignment in the settings: for the accelerator pedal, specify the up arrow on the keyboard, for the brake pedal, the down arrow. Save the settings and start the game. If the game still does not respond to pressing the pedals, go to method #2.
Method 2. Set up the pedals in GTA using a special program
To synchronize the steering wheel with the pedals for the GTA game, a special program has been developed San Andreas advanced control. It can be downloaded from http://www.thegtaplace.com.
San Andreas Advanced Control window
Download the program and install according to the steps suggested by the Setup Wizard. After installation, open it, select our manipulator in the options and configure the steering wheel and pedals for the game.
Conclusion
Game wheels allow us to get the most out of virtual games. If we are setting up a racing simulator, then it usually supports the connection of the steering wheel and all the settings can be done in the game itself. Setting up a game steering wheel is a delicate matter and requires a lot of free time, because only in practice can you determine the correct parameters. If we connect the steering wheel in games that are not adapted to such manipulations, then they will come to the rescue special programs to cheat the system.
The global industry of computer applications is developing by leaps and bounds. The main task of developers is to bring the gameplay as close as possible to reality, and many do it very well: modern video games really capture and immerse the user headlong into the world of virtuality. To complement the range of sensations from a well-made game, a high-quality control device will always help. For example, a gamepad for sports simulators, a joystick for flight simulators, or a steering wheel for all kinds of racing. The most technologically advanced racing manipulators are a steering wheel with pedals and a gearbox. In this article, we will try to figure out how to set up a steering wheel with pedals on a computer in order to comfortably play your favorite simulators.
You can also program these buttons. The only downside is that you only get the wheel. To get pedals, switches and any other peripherals, you will need to lay out more money. However, for the quality of the products, the cost is usually worth it. The wheel includes motors with feedback that give you vitality important information about road conditions in your game. You can also reprogram all buttons according to your preferences.
Behind the wheel and around the corners you get a big dose of adrenaline in real cars. With the right settings, you can get a similar feeling when you're behind a game steering wheel driving a virtual car. Let's see what you need to know and the tools you need. Peripherals There is a fairly large price range for gaming steering wheels. In most cases, it comes down to build quality.
The first step in working with a new device, be it a joystick, a printer, or any other example, is to install the software. We launch the disk that comes with the device, and follow the steps suggested by the installation wizard to install the driver. You can also install new hardware from the control panel. To do this, in the "Control Panel" we find "Hardware Installation", then select our device from the list and click "Next". Then specify the path to the installation file and click OK. The installation will run automatically.
They are also made from high quality materials, sometimes the same materials you find in cars. high class. However, you need to pay attention to the additional peripherals that are included or can be added to the game steering wheel. Most racing peripheral manufacturers try to include everything in one kit and it can be difficult for you to get those wheel setups to your liking. What you really want is a set of gaming steering wheels that comes with pedals, a clutch and a stick change.
If you do not have the software, you should download it from the developer's website and install the drivers through the control panel or in any other way.
After installing the drivers, we connect our device to the computer. As a rule, the steering wheel is connected using a USB cable.
To make sure that the steering wheel is working properly, open the "Control Panel", select "Game Controllers" and make sure that the "Status" item is labeled "O / S". Next, right-click on "O / C", go to "Properties" and test the performance of the pedals, steering wheel, buttons and switches: when they are activated, everything should be displayed correctly on the screen.
All of these parts work together to immerse you in your racing games as nothing else can build a complete simulation. It's surprisingly hard to find a wheel setup that includes all of this at any price range. Benefits With the full customization of the racing wheel, you can experience racing games like never before. This arcade racing game that's so fun because you feel like you're in a car? You can recreate this at home. The best racing wheels give you real power feedback that can mimic road conditions.
We open the racing simulator, find the control settings and set our manipulator as the main control type. In the same place, in the control settings, we adjust the steering sensitivity, degree of rotation, recoil force and other parameters according to our own feelings. You won’t be able to set up the steering wheel perfectly the first time - the settings must be tested many times during the game, but the result will definitely pay off the effort.
You can experience hydroplaning or feel the difference between driving on gravel and hard road. This allows you to tailor the game experience to your needs. It also gives you incredible control over your experience. It contributes greatly to the satisfaction of getting out of the game, it gives you a real sense of ownership.
Limitations No matter how much money you spend, a wheel, pedal, and stick shift cannot fully replicate the racing experience. You won't feel the side effect like in a real car, and you won't feel your car's acceleration when you stomp on the gas. It has to do with how force feedback is created. Essentially, there is an electric motor in the wheel body that generates resistance, which you feel like force feedback. High quality parts are important, but getting the right parts is more important.
ADVICE. When connecting for the correct operation of the device, it is better to use the branded wire that comes with the kit.
