ATTENTION! If your receiver does not find channels, then the setup instructions
The current (latest) version of the software from 07/06/2016
ATTENTION!
Never turn off the TV's power before the update procedure is complete! Otherwise, it may fail!
It will be impossible to return the previous version of the software!
Software update via satellite
To update the software via satellite, the TV must be connected to a tuned satellite dish.
PROCEDURE:
To start the update, turn on the Telemaster service.
Attention! If the service is not displayed in the general channel list, you need to search for channels again. After a few seconds, a message will appear about the need to update the module software (the appearance of the messages given in the instructions may differ from the messages displayed by your receiving device):
When this message appears, confirm the start of the update.
If you refuse to update, you will be prompted to re-execute it after restarting the receiving equipment. You can install new software at any time convenient for you.
After confirming the start of the update, messages will be displayed on the screen informing about the update process:
After the update is completed, the module will automatically restart. If this does not happen, you can reboot the module manually by turning off the receiving equipment from the power supply and turning it on again. Alternatively, you can remove the module from the CI + slot and reinstall it.
class = "eliadunit">
First, we reset the TV to factory settings. Menu> support> self-diagnosis> reset> ok. After rebooting, go to menu> channel> antenna> select the value "satellite". (pictures by the way with a preview-on-click increase)
We remove the jackdaws from all the satellites that are installed by default (if this fails, you need to remove the CAM module from the slot and reset the TV again), scroll through and select the EutelsatW4 36E satellite, select the transponder in the LNB settings 12226 , lower gene. LNB - 0, top - 10750.
Then go to "manual settings", look for a transponder 12226, turn on "network search" and click "search".
Then you can sort the channels at your discretion (it is better and more convenient to do this using the Samsung Channel List Editor)
If the satellite There is no EutelsatW4 36E in the settings, we do this:
We select "User sat 1".
Create your own satellite (put a bird in front of it) and save.
We go into the LNB settings, set everything as in the screenshot.
We do not put anything in the "transponder" section, we will add them manually.
The section "transponders" will be empty, select "create".
We need transponder frequencies, flow rate and polarization type for each channel packet. I will list:
Attention!!!
- The flow rate in all cases will be 27500, except for the frequency of 12190 L for it - 20,000.
- Not all transponders have polarization type (L), for 12054 (R)
Now we create all these transponders (continue).
We drive in the frequency (with numbers directly from the remote control), the transmission speed (also from the remote control) and select the type of polarization (L or R). We press "save".
The name of the network "Tricolor" appears, press "search" and "OK".
The channel package for this transponder has been scanned and saved in the TV's memory. Then everything is repeated for each subsequent transponder. In the same place, in the "manual setting" menu, we press "scan" in the "transponder" section, create the next one with our data, and so on. All previous scored and scanned transponders with settings and channels are saved.
As a result, we get 238 (together with radio) Tricolor channels.
Cam module setup and connection
Tricolor TV
Currently, some modern TV sets are equipped with an integrated satellite tuner and a connector for a Cam-module, which allows you to view TV channels of satellite operators. To view the channels of the satellite operator Tricolor TV, it is better that your TV set supports the standards of broadcasting HD AVC (MPEG-4 H.264), which will allow your company to view broadcasts in both the highest quality HD and SD formats.
To connect the Tricolor TV Cam-module to a TV set, you need to purchase the following equipment:
1. Instructions of what is actually how to set up satellite Set up satellite TV on Tricolor TV's. How to set up satellite influence on channels on lg tv. Cam-module Tricolor TV;
4.5. Smart card (comes with Cam module and one year subscription);
3. Satellite dish;
4. Don't know how to set up Smart TV on Samsung TV »How to set up Smart TV. Radial polarization converter;
5. Correct setting of Tricolor on TVs Samsung Tricolor on how to set up, module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV to as on the screen (10750. How to reset the settings on the Samsung Galaxy S8 and S8. RG-6 cable (or analog) to connect the satellite dish to the telecom.
Next, you need to install and configure the satellite dish for the broadcasting programs of the satellite operator Tricolor TV (Eutelsat W4 / W7 36.0`E) and use a TV cable and F-connectors to connect it to the plug of your TV set marked "SATTELITE".
Tune
There is an option for a satellite dish without the help of others, but for high-quality broadcasting, it is better to turn to specialists.
