The vast majority of users faced with the need to reflash Lenovo phones are aware that in addition to the option of using a cable connected to a computer, and special programs, there is also the possibility of working with the so-called Recovery Mode- specialized software environment with more low level compared to the Android operating system.
This software environment allows the user to easily install various updates, clean data and carry out a number of other procedures on his phone. However, many users may have noticed that working with the standard "recovery" is quite difficult, and therefore, to conduct more comfortable work with this program, there is such an add-on as TWRP recovery, which supports a touch interface and contains everything that may be needed in the process of servicing the phone.
How do I make the firmware?
First of all, you should make sure that you have Superuser (root) rights on your smartphone. If you have them, feel free to download the TWRP recovery distribution kit, but at the same time you need to download the version that suits your model.
Now download and install the Mobileuncle program MTK Tools... Run this utility and download through it desired file recovery from the card using the menu “ Updaterecovery», And then reboot the phone.
This completes the installation of the updated menu. To enter a new menu, you need to simultaneously hold down the " Nutrition"And buttons" Loudness"(One of two or two at once, depending on the model). After the Lenovo logo appears on the screen, you can disable these buttons.
Key features of the new TWRP recovery
- the ability to install various mods for firmware;
- carrying out a complete flashing of the device;
- creating a backup file for a smartphone;
- restoration of any operable firmware from the backup file;
- complete cleaning of the system from unnecessary information.
If we talk about the main advantages of this mod in comparison with the standard "recovery", then we can highlight, first of all, the presence of a convenient touch interface, with which you will not need to manipulate standard buttons. Also, the program has a very clear menu and the ability to archive and install zip-archives.
How to use this program?
In order to flash your device, go to the menu " Install". After that, it will open in front of you file manager, in which you can go to both the memory card and see internal memory, which will contain all the files and folders you use.
To install the update, you will need to select the appropriate ZIP file, then click on it and activate the installation of the archived update. To do this, in the section " SwipetoConfirmFlash»You need to slide your finger from left to right.
Firmware via computer
If you do not want to install unnecessary utilities on the device or change the Recovery Mode, then in this case there is an option for flashing through a computer.
Before starting the procedure, the first thing you need to do is to discharge the device by more than 70%, that is, less than 30% of the total charge should remain. You will also need to be able to connect a smartphone to a computer using USB cable.
First of all, download and install drivers for your specific model... It should be noted right away that you need drivers specifically for the firmware, and not the standard drivers required to work with a PC in standard mode.
Now download the firmware for your smartphone, which is intended for use in the Flash Tool. In this case, you can choose both custom and official firmware depending on your personal preferences. Unpack the archive to the root of any disk, but the name of the folder with the firmware must contain only Latin characters, just like in the entire path to this folder. Basically, the Flash Tool itself is present in the archive with official firmware, but if you are using a custom one, then you will need to download the Flash Tool separately.
Next, you need to disconnect all USB cables from the device and remove the battery. You can start installing the drivers, for which you need to unpack them into a separate folder and open the "Device Manager". When the smartphone is turned off, connect it to the computer using a USB cable, then look in the open Device Manager and pay attention to whether an unidentified device was found. If so, right-click on it and select " Update driver", After which manually point the item to the folder in which the unpacked drivers are located. Wait for the update installation procedure, and then immediately disconnect the device from your computer.
After the drivers are installed, you can start flashing your phone using the Flash Tool. In this case, the phone should not yet be connected to the computer and should be in the off state without a battery. Run the file " Flash_Tool.exe", Which is present in the folder you unpacked or together with the firmware (in a folder named" Upgrade Tool ". If downloaded separately, look for the file in the downloads.
In the program, press the "" button, after which a special browse window opens, where you will need to find a file called "MT6577_Android_scatter_emmc.txt" (in your case, a different processor number may be present). This file is in the archive with the firmware. If you receive a message with the text "Incorrect Scatter file", then you will first need to make sure that there are no Cyrillic characters in the name of the folder with the firmware. As a last resort, just try to download and install a different version of the program.
