Firmware dns 4003. Getting Root DNS S4003. What is root

DNS S4003 2SIM runs under the operating system Android 4.1. Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root access to the DNS

Root on DNS S4003 2SIM

How to get a root for DNS S4003 2SIM see instructions below.

Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

(needs a PC)
(Root using PC)
(popular)
(root in one click)

If the rights of the superuser (root) could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Characteristics

Standard: GSM 900/1800/1900, 3G
Type: smartphone
Operating system: Android 4.1
Case type: classic
Body material: plastic
Number of SIM cards: 2
Multi-SIM Operation Mode: Alternate
Dimensions (WxHxD): 63x118.5x10.7mm
Screen type: color TFT, 16.78 million colors, touch
Touch screen type: multi-touch, capacitive
Diagonal: 4 inches.
Image size: 480x800
Number of pixels per inch (PPI): 233
Type of ringtones: polyphonic, MP3 ringtones
Vibrating alert: yes
Camera: 5 million pixels, built-in flash
Camera Features: Autofocus
Video recording: yes
Audio: MP3, FM radio
Dictaphone: yes
Headphone Jack: 3.5mm
Interfaces: USB, Wi-Fi, Bluetooth
Satellite navigation: GPS
Internet access: WAP, GPRS, EDGE, email POP/SMTP, HTML
Processor: Qualcomm MSM8225Q, 1200 MHz
Number of processor cores: 4
Video processor: Adreno 203
Built-in memory: 4 GB
RAM: 1 GB
Memory card support: microSD (TransFlash), up to 32 GB
Additional SMS features: text entry with dictionary
MMS: yes
Battery capacity: 3000 mAh
Talk time: 6.5h
Standby time: 250 h
Sensors: light, gyroscope
Book search: yes
Exchange between SIM-card and internal memory: yes
Organizer: alarm clock, calculator, task planner

Firmware for DNS S4003 2SIM

Android 4.1 official firmware [stock ROM file] -
Custom Firmware DNS -

Firmware DNS S4003 2SIM can be done in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official DNS site, unfortunately, will not help to solve this problem, and we will solve it for free. This DNS model has a Qualcomm MSM8225Q, 1200 MHz on board, respectively, there are such flashing methods:

Recovery - flashing directly on the device
A special utility from the manufacturer, or

We recommend the first method.

What are custom firmware (firmware)?

CM - CyanogenMod
lineageOS
paranoid android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
flymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and disadvantages of a smartphone from DNS and how to fix them?

If the S4003 2SIM does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks at all (possibly after charging).
If it freezes when updating / freezes when turned on (requires flashing, 100%)
Not charging (usually, hardware problems)
Can't see sim card
The camera does not work (for the most part, hardware problems)
Sensor not working (depending on the situation)

For all these problems, please contact (you just need to create a topic), specialists will help for free.

Hard Reset for DNS S4003 2SIM

Instructions on how to make a Hard Reset on DNS S4003 2SIM (reset settings). We recommend that you familiarize yourself with the visual guide, which is called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-> go to Recovery
"wipe data/factory reset"
"yes - delete all user data" -> "Reboot System"

How to enter Recovery?

hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
a menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on DNS S4003 2SIM can be done in a very simple way:

Settings->Backup & Reset
Reset settings (at the very bottom)

How to reset pattern

How to reset the unlock pattern if you forgot it and now you cannot unlock your DNS smartphone. On the S4003 2SIM model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Most owners of trendy smartphones phone or DNS smartphone model s s4003 on the Android 4.1 operating system with a color TFT screen, 16.78 million colors - 800x480 dpi believe that it is impossible to change the firmware in these gadgets on their own, but they are deeply mistaken.

The reasons why you need to flash a phone, a DNS smartphone model s s4003 on the Android 4.1 operating system with a color TFT screen, 16.78 million colors - 800x480 dpi, are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after unsuccessful installation or just wanted to install the latest firmware version.