Next work on setting
Cam-module Tricolor
We produce TV specifically with a telecom:
1. Insert the smart card into the Cam-module in full (according to the annotations on the sticker);
Module
CI on TV
Samsung
Process customization satellite channels Tricolor TV on TV set Ultra HD brands Samsung... online store:.
Read also
How to uninstall Smart TV applications LG, Samsung Smart TV development is designed to use different integrated, as well as the user installation of the necessary applications, as well as access to the web for the TV. Smart TV provides a ton of features you need and about ...
How to delete Instagram page if you have forgotten your password: by mail, phone and computer Deleting Instagram if you have forgotten your password is a problem caused by various reasons. The person decides to delete the page for lack of necessary ...
Computer does not see the network Several times I have come across an issue in the comments which said that when setting up a local network through a Wi-Fi router, there were problems when a computer running Windows 7 could not see a computer in Windows XP. There de ...
An extraordinary true story, the average Netflix movie. Ballet release date Yeh. Friday on Netflix Written and directed by Sonia Taraporevala Julian Sands, Jim Sarb, Yeh Ballet cast Manish Chauhan as Nishu in Yeh Ballet At the end of 20 ...
How to install canon lbp 1120 printer on 10 x64 OSDownload Canon LBP 1120 x32 (x64) driver. Irkzus' IT Ability Blog. repair of equipment, setting up websites, SEO You can't find official drivers on OS x64, it was easier for us at the workplace and ...
It was reported months ago that older iPhones with low-capacity batteries were slowing down. Apple eventually confirmed that it slows down older iPhones that have naturally degraded batteries. The company adopted a lot of cotton for this ...
Why you can't do auto-tuning Tricolor channels
TV on Samsung TV
Manual customization TV Samsung to satellite Tricolor TV. How to set up WiFi (Wi-Fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an lg TV. We set it up in such a way that it would be federal.
2. Insert the module into the TV connector;
We carry out the first two points with the TV turned off from the power
3. How to set up Smart TV on Samsung TV, LG, Philips, Sony, Saturn. Internet connection of Samsung TV using network cable, WiFi connection, WPS systems, Plug & Access. Using the remote control, you need to reset the TV settings to factory defaults. For this
push the button
... "Menu" and select :. "support". "Self-diagnosis". "Reset", press the "OK" button, after which the TV will restart;
4. How to tune a Samsung TV to receive channels. How to tune the sound to set up digital channels on lg TVs. digital channels. After the end of the reboot
push the button
5. In the "channel" menu, go down to the "satellite system" submenu and click "OK";
6. A window will appear asking for a PIN code, where we enter the values. 0000 (default), a list of satellites will appear, where you need to remove all the checkboxes opposite the list of satellites, except for the satellite with the designation. Eutelsat W4 / W7 36E (if it is not possible to remove the checkboxes of the marked satellites: we take out the module from the TV and reset the TV settings again);
7. How to enlarge the Asus Eee PC? Replace its native 512MB RAM module with 1GB. Go to the "satellite selection" menu and select a satellite. Eutelsat W4 / W7 36E.
Read also
Headphones from a mobile phone are found in each of us. Usually, such an ordinary, but so necessary device migrates between jeans pockets, a jacket and a bag, therefore it quickly burns out and asks for a change. Do not rush to take it to the p ...
Designing the best gaming monitor for $ 150? Your gaming experience will largely depend on the monitor you choose. Along with the right pair of speakers, you need to enjoy incredibly addictive gameplay if you have a good mo ...
How do I enter the boot menu on my laptop and computer? Want to boot your computer from a USB drive or disk? There is no need to enter BIOS settings for this purpose. Especially if you don't understand much here. Ultimately, of course, more ...
model Precautions when charging the phone It's not easy to find out GT-S5560 Solutions and advice How long should the phone or tablet run on battery power. The battery's operating time depends on several. Unfortunately, we could not find a single cut ...
Tricolor TV is a company offering high quality television broadcasting. However, configuring the hardware to work properly can be difficult. The market for digital technologies is very large, and each manufacturer brings something different in both the receiver models and the TVs themselves. Most devices are configured automatically, while others require a more "personal" approach. LG TVs belong to the second group.