Check the box next to “ DA DL ALL WITH Checksum". This checkbox must be checked in order to avoid all kinds of risks in the process of flashing your smartphone.
Then go to the item " Firmware"And press the button" Upgrade". Before that, you need to make sure that the appropriate checkboxes are checked in front of each section of the Flash Tool. If there is no flag in front of some section, then in this case, look at its name, double-click and in the browse window that appears, select the file of the format “ .img“, Having the appropriate name.
Ultimately, the procedure for checking the integrity of the firmware images will be launched, that is, the verification lines will start running in the Flash Tool window. Wait until the verification procedure is over and the program will be in standby mode again, after which it will be possible to connect a smartphone to start flashing. If the verification of images has not started, then you can connect the device immediately. It is worth paying special attention to the fact that the firmware should be performed only in the off state, but with the battery inserted.
If all procedures were carried out correctly, then the firmware should be activated upon connection. When the process is over, a window with a green circle will appear, which will indicate the end of the firmware of your device.
Now you can disconnect the device from the computer and start it up.
Lenovo a536 is one of the most worthy mobile phones out there and needs regular updates as well. For this, they traditionally use special firmware presented by experienced developers and modified by advanced users of mobile technology.
Features of the firmware on lenovo a536
Modern firmware lenovo a536 should please high level functionality and maximum security. At the same time, numerous variations of additional software designed specifically for mobile phones are available.
Each Lenovo A536 user can find exactly the program that fully suits his needs. Another important aspect is the ability to make sure that the application is pleasing to the maximum level of benefit.
Firmware installation options
To update the Lenovo a536 smartphone, it is possible to use a computer and recovery system on a mobile phone. Regardless of which option is chosen, it is extremely important to understand what the correct firmware update is.
FlashTool
To update the smartphone, it is possible to use FlashTool programs... This requires the correct installed drivers mobile phone.
- At the very beginning, you need to select the appropriate version of the firmware, which should be downloaded and unpacked.
- Without fail, the battery is pulled out of the smartphone.
- Off mobile phone connected to a computer. An unidentified device will appear in the manager for a couple of minutes. You need to click on it to update the driver, and then activate the firmware mode. If done correctly, Mediatek Preloader will appear.
- The next step is to check the box next to DA DL ALL WITH Cheksum. Otherwise, the mobile phone will not be able to turn on after the update.
- To update, click on DOWNLOAD while downloading the files.
- The smartphone must be connected to a personal computer.
- If everything is done correctly, multi-colored stripes will run at first. In this case, the successful completion of the process will be confirmed by a green check mark.
Lenovo a536 firmware ensures your mobile phone is updated quickly and successfully.
TWRP
In this case, an easy and fast process of updating a mobile phone is provided:
- Initially, the smartphone should be turned off.
- In this case, it is recommended to hold down the volume up and volume down buttons.
- At the same time, the power button is pressed and the brand logo appears.
- The main goal is to enter recovery mode then you can release both volume buttons.
- Now you should press wipe and select the first 3 items.
- Install is required to update the smartphone.
- The mobile phone restarts.
The second method pleases with surprising speed and ease, if regular updates are provided.
Benefits of updating Lenovo A536
In each case, the lenovo a536 firmware allows you to successfully update your mobile phone, so that its performance and functionality will meet all user expectations. Correct procedure ensures successful smartphone use.
(No ratings yet)
Lenovo s820 firmware highlights Lenovo a319 firmware different ways Lenovo k30 w firmware: methods Lenovo S60a firmware: instruction Firmware for lenovo s890: video review
Few users are quite popular smartphones Lenovo are guessing about the potential of their devices in terms of software replacement. Let's talk about one of the common models - budget decision Lenovo A536, or rather, how to flash the device.