If you are not satisfied with the operation of the device, and this problem cannot be fixed in the game settings, then you can calibrate the manipulator using the built-in utility of the Windows operating system. To do this, select the "Hardware and Sound" item in the control panel, then open "Devices and Printers", find our manipulator in the list that appears and call the context menu by pressing the right mouse button. In the menu that opens, select "Options" and "Calibrate". The Equipment Customizer window opens, in which you can adjust the necessary properties of the steering wheel, pedals, and buttons.
Being able to immerse yourself in your racing games isn't particularly hard to do when you have one hand on the wheel, on the other hand to change the stick and your feet working on the pedals. You've invited your friends over for a big game night, but as you sort out your drinks, you notice that you're missing some game controllers.
Don't worry, you can The language is such a cultural totem that its translation doesn't cover all angles. Watch this video for complete steps. Installation means launch. To get around this, things are going to be a little tricky if it eventually succeeds.
For some devices, additional utilities are available to facilitate configuration for different games. For example, the Logitech family of wheels has the Logitech Profile software, which allows you to create and customize a profile for each game. If you use this utility, you don't have to dig into the game options - your profile settings are enabled automatically when you start.
Here are a few people that no one misses. However, you may prefer that you have everything you need, as failure during the initial installation will require the following. In the search field, type "device manager" and press "Enter" to open the desktop app.
From here, open the Device Installation Settings and turn on the "None" option, let me choose. Paste the results into Notepad, then close the Properties window. This may take a while, so be patient - fix your drink or whatever while you wait. If you have a successful installation but don't see the tray icon, don't reboot.
Wheel customization for popular games
In a separate chapter, we will highlight the setting of the steering wheels for some popular computer games. In principle, steering wheels are set up in the same way for all types, according to the above instructions, however, problems appear in some games, so let's dwell on some features of steering wheel settings.
When the installation is completed here, it is recommended that you restart your computer again. The "new device detected" sound should play. When you are sure that everything is ready, the last configuration is required. Have you tried any of these methods? Do you have another console controller that you prefer to use? Keyboard and mouse control, while excellent for many genres, has always been a problem for racing games. The arrow keys do not replace the wheel.
Only one problem; Wheels can be very expensive. You'll want to know what you're buying before you put in that much dough. Here's a quick tour of everything you need to know. This means that there is usually a trade-off in terms of size and rotation. Inexpensive wheels tend to be the smallest and have a spin range that is less than many road machines, while more expensive wheels come close to the real thing.
Steering wheel setup features for the Crew simulator
Many users have a question about how to set up a manipulator to play The Crew, due to such problems:
- A slight turn of the steering wheel provokes a sharp maneuver in the game.
- The game only reacts to the maximum steering turn (if you do not turn the steering wheel to the end, the vehicle does not turn in the game).
- When using the Logitech Profile program, saved profile settings do not launch.
Based on user experience and feedback on the Internet, the Logitech Profile program will help solve these problems. You need to create a profile for Crew, and in its properties uncheck the box next to the line "Allow game to adjust settings". This will allow Logitech Profile to disable Crew's in-game settings and use only your customized profile.
Increasing RPM decreases input sensitivity. Force feedback has been around for years, so you'd expect all racing wheels to be able to offer it - right? This means that the wheel will vibrate like any modern gamepad, but there is no motor inside it, which adds resistance to the wheel.
And you really want this engine. As most people who drive a real car know, bumps and bumps are often felt on the steering column. Although we don't realize it most of the time, the wheel is usually alive with feedback, especially in a car with sporting intent.
Additional effect settings in Logitech Profile
Features of steering wheel settings for GTA game
Many gamers experience problems when connecting a racing paddle to play different versions of GTA: GTA 4, GTA 5, GTA San Francisco, GTA San Andreas. The main problem is that the wheel itself is connected, and the pedals in the game do not work.
If you want to tie it up, you can even take a look at the type of motor the wheel uses and how it is connected to the wheel. And the most expensive wheels use industrial motors that can generate very strong forces, an effect you'll notice the next time you slide off the track. A wheel is generally useless without pedals, which is why most of them come as a kit. If you're buying an inexpensive wheel, you can expect mundane plastic pedals supported by a small spring, belt, or rubber band.
This is because the game grand theft Auto is not a racing simulator per se, so it was designed specifically to be played on a computer keyboard or console gamepad. I will immediately please readers: there is a way out of this situation, but let's do it in order.
Method 1. Trying to set up the pedals through the Logitech Profiler
We launch the installed Logitech Profiler, create a profile for playing GTA and specify the key assignment in the settings: for the accelerator pedal, specify the up arrow on the keyboard, for the brake pedal, the down arrow. Save the settings and start the game. If the game still does not respond to pressing the pedals, go to method #2.