Why LG setup is different
In 2017, many companies changed their broadcasting conditions - channel delimitation was introduced, which they now decided to sort by lists. This affected the users in such a way that the list of offered Tricolor TV channels simply did not appear in the system, or did not appear in order / incomplete. LG TVs were particularly prone to this problem, whose software proved unable to maintain the new order.
Difficulties arose mainly in those cases when users tried to search for channels using the "Quick Search" option. At the same time, LG TVs perceived signal decoding algorithms incorrectly, for which the company has repeatedly apologized. Almost all product lines of the company for 2014-2018 were "amazed", and some still demonstrate the presence of this problem.
LG is actively developing new software that would support the formation of such lists that Tricolor TV uses. Its launch is tentatively scheduled for July 2018. However, this does not mean at all that Tricolor TV subscribers who have LG TVs at home should refrain from watching TV programs, since there is a way to get around the problem on their own - and it lies in a slightly different sequence of settings.
In addition, most LG TVs were equipped with a CAM module, which replaces a standard receiver - the connection and setup are somewhat different from the usual algorithm.
How to set up channels
Important! All of the following works on webOS TVs.
Installation of equipment should be carried out in accordance with the instructions of "Tricolor TV" - mounting the antenna and dish, laying the cables. The company offers its customers a complete set of necessary devices to correctly "dock" with the satellite and pick up the signal.
One of the main stages is the installation of the CI + Cam-module. In this case, the TV must remain off. It should be turned on after correct installation. In this case, the screen should display information about the equipment - about the card and the module itself.
Important! In some cases, at this stage, error No. 17 may occur, which indicates that the equipment was connected incorrectly, or the subscriber forgot to register with Tricolor TV with the card data.
After all these preparations, the channels are set up like this (manually):
- You need to go to the menu, where you should find the item "Advanced settings".
- Select "Channels".
- Select "Search for channels and settings".
- You should choose the "Autosearch" option, despite the fact that you configure everything manually. Here you can enter unique settings for the Tricolor.
- Search mode should be set to "Satellite". If not, select it from the list.
- Choosing a satellite TV operator is also an important option. For Tricolor today you need to click on "Other operators".
- Exit autosearch - click on the cross, or press EXIT on the remote control. If you have a 3 or 3.5 version of the LG axis and a Magic remote, press the Back / Exit button while holding.
After that, you can start manual channel search.
- Re-enter the "Channel Search and Settings" through the advanced options menu.
- Press Manual Search, and make sure the Receive Mode is set to Satellite. If not, change it to this mode.
- Open the "Transponder" settings item and select ANY one from the list, avoiding the number 12226 / L / 27500.
- Then press "Transponder" again.
- Now select option 12226 / L / 27500, and check if the Add button appears on the side.
- Turn on "Search network" - click on this item and change the value to "On."
- Click the Add option you found earlier. Wait for the end of the search and press EXIT.
Important! In some versions of the software, instead of “Add”, “Update” will appear.
After that, the search for channels in the network will begin - during the search, the LG TV will check 22 transponders, and the result of such a check should be more than 300 channels, including radio and service arrays.
The list of channels will be formed in a special way due to the fact that the new software has not yet been released for Tricolor TV. It will contain:
- Present digital and satellite services and radio channels;
- the order of the channels is messed up.
However, the list editor will be available, and you can easily select and mark those that the TV will have to skip in the future. The Skip function will help you hide them from the general list for easier navigation.
class = "eliadunit">
If your TV supports CAM modules, then you can watch paid satellite TV on it, such as Tricolor TV, NTV Plus, TELEKARTA, Rainbow TV, etc. You just need to buy a smart card of the operator you need , a module for this card, and insert the card with the module into the CI slot of the TV.
When choosing such a TV, the main thing is not to confuse it with DVB-T2, even if you tell the seller that you want a TV with a built-in receiver, he can sell you instead of DVB-S2, DVB-T2, and these are completely different things. Usually, by the name of the model, you can read what kind of receiver is installed in the TV. For example, for “LG” in the model name “47LM580S-ZA” the letter “S” indicates that the TV has a built-in DVB-S / S2 receiver.
The surest way to determine if your TV has a satellite receiver is to look back where all the connectors are located and find the “LNB IN” antenna input.