Regardless of the purpose for which operations with the device's memory are performed, it is important to understand the potential danger of the procedure, although working with the device in question is quite simple and almost all processes are characterized by reversibility. It is only important to follow the instructions and do some preparation before seriously tampering with the memory sections.
In this case, the user bears responsibility for the consequences of manipulating the phone! All the actions described below are performed by the owner of the device at their own peril and risk!
If the user Lenovo A536 is puzzled by the possibility of serious interference in software part device, it is highly recommended to complete all preparatory procedures. This will allow you to restore the smartphone's performance in critical cases and the manifestation of various failures, as well as save a lot of time if you need to return the device to its original state.
Step 1: Installing the Drivers
A completely standard procedure before working with almost any Android device is to add to operating system A PC used for manipulation, drivers that will allow the correct pairing of the device and programs designed to write information to memory sections. Lenovo A536 is a smartphone based on Mediatek processor, which means that an application can be used to install software into it, and this, in turn, requires a specialized driver in the system.
The installation process for the required components is described in detail in the article:
If you have any difficulties with finding drivers for the Lenovo A536 model, you can use the link to download the necessary packages:
Step 2: Getting Root Rights
When the purpose of manipulating the software part of the A536 is the usual update of the official software or the return of the smartphone to the “out of the box” state, you can skip this step and proceed to one of the methods of installing Lenovo factory firmware into the device.
If there is a desire to try to customize the device software, as well as add some functions to the phone that are not provided by the manufacturer, obtaining root rights is a necessity. In addition, Superuser rights for Lenovo A536 will be required to create a full-fledged backup, which is highly recommended before further intervention in the software part.
The smartphone in question is easily rooted using the application. In order to obtain Superuser rights on the A536, you should use the instructions from the article:
Step 3: Create a system backup, backup NVRAM
As in many other cases, before writing the software into memory when working with Lenovo A536, you will need to clean the partitions from the information contained in them, which means that in order to restore it, it will subsequently become necessary to have backup or a full backup of the system. Manipulations that allow you to save information from the memory sections of an Android device are described in the article:
In general, the instructions in this lesson are sufficient to ensure the safety of the information. As for the Lenovo A536, it is highly advisable to create a backup of the partition before installing the Android "NVRAM".
The fact is that the erasure of this section in the model under consideration is a fairly frequent situation leading to inoperability. wireless networks... Restoring without a backup can take a lot of time and require deep knowledge in the field of working with the memory of MTK devices.
Let's dwell on the process of creating a copy of the section "NVRAM" in more detail.
Firmware for official software versions
Although software, created by Lenovo programmers and intended by the manufacturer for use on the A536, does not differ in anything outstanding, in general, the factory firmware satisfies the needs of many users. In addition, the installation of the official software is the only effective method of recovery in case of any problems with the software part of the device.
There are three main ways to update / reinstall official versions Android for Lenovo A536. The choice of the method is carried out depending on the state of the software part of the device and the goals set.
Method 1: Lenovo Smart Assistant
If the purpose of manipulating the A536 smartphone is the usual update of the official software, probably the simplest method is to use the proprietary Lenovo MOTO Smart Assistant utility.
Method 2: Native recovery
Lenovo A536 Factory Recovery Environment can install official system updates and full firmwares. In general, this may be somewhat easier than using the above-described Smart Assistant, because the method does not even require a PC for its implementation.
Method 3: SP Flash Tool
As with many other smartphones, the Lenovo A536 firmware using the app is the most cardinal and in a universal way system software records, rollback to previous version and updates, and, importantly, recovering MTK devices after software failures and other problems.
Custom firmware
The above methods of installing software in a Lenovo A536 smartphone assume that as a result of their execution, various official versions of Android will be obtained.
In reality, expanding the functionality of the device and seriously updating the OS version in this way will not work. A major change in the software part requires customization, i.e., the installation of modified unofficial solutions.
By installing custom, you can get newest versions Android, as well as install additional software components not available in official versions.