This works fine, but it's not the most durable choice. It will be highlighted in yellow as shown in the image next to it. . If you try to use the latter it won't work. Of course, you're not quite done yet. Of course, you'll want to use this method at your own risk. Then follow the steps below to check if the controller is properly connected.
Here you can test the functionality of the controller by moving the joystick on the controller or pressing various buttons. The LEDs on the controller and receiver now flash green when a connection is established. Once they are solid green and stop flashing, the connection has been successfully established and the controller is ready for use.
- Finally, confirm your input.
- Each action should light up in the application on the screen.
- Then press the connect button on the back of the controller.
Method 2. Set up the pedals in GTA using a special program
To synchronize the steering wheel with the pedals for the GTA game, a special San Andreas Advanced Control program has been developed. It can be downloaded from http://www.thegtaplace.com.
But one thing is already in advance: additional hardware is required to work on a computer. In the version for sale of a separate gamepad, the cable is already included. All buttons and analog sticks can be tested for functionality by pressing the corresponding button when you press them. Connect it to your computer and wait for the installation wizard to appear. Now install the software "automatically". If the backlight is on continuously, the controller is ready for operation.
You can even use touch panel as a mouse. . Set up your profile. Test your control in the game. Let's learn how to set up a joystick on a computer. What is the use of installing a joystick? Joystick installation for.
- Playing a video game with a joystick on a computer.
- Use the joystick as a remote control.
- Use the joystick like a mouse.
San Andreas Advanced Control window
Download the program and install according to the steps suggested by the Setup Wizard. After installation, open it, select our manipulator in the options and configure the steering wheel and pedals for the game.
Conclusion
Game wheels allow us to get the most out of virtual games. If we are setting up a racing simulator, then it usually supports the connection of the steering wheel and all the settings can be done in the game itself. Setting up a game steering wheel is a delicate matter and requires a lot of free time, because only in practice can you determine the correct parameters. If we connect the steering wheel in games that are not adapted to such manipulations, then special programs will come to the rescue that allow us to deceive the system.
Click the joystick icon in the left upper corner. Click the "Image" tab. Click "open" and select your joystick image if available. Same procedure as for the stick. Go to the "Buttons" tab and press all available buttons on the joystick.
Installation of game devices
When you press the button on the joystick, you will see a small box. Arrange them to move on to the next step. Go to the Trigger tab. The same procedure as the joysticks, the points are "on" and follow the procedures. Now let's move on to the configuration. This type of window will appear.
Car simulators allow you to race without risk to your life, developing crazy speed and leaving behind unfortunate rivals. However, using the keyboard to control the car is not so interesting; the steering wheel is another matter - here the realism of control is already off scale.
But before you start racing through the streets of the city and rough terrain, forcing opponents to swallow the dust, you need to figure out how to connect the steering wheel to the computer.
To set up a click on it, it will appear virtual keyboard. You will notice the presence of keys next to the joystick indicating the preset configuration. Click and confirm "mouse arrows" to control the mouse with this joystick.
Using the wireless adapter
Save the settings, and once your joystick is connected, the settings will be effective. Depending on a few games or others, we may be more comfortable using the keyboard and mouse to play than using other methods as a handle. However, each time the games are easier to control and tailored to the team as they tend to be multi-platform and have their respective console versions. However, to ensure proper game control, it is possible that we should calibrate the handle by assigning 0 to the zero values of the handle.
Connection
It is important to decide at the stage of choosing a game controller in which games it will be used. If you are going to install Truckers 2 on Windows 7, then enough functionality the simplest wheel.
If you will play the latest generation simulators, it is better to immediately choose controller models that are more powerful and more functional. For example, Logitech Driving Force GT - it is compatible with PC, PS2 and PS3. So you can connect your PS3 to your computer and enjoy your favorite game on the big screen.
But first you will have to assemble a game controller. Its completeness depends on the model: it can be just a steering wheel; steering wheel and pedals; steering wheel, pedals and gearbox. The process of installing the steering wheel itself should not cause difficulties for the average user. If you've connected a gamepad to a computer, you'll be fine with another type of game controller.
Almost all steering wheels are connected to a computer via a USB interface.
V latest models uses USB 3.0 technology, but you can install them in USB 2.0 ports (backwards compatible).
Once connected, you'll see a notification that Windows has detected a new device. You will be prompted to insert a driver disc and install the necessary software for the hardware to work correctly. Follow these guidelines.
If you do not have a disk software, download the drivers from the official website of the game controller manufacturer. The main thing here is to correctly specify the device model in order to download the appropriate drivers.
Setting
After connecting the game controller, you need to configure it.
This is done directly in the car simulator: in the "Settings" menu there should be a special section dedicated to adjusting the parameters of the connected controller.