Firmware Flashing DNS smartphones s5301q, s5004, s4505 and other models.

- Flashing on your own can be carried out on all phones of the phone, smartphone DNS model s s4003 on the Android 4.1 operating system with a color TFT screen, 16.78 million colors - 800x480 dpi.

In addition to the topic of firmware on smartphones for android, there is a review article:. It tells in detail, there is a video instruction on how to reflash a mobile device on Android kit kat.

In what cases it is necessary to update the firmware of smartphones of a phone, a smartphone DNS model s s4003 on the Android 4.1 operating system with a color TFT screen, 16.78 million colors - 800x480 dpi and for other models:

If the phone does not turn on, although the reason may not be in the firmware;

If the phone is constantly buggy and reboots;

If an unsuccessful firmware is made and the phone must be returned to its original state;

If you want to install the next, most up-to-date firmware version;

Download firmwares, programs, firmware and DNS firmware.

Download free firmware for DNS phone from a computer.

- official website of DNS cell phone manufacturer, for the following models s5004, s4505, s4005 and others. By clicking on the link, you can enter the model name and code in the search and download software and firmware, for example, for DNS s5004, s4505, s4005, you can also download RU, RP, software and driver to your mobile device for free.

The search for software, first of all, should always be carried out on the official website of the electronics manufacturer, there are always the most relevant and fresh firmwares for the DNS s4506 phone with a color TFT screen, 16.78 million dpi colors and other models with other characteristics.

Instructions for firmware DNS.

How to flash a smartphone. Instructions for firmware using the example of a DNS phone s4507, s4506.

In the smartphone, go to Settings-> For Developers and turn on USB debugging.

We connect the USB cable from the phone to the computer and install the firmwares.

Disconnect the phone from the computer, turn it off and remove the battery.

We launch the SP Flash Tool program on the computer, it is needed to upload new firmware to the phone.

In the program window, press the Scatter-loading button and in the window that opens, select the MT6589_Android_scatter_emmc.txt file (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for updating.

Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).

Now click the Download button. We answer "Yes" to any pop-up messages.

We connect the smartphone (using a USB cable) to the computer, the new firmware will start uploading to our device automatically.

At the end of the process, a window with a green circle will appear. You can disconnect your phone from the PC and turn it on.

For more information on how to do this, you can watch the video instructions:

To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out the phone model and its firmware version by dialing the code in the phone *#0000# .

Instructions for flashing DNS s4507, s4506

One more example. Instructions for firmware mobile phone DNS s4507, s4506.

Firmware for DNS phone s4507, s4506: download firmware for

Firmware DNS s4507, s4506

1. To update the firmware on DNS s4507, s4506, you need to download the firmware from the link above, the Smart Phone Flash Tool downloader and USB firmware.

2. Turn on the phone, connect the USB cable and install the firmware.

3. After installing the firmware, turn off the machine.

4. Run the program loader "Flash tool.exe".

5. Click “Download Agent” and select the file “MTK AllInOne DA.bin” (in the folder with the downloader).

6. Click “Scatter-loading” and select the file “MT6573 Android scatter.txt” (in the firmware folder).

7. Uncheck "PRELOADER", click on "Download" and connect the USB cable.

8. After downloading the firmware, the bootloader will show the status of the software installation.

Note: When you connect the phone, the program should see it and start the firmware. If the phone is not detected, then disconnect it from the computer, remove and insert the battery and reconnect it to the computer

Instructions for flashing DNS from the mobile version of the site.

And one more example of firmware for a DNS smartphone s4507, s4506. Other phone models are flashed in the same way. The main thing is to find the right firmware for your phone model. You can find them on the Internet through Yandex. I can also recommend a good site with firmware

So, the DNS firmware s4507, s4506 is taken as an example.

The first thing to do is download the firmware itself. It is presented as a zip file. You do not need to unpack it, as there is a reset to an external storage medium, that is, an SD card.