Due to the popularity of the device, a large number of custom solutions have been created for the A536 and various solutions ported from other devices based on Android 4.4, 5, 6 and even the newest Android 7 Nougat.
It should be noted that not all modified firmware are suitable for daily use, due to some "dampness" and various flaws. It is for these reasons that this article will not cover custom Android base 7.
But among the unofficial firmware based on Android 4.4, 5.0 and 6.0, there are very interesting options that can be recommended for use on the device in question as used on an ongoing basis.
Let's go in order. According to user reviews, modified solutions demonstrate the highest level of stability and ample opportunities on Lenovo A536 MIUI 7(Android 4.4), firmware Lollipop(Android 5.0), CyanogenMod 13(Android 6.0).
Moving from Android 4.4 to version 6.0 without overwriting IMEI is impossible, so you should go step by step. It is assumed that before performing the manipulations according to the instructions below, the official software version S186 is installed on the device and root rights are obtained.
Once again, we focus attention! You should not proceed to the implementation of the following without first creating a backup of the system in any way possible!
Step 1: Modified recovery and MIUI 7
Installation of modified software is carried out using custom recovery. For the A536, ported environments from different teams, in principle, you can choose any you like.
- Install custom recovery via the Rashr Android application. You can download the program in the Play Store:
- After starting Rashr, we grant the application Superuser rights, select the item "Recovery from the catalog" and show the program the path to the image with the modified recovery environment.
- We confirm the choice by clicking the button "Yes" in the request window, after which the installation of the environment will begin, and upon its completion a window will appear prompting you to reboot into the modified recovery.
- Before rebooting, you need to copy the zip file with the firmware to the microSD root installed in the device. This example uses MIUI 7 solution for Lenovo A536 from the miui.su team. You can download the latest stable or weekly custom versions from the link:
- We reboot into the modified recovery in the same way as in the factory recovery environment, or from Rashr.
- We make wipes, that is, clearing all sections of the device's memory. In PhilzTouch recovery, for this you need to select the item Wipe and Format Options then item "Clean to Install a New ROM"... Confirmation of the start of the cleaning procedure is the selection of the item "Yes - Wipe user & system data".
- After the wipes, we return to main screen recovery and select the item Install Zip, and then "Choose zip from storage / sdcard1"... And we indicate the path to the file with the firmware.
- After confirmation (item "Yes - Install ...") the process of installing the modified software will start.
- It remains to watch the progress bar and wait for the installation to finish. At the end of the process, the following message will be displayed. "Press any key to continue"... We carry out the indication of the system, i.e., by pressing the display, we return to the main PhilzTouch screen.
- Reboot into the updated Android is carried out by selecting the item "Reboot System Now".
- After a long wait for the system to boot (about 10 minutes), we have MIUI 7 with all its advantages!
Step 2: Installing Lollipop 5.0
The next step in the Lenovo A536 firmware is the installation of a custom called Lollipop 5.0. It should be noted that in addition to installing the firmware itself, you will need to install a patch that fixes some shortcomings of the original solution.
Step 3: CyanogenMod 13
The freshest Android version Recommended for use on the A536 is 6.0 Marshmallow. The custom firmware based on this version is based on the updated kernel 3.10+, which provides a number of undeniable advantages. Despite the large number of solutions, we will use the proven port from the CyanogenMod team.
To upgrade to a new kernel, you must first install Lollipop 5.0 in the previous way!
Step 4: Google Apps
Almost all modified solutions for Lenovo A536, including the three options described above, do not contain applications from Google. This somewhat limits the functionality of the device, which is familiar to many, but the situation can be resolved by installing the OpenGapps package.
Thus, all the possibilities of manipulating the software part of the Lenovo A536 smartphone are considered above. In case of any problems, don't be upset. Restoring a device with a backup is not difficult. In critical situations, we simply use method number 3 of this article and restore factory firmware via SP Flash Tool.