Important! The game should be launched only after the steering wheel is connected. Otherwise, the controller in the simulator simply will not be determined, and you will not be able to use it.
In the game settings, you will most likely have to specify the purpose of the buttons and pedals. During the operation of the controller, you will quickly figure out how best to customize it for yourself, so it's pointless to advise anything here.
The global industry of computer applications is developing by leaps and bounds. The main task of developers is to bring the gameplay as close as possible to reality, and many do it very well: modern video games really capture and immerse the user headlong into the world of virtuality. To complement the range of sensations from a well-made game, a high-quality control device will always help. For example, a gamepad for sports simulators, a joystick for flight simulators, or a steering wheel for all kinds of racing. The most technologically advanced racing manipulators are a steering wheel with pedals and a gearbox. In this article, we will try to figure out how to set up a steering wheel with pedals on a computer in order to comfortably play your favorite simulators.
The first step in working with a new device, be it a joystick, a printer, or any other example, is installing software. We launch the disk that comes with the device, and follow the steps suggested by the installation wizard to install the driver. You can also install new hardware from the control panel. To do this, in the "Control Panel" we find "Hardware Installation", then select our device from the list and click "Next". Then specify the path to the installation file and click OK. The installation will run automatically.
If you do not have the software, you should download it from the developer's website and install the drivers through the control panel or in any other way.
After installing the drivers, we connect our device to the computer. As a rule, the steering wheel is connected using a USB cable.
To make sure that the steering wheel is working properly, open the "Control Panel", select "Game Controllers" and make sure that the "Status" item is labeled "O / S". Next, right-click on "O / C", go to "Properties" and test the performance of the pedals, steering wheel, buttons and switches: when they are activated, everything should be displayed correctly on the screen.
We open the racing simulator, find the control settings and set our manipulator as the main control type. In the same place, in the control settings, we adjust the steering sensitivity, degree of rotation, recoil force and other parameters according to our own feelings. You won’t be able to set up the steering wheel perfectly the first time - the settings must be tested many times during the game, but the result will definitely pay off the effort.
ADVICE. When connecting for the correct operation of the device, it is better to use the branded wire that comes with the kit.
If you are not satisfied with the operation of the device, and this problem cannot be fixed in the game settings, then you can calibrate the manipulator using the built-in utility of the Windows operating system. To do this, select the "Hardware and Sound" item in the control panel, then open "Devices and Printers", find our manipulator in the list that appears and call the context menu by pressing the right mouse button. In the menu that opens, select "Options" and "Calibrate". The Equipment Customizer window opens, in which you can adjust the necessary properties of the steering wheel, pedals, and buttons.
For some devices, additional utilities are released to make it easier to set up for different games. For example, the Logitech family of wheels has the Logitech Profile software, which allows you to create and customize a profile for each game. If you use this utility, you don't have to dig into the game options - your profile settings are enabled automatically when you start.
Wheel customization for popular games
In a separate chapter, we will highlight the steering wheel settings for some popular computer games. In principle, steering wheels are set up in the same way for all types, according to the above instructions, however, problems appear in some games, so let's dwell on some features of steering wheel settings.
Steering wheel setup features for the Crew simulator
Many users have a question about how to set up a manipulator to play The Crew, due to such problems:
- A slight turn of the steering wheel provokes a sharp maneuver in the game.
- The game only reacts to the maximum steering turn (if you do not turn the steering wheel to the end, the vehicle does not turn in the game).
- When using the Logitech Profile program, saved profile settings do not launch.
Based on user experience and feedback on the Internet, the Logitech Profile program will help solve these problems. You need to create a profile for Crew, and in its properties uncheck the box next to the line "Allow game to adjust settings". This will allow Logitech Profile to disable Crew's in-game settings and use only your customized profile.
Additional effect settings in Logitech Profile
Features of steering wheel settings for GTA game
Many gamers experience problems when connecting a racing paddle to play different versions of GTA: GTA 4, GTA 5, GTA San Francisco, GTA San Andreas. The main problem is that the wheel itself is connected, and the pedals in the game do not work.
This is due to the fact that the game Grand Theft Auto is not a racing simulator as such, therefore it is designed specifically for playing on a computer keyboard or console gamepad. I will immediately please readers: there is a way out of this situation, but let's do it in order.
Method 1. Trying to set up the pedals through the Logitech Profiler
We launch the installed Logitech Profiler, create a profile for playing GTA and specify the key assignment in the settings: for the accelerator pedal, specify the up arrow on the keyboard, for the brake pedal, the down arrow. Save the settings and start the game. If the game still does not respond to pressing the pedals, go to method #2.
Method 2. Set up the pedals in GTA using a special program
To synchronize the steering wheel with the pedals for the GTA game, a special San Andreas Advanced Control program has been developed. It can be downloaded from http://www.thegtaplace.com.