All these TVs have a "CI" slot for "CAM" modules. The "CAM" module is selected depending on the encoding in which the content is encoded, for example, if it is "Tricolor TV", then the "DRECrypt" module is needed, and preferably the latest version. There are no problems with the module, it can be easily purchased in a special store.
Brief instructions for configuring the CAM module "Tricolor TV" or "NTV PLUS" on LG TVs.
1. Install the Tricolor TV smart card into the Tricolor TV conditional access module (CAM WEST CI +). Chip to the thick side of the module.
2. Install the conditional access module in the switched off TV.
3. We turn on the TV and look at the information about the module and the access card, if there is no information or error code 17, check the installation is correct and register the equipment on the Tricolor website.
4. In the TV menu, in the settings, select the type of antenna " satellite". In the settings of the Tricolor satellite dish converter, specify the satellite Eutelsat 36А / 36В... Converter type single... Converter power supply (LNB) - on. LNB 10750... Transponder frequency - 12226 MHz or 12111 MHz or 11881 MHz (default settings) bit rate 27500. Let's look at the signal quality.
5. Go to channel setting and include automatic search(in new generation TVs) transponder frequencies from 11881 to 12418 will be registered automatically. At the same time, it is desirable that the TV be flashed with the latest software version, in this case the Tricolor TV CI + CAM module will work more correctly, all transponders will be relevant, and you will correctly scan the necessary channels.
6. If everything went well and the channels were found, go to the sound settings on the TV and set it in the " Digital TV Sound Settings" parameter MPEG... This is done so that the sound on the channels does not disappear when watching. Go to the module settings CI data (CAM) orCI Parameters> Settings and select the item " Factory reset". Turn off the TV completely.
9. An important feature of LG TVs is the “Automatic channel update". It must be turned off, otherwise the TV will periodically reset the channel list you have configured.Go to settings "Channel auto-update "and set the parameter:off.Now you can fully enjoy your TV's capabilities while watching HD channels. Enjoy your viewing and vivid emotions!
NOTE:
Problems with sound or incorrect switching of Tricolor TV channels on the CAM module were eliminated in the update on the CAM module in December 2014.
For self-updating of the CAM module on the TV, find in the list of channels of the operator Tricolor TV the service channel for updating the software - " Telemaster ".He usually goes under the number333 according to the operator's list. If it is not in the list, scan the channels again.
After you switch to it, you can update the CAM of the Tricolor TV module through the TV menu CI data (CAM) or CI Settings> Settings> Software Download> OK... If new software is available and you are prompted to update, click OK on the remote control, after that, the percentages of the software update will go. It is necessary to wait until the module software is fully loaded from the satellite and upon completion of the update, reset the module to factory settings: CI data (CAM) orCI Settings> Settings> Factory Reset> OK
After the update, everything works correctly, no glitches are observed, all channels are always in place and with sound. CHECKED!
Also on the menu CI data (CAM) orCI Settings> Information> Smart Card> Providers> Tricolor TV you can see information about packages and their expiration dates.
Explanation of subscription classes:
Also on the menu CI data (CAM) orCI Parameters> Information> Smart Card> General Information you can find out ID numberTricolor TV smart cards for extension and connection of various TV channel packages.
If, after changing the frequencies by the Tricolor TV operator, the channels on your TV are not scanned, or the number of channels after scanning is less than 100, we do the following: (Thanks to the user Dim)
The problem was the same as everyone's. 70 channels, scattered numbering, etc. etc.
CAM-Module software - up-to-date, TV software (for example LG MT24) - latest version. Nothing has changed after the software update.
We reset the TV to factory settings. In the settings of the satellite dish and channels, set the Satellite for Tricolor and NTV + - "Eutelsat 36b" or "Express-AMU1" or "Express-AT1" in the position 36 ° E.
In the settings, you can also create a new satellite yourself with the necessary parameters:
Converter type: Single / Single
LNB Power (ON / ON)
It is enough to add one Transponder / Frequency Tricolor TV: 12111MHz or 11881MHz Horizontal 27500
The most important thing is to choose from the list of transponders one of the Tricolor TV 12111MHz or 11881MHz transponders. Plyarization-H (Horizontal) Stream rate 27500.
Then we select Manual search, select the home transponder for the Tricolor (12111 or 11881) and be sure to tick the Network Search / NIT checkbox. We press to update and wait for some time. All channels must be registered in normal numbering. All the best.