San Andreas Advanced Control window
Download the program and install according to the steps suggested by the Setup Wizard. After installation, open it, select our manipulator in the options and configure the steering wheel and pedals for the game.
Conclusion
Game wheels allow us to get the most out of virtual games. If we are setting up a racing simulator, then it usually supports the connection of the steering wheel and all the settings can be done in the game itself. Setting up a game steering wheel is a delicate matter and requires a lot of free time, because only in practice can you determine the correct parameters. If we connect the steering wheel in games that are not adapted to such manipulations, then special programs will come to the rescue, allowing us to deceive the system.
Car simulators allow you to race without risk to your life, developing crazy speed and leaving behind unfortunate rivals. However, using the keyboard to control the car is not so interesting; the steering wheel is another matter - here the realism of control is already off scale.
But before you start racing through the streets of the city and rough terrain, forcing opponents to swallow the dust, you need to figure out how to connect the steering wheel to the computer.
Connection
It is important to decide at the stage of choosing a game controller in which games it will be used. If you are going to install Truckers 2 on Windows 7, then the functionality of the simplest steering wheel will suffice.
If you will play the latest generation simulators, it is better to immediately choose controller models that are more powerful and more functional. For example, Logitech Driving Force GT - it is compatible with PC, PS2 and PS3. So you can connect your PS3 to your computer and enjoy your favorite game on the big screen.
But first you will have to assemble a game controller. Its completeness depends on the model: it can be just a steering wheel; steering wheel and pedals; steering wheel, pedals and gearbox. The process of installing the steering wheel itself should not cause difficulties for the average user. If you've connected a gamepad to a computer, you'll be fine with another type of game controller.
Almost all steering wheels are connected to a computer via a USB interface.
The latest models use USB 3.0 technology, but you can install them in USB 2.0 ports (backwards compatible).
Once connected, you'll see a notification that Windows has detected a new device. You will be prompted to insert a driver disc and install the necessary software for the hardware to work correctly. Follow these guidelines.
If you do not have a software disc, download the drivers from the official website of the game controller manufacturer. The main thing here is to correctly specify the device model in order to download the appropriate drivers.
Setting
After connecting the game controller, you need to configure it.
This is done directly in the car simulator: in the "Settings" menu there should be a special section dedicated to adjusting the parameters of the connected controller.
Important! The game should be launched only after the steering wheel is connected. Otherwise, the controller in the simulator simply will not be determined, and you will not be able to use it.
In the game settings, you will most likely have to specify the purpose of the buttons and pedals. During the operation of the controller, you will quickly figure out how best to customize it for yourself, so it's pointless to advise anything here.
Setting up a game wheel on a computer includes installation, calibration, verification and editing. It is undesirable to skip any item if you want to get the most out of the game. Let's consider all the stages in order.
Installation. In other words, the installation of equipment. Typically, gaming devices are connected to a USB port and support automatic installation. After each installed driver, a tray alert appears. When the device is fully recognized, the computer will notify you of the successful completion of the process and prompt you to start the calibration. The installation of the steering wheel, pedals and joystick is similar to the usual connection of a USB mouse and keyboard. If for some reason the hardware was not recognized, then install the drivers. You can download them from the official website of the manufacturer of the gaming product or from the disk that is included in the steering wheel box. The success of the operation is 95%. If this method did not help, then perform the installation manually. Call the "Device Manager" through the "Start" menu and the "Control Panel" button. Next, select the category "Hardware and Sound" or immediately click "View Devices and Printers".
A new window lists all the devices that are connected to this computer, among them there should be a steering wheel. If this does not appear, then click the "Add device" button and wait for the search for unidentified equipment. Click on the game device icon and follow the installation instructions.
Before buying a steering wheel and pedals, make sure that the game is compatible with the device to avoid trouble in the future. And to prolong the service life of the gaming device, we advise you to avoid kinking wires, pulling out of the USB port, steering wheel drops and spilling liquid on the equipment.
To connect steering wheel correctly, you need to carefully study the attached instructions, especially regarding its connection to a computer. Most manufacturers of gaming devices supply them with CDs with the necessary distribution kit. It must be installed in the drive Computer CD-ROM and follow the installation prompts. But the Windows operating system itself can connect gaming devices using a special utility. To use this method, you need to connect the steering wheel to the appropriate port on the computer using the supplied connecting wires. Then sequentially, using the mouse, execute the following commands: "Start" - "Control Panel" - "Printers and other equipment" - "Gaming devices". The Game Controllers dialog box will appear on the screen. The Installed Game Controllers field will be blank by default. Click the "Add" button. A new Add Game Controller window will present a large list of well-known manufacturers and their game devices. When connecting a racing steering wheel for car simulators, pedals are often included. In such a situation, you need to select the manufacturer and additionally activate the "Connect steering wheel and pedals" function. If there is no installed model in the list, then you have to connect the steering wheel yourself. At the bottom of the window there is a button "Other". We press it, and a window opens in which you need to specify the features of the gaming equipment: a joystick, a game tablet, a steering wheel or a control of a racing car. You will also need to specify the number of buttons on the steering wheel and "Degree of freedom" - this is the number of directions in which the steering wheel or joystick can move. For modern car simulators and racing arcades, the function of switching the player’s view, which is customizable on the steering wheel, will be useful - “cockpit view”, “top and rear view”, “top view” and “general view”. To do this, check the box next to the POV switch. To complete the procedure for connecting the steering wheel, you must enter its name in the "Controller" field so that it is displayed in the list of connected equipment. After that, activate the OK button, and in the Game Controllers dialog box, also click OK. Windows will automatically finish installing the game controller.
To connect steering wheel To game game in a way convenient for you.
You will need
- - computer
- - steering wheel with pedals
Instruction
Game setting for steering. Log in to a game that supports steering mode and enter the settings menu. Here you should select the "Management Settings" option. In addition to the "Keyboard Settings" and "Mouse Settings" menus, you will see the "Alternative Control" section - this is exactly what you need. Entering this menu, set the desired parameters for certain buttons in a way that suits you. After saving all settings, start a new game.
Possible problems . If the steering wheel remains inactive after you enter the game, there may be two reasons for this: the computer did not detect the device or you did not install the appropriate driver (some models of steering wheels require the driver to be installed on the PC first). However, all this can be identified even at the stage of control settings - if at the time of control setup when trying to change the keys, the steering wheel buttons do not respond, this means that it is inactive. In this case, you need to install the driver that comes with the device on the PC. After installation, repeat all steps of the second step.
Computer games with the ability to use the steering wheel allow the player to feel like a real driver. However, before you sit on the "driver's seat", you must adjust the steering wheel.
You will need
- A game that supports steering mode and the steering wheel itself.
Instruction
Installation games that supports the steering function. Insert the disc with the game you want to install on your computer into the drive. When installing, select the desired destination folder for games, then continue unpacking files into it. Once the game is installed on the PC, you can start customizing the steering wheel.
Steering wheel settings.
Run, then open the "Options" section. Here you need to go to the Control Settings menu. In the window that opens, you will see three sections: "Mouse settings", "Keyboard settings" and "Alternative control". For steering wheel settings, you need to open the "Alternative control" menu. You can understand the further process yourself - by clicking on the “Gas” action and, after waiting for the option to change the parameter, press the gas pedal. When changing the rotation settings, rotate steering wheel to the appropriate side. You can also set specific options for the steering wheel buttons. After all the changes, do not forget to save the new settings. Now you can enjoy plenty of exciting driving around the virtual city.
Sources:
- steering wheel games
Due to the rapid development of the computer and gaming industry, new devices began to appear on the market for the extended use of familiar computer games. Such innovations were kits, including steering wheels and pedals. Today, some games require a steering wheel, which was also invented in parallel with its land counterpart. When connecting these innovations, problems may arise due to the lack of specific software in the operating system.
You will need
- Interactive car driver kit.
Instruction
When installing this device, you should pay attention to the correct step-by-step connection. As a rule, the instruction that is included with this device helps to fully answer all questions related to the connection. It is necessary to connect a new device according to this instruction. If you have a disc with drivers, install them. Connecting this device can be continued by fine tuning.
As part of the Windows XP operating system, there is a utility that can help you set up the steering wheel and pedals. Click the "Start" menu - select "Control Panel" - "Game Controllers". A new Game Controllers window will appear on the screen. This window displays a list of installed gaming equipment. If you are installing game tools for the first time, the list will be empty. To add a new device, click the Add button.
In the "Add a game controller" window that opens, find the "Game controllers" list and select the type of equipment to be connected. Check the box next to Connect steering wheel and pedals» at the bottom of the menu.
In the window that opens, select the type of your device, if your device is not there, click the "Other" button. In the new window, select one of the following options:
- joystick;
- gaming tablet;
- steering wheel or control handle;
- control of a racing car.
Select the desired type and specify the number of directions that your device will use (2 or 4). It is also worth specifying the number of buttons located on the panel of your device. Among other settings, you can switch the view type (top view, cockpit view, rear view). To activate this mode, enable the option "There is a POV switch". The last step in setting up a new device is to enter its name in the "Controller" field. Then click the OK button to return to the main Game Controllers window.
If you want to feel in the shoes of a street racer without problems with the government or drive a car that is initially unrealistic to drive on Russian roads, all you really need is not the necessary acquaintances and a large amount of money, but just a powerful computer and properly selected steering wheel. With the choice of the first, everything is quite simple, but in order to make the right choice of a car driving simulator, remember a few important things.
And sometimes adjust.
In the same way, in order to connect the steering wheel and pedals to the computer, you will need to follow some steps. First, it is worth finding out when buying such a device how and to which port it connects. Usually, modern gaming wheels with a set of pedals are connected with one wire to a free USB port on the computer, however, you should check with the seller if this is the case.
You should also think about whether the computer you want to equip with such a gaming device has an appropriate free USB port. Although if the computer has been in use for a while, usually all ports are already occupied. They can be connected to a scanner, webcam, printer and a number of other devices. In this case, in order to connect the steering wheel and pedals to the computer, it is worth purchasing a USB hub, which will add a few free ports. In case not all ports are occupied, there is nothing easier than connecting a new gaming device by simply inserting the cable into the appropriate connector on the computer.
It is worth noting that usually there are no difficulties with connection. The only disappointment that can befall a racing lover is the lack of support for such control devices in your favorite game.
Computer games capture seriously and for a long time - especially in those cases when they imitate any actions as realistically as possible. An example of such games is a variety of sports and transport simulators, and of course, virtual races, in which the functions of real racing cars are almost completely copied today, and when playing such games, you immerse yourself in the atmosphere of the race track, enjoying driving. You can buy various models of steering wheels and pedals for games in stores, but they are all quite expensive, and if you have some skills in working with mechanics and electronics, you can make such a device yourself.
Instruction
At the bottom of the tube there should be a rod with a diameter of 5 mm., Holding the pedal in the brackets. Make brackets from strong metal corners and screw them firmly to the base of the casing.
When making the cross bar mentioned just above, measure and cut it so that it exactly matches the width of the pedal module casing and is screwed or glued to its walls and base as firmly as possible.
Drill a hole in the cross member and screw a screw with a metal eye into its center, fixed on the reverse side with a nut. Attach the return spring to the lug with one end, and fasten it with the other end to the metal tube to which the pedal is attached.
Then mount the pedal potentiometer at the back of the case, on the L-bracket, attaching it with grommets to the pedal actuator so that it can rotate 90 degrees to either side.
Xbox 360 is a popular game console from Microsoft. This console is now quite popular among gamers, as it is convenient and has excellent technical characteristics. The console is equipped with a wireless game controller or, as it is also called, gamepad. If you have purchased an Xbox set-top box for yourself, but do not know how to connect a gamepad to a game console, then this instruction will help you.
Instruction
Simply press and release the power button on the console itself. Have twenty seconds to press and release the connect button on the body of the gamepad.
Wait until the lights next to the power button on the console stop flashing. When they stop flashing, it will mean that the controller is connected.
In the event that the gamepad does not turn on, check if the batteries are working. The controller requires AA batteries. If they do not work, then insert new ones.
You can also use special devices to power the gamepad - Xbox 360 Play & Charge Kit or Xbox 360 Quick Charge Kit.
Also keep in mind that the gamepad can only be connected to one console at a time, and in the event that you want to connect it to another console, the connection with the first one will have to be interrupted.
If the gamepad does not connect, then try the following: 1. Turn off the console, and turn it on again after a minute
2. Change the batteries in the gamepad
3. All items that are between gamepad and console, remove, especially if these objects are sources of radiation - microwave ovens, televisions, mobile and wireless home phones, metal and chrome racks, etc. Good luck with your connection and good luck playing!
To connect steering wheel To game, you do not need to have any specific knowledge - the connection is made almost instantly, you just have to configure the control in game in a way convenient for you.
You will need
- - computer
- - steering wheel with pedals
- - a game that supports the connection of such a device.
Instruction
Game setting for steering. Log in to a game that supports steering mode and enter the settings menu. Here you should select the "Management Settings" option. In addition to the "Keyboard Settings" and "Mouse Settings" menus, you will see the "Alternative Control" section - this is exactly what you need. Entering this menu, set the desired parameters for certain buttons in a way that suits you. After saving all settings, start a new game.
Possible problems. If the steering wheel remains inactive after you enter the game, there may be two reasons for this: the computer did not detect the device or you did not install the appropriate driver (some models of steering wheels require the driver to be installed on the PC first). However, all this can be identified even at the stage of control settings - if at the time of control setup when trying to change the keys, the steering wheel buttons do not respond, this means that it is inactive. In this case, you need to install the driver that comes with the device on the PC. After installation, repeat all steps of the second step.
The efficiency of your scanner depends in part on the type of interface used to connect to computer. Different scanner models are connected to computer different ways . Some scanners use a special adapter that plugs into the computer's motherboard. Others connect using a parallel port, or a SCSI interface, or a USB port.
Instruction
SCSI scanners use more advanced SCSI adapters that you can connect to both PCs and Macintosh. This connection provides a higher data transfer rate than LPT models. In the event that the computer does not have a SCSI controller, then manufacturers include special boards in the kit that are designed to be connected to the ISA connector. Please be aware that some computers may not have an ISA connector, so please make sure your computer supports this connection before purchasing.
How is it, in the famous newsreel "I want to know everything" - "The nut of knowledge is hard, but still ..." and so on. Yes, we can also recall the once very good magazine "Knowledge - Power" that was once published. No, that's right, that's right, knowledge is a big thing. But sometimes they can only hurt. You suddenly begin to philosophize, to be afraid of who knows what, seeing the same steering wheel or pedal in front of you, although in reality everything is elementary simple. No need to just, as they say, take too much into your head.
You see, that “knowledgeable scientist, with experience” was fumbling with the steering wheel for an hour. And this boy, a week without a year on the computer, solves the problem of how to connect the steering wheel with pedals to the computer in just 10 minutes. So his blue eyes are open at 100, smile from ear to ear, he is not afraid of anything and almost spilled coffee on brand new pedals, and his hands are shaking from one kind of boxes and he looks, well, terribly serious.
In other words, what do we want to say? Yes, the fact that in order to connect the steering wheel to a computer, you need the joy of life, about the joy for which these devices themselves are intended.
Okay, for those who are used to living “like in a bishop’s system,” let’s say that installing and configuring the steering wheel and pedals is practically no different from installing any other equipment, the same printer or scanner.
So, let's get started, and, as always, this saving USB port helps us. First, we connect the cables and connectors. Here, be more attentive, and we advise you not to neglect the schemes that are full of installation instructions included in the device delivery set. Diagrams and help you quickly decide how to connect game steering wheel.
We connect the steering wheel and pedals to each other - there are different designs: the steering wheel to the pedal and further to the laptop, the pedal to the steering wheel, this does not matter in principle. The main thing is that when we insert the cable into the USB port of the laptop, the devices will automatically be recognized. Ideally, the whole process will end immediately within 20–30 seconds, and you will only be surprised by such simplicity in the lower right corner of the screen to read the phrase caressing your eyes: “The device is installed and ready to go.”
And yet we will not offend the steering wheel, this is not a flash drive
But frankly, the steering wheel and pedals are still not a flash drive, things may not come to such elementary things. Moreover, most likely, the phrase will be different, something like “Device not ready” or “Device not recognized”.
Nothing to worry about, this is the normal course of things. This means that the system did not recognize your racing accessories, does not have drivers for them and offers to install them yourself.
To do this, insert the disk with the steering wheel and pedals software into the CD drive, this disk is included in the product delivery set. The hardware installer from the disk starts automatically. Install all drivers and programs, perhaps restart the computer.
Therefore, to test the installation, you need to run some game and try to control the steering wheel already, not forgetting to slow down and accelerate with the pedals.
Configuration by means of the system
Well, if there is no favorite race on the PC yet.
Then you can check the results of the installation and the system.
Go to the "Control Panel" "Start" and select "Hardware and Sound".
In the window that opens, we need "View devices and printers" - here we will see all connected devices, including our steering wheel.
If there is no steering wheel yet, add it through the “Add” button (you need to search for it on the screen, it all depends on the system version and the window presentation style).
The system itself will try to find new devices and offer everything in a single list. Select the steering wheel in it and click "Next". The device will install - most likely, the system will install the driver from its library (repository) of drivers, which was filled from the CD.
But the steering wheel is not enough to install. When you start the game, it will not work with either the steering wheel or the pedals. Yes, you just need to teach the game itself to respond to all turns of the steering wheel and pressing the pedals. But this is a completely different song, it depends on which foot the program developers themselves got up on, here we usually go to the “Game Settings” and carefully look at the screen, in this hobby without spilling coffee on the keyboard.
Connecting the command line
Steering wheel calibration can also be carried out by simpler means:
There is another way:
- We now enter the "Start / Control Panel / Hardware and Sound".
- Let's go to the section of gaming devices.
- Select the desired one and again through the context menu - "Properties".
- The "Settings" window opens, and in it the "Calibrate" button.
You don’t need to be seven spans in your forehead to understand that setting up the steering wheel and pedals is a delicate matter (well, Lamborghini motorists know this), so you need to stock up on attention and patience at this stage.
Well, then we rush into this boundless sea of games, where the steering wheel and pedals are real kings, or rather, they will make you kings: AutoClubRevolution, DriverParallelLines, TestDriveUnlimited, Richard Burns Rally, Live For Speed.
Among the listed is not your favorite. Sorry, didn't know! And what can you know in general in this whirlwind of collections of tracks and models that appear almost every day new ones like mushrooms after rain.