The next thing to do is turn off your phone and fully charge its battery. After the battery is fully charged, you need to remove the charger and pull out the battery, and after about 30-40 seconds, place it back into the phone.

Next, press the power button and hold it for 1-2 seconds while holding down the key, which decreases the volume. These two buttons must be held until the manufacturer's logo appears on the phone screen - DNS s4507, s4506. After that, you need to release the on / off key, but the volume down must be held until the Android logo appears. After it appears, release the volume button and press up once, that is, increase the volume. We use the same button when moving through the menu items, and select the desired option with the power key. Select the menu item “apply update from external storage”, then select the archive that was saved to the external storage medium.

This firmware DNS s4507, s4506 is completed. As you can see, there is nothing difficult in the process of installing an operating system on a phone and it is really possible to do it yourself, without resorting to paid services of service centers or self-taught "handicraftsmen".

But it should be noted that in case of incorrect actions when flashing the phone, it can be irrevocably spoiled, turned into a "brick" - a useless and good-for-nothing piece of plastic and iron. Therefore, if you are not confident in your abilities, then it is better to entrust the flashing of a mobile phone or tablet to experienced programmers from the electronics repair service.

It is best to download firmware for modern DNS models from the official website of the phone manufacturer, you can do this by clicking on the link: download

In order to download proprietary software, use the link: firmwares official website. There is a description here on how to find a driver for your phone.

From the link posted above in the text, you can download and read the description for free on how to make a firmware for an android phone DNS s4507, s4506 and other models. This page contains a video review and instructions on how to reflash a smartphone on your own, there is a firmware for the phone for free, through the official website.

How to independently flash an android phone on a DNS s4507 phone model on the Android 4.1 OS platform on a screen with a resolution of 960x540, a color IPS type, touchscreen, a program on a computer , s4507, s4506, s5005, s5301q, s5004, s4505, s4005, s4508, s4505m, s4503, s4504, s4502, s4501, s5301, s4701, e77, m972g, p102g, e101, m83g, m104g, airtab m84g, p71g, m974w, m971w, s4001, 4502, s4002, s4702, s3501, p83, e74, m83w, e76, e102, e75, m74, m101g, 10.1 airtab m101w for free through the official website.

Popular DNS Reviews

	It is possible to download pictures for free on such types of DNS phones as simple and touch, for different operating systems, registration is not required.
	You can learn more about how to Download DNS music for free here, for this, follow the link above.
	The social network vk.com is the most visited network in our country. Initially, you could only use the network on a computer, 10 years ago there were no touch screen phones, much less DNS tablets.
	Where to download and how to install the application for free - Rules of the Road with questions and answers and with explanations on DNS

Not enough functionality on your purchased Android smartphone DNS S4003 ? Do you want to root this smartphone? Site and article Getting Root DNS S4003 will help you!

What is root?

For those who have just become a beginner or are not an expert in the vast world of Android and are not particularly familiar with the concept of how - root android, and also why it is needed, what can be done after obtaining Root rights or how to get rid of them later if they are no longer needed, all this can be found in the detailed article -!

Primarily!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Prerequisites and conditions, the second part is Instruction how to get root rights using the received files and programs. If, in the process of obtaining root rights, Android constantly reboots or in the process of eternal loading (it happens extremely rarely, but still), then it's worth it. Now let's start getting Root rights!

Android manufacturers sometimes release new firmware on which it is not possible to get Root using one of the suggested methods, if there are other alternative methods in the article, try them. Doesn't work anyway? Specify the Android version and firmware version in the comments (do not write malicious shitty comments, you will not put this on yourself or others). Android freezes (does not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!

Do you have any questions?

Still have questions or can't get root access to your Android? Leave comments about what worked for you, what didn't work, or what you did differently.

Necessary tools and conditions

For Method #1

Computer or laptop (OS Windows);
Intact MicroUSB cable;
Download and install the driver;
Charge smartphone DNS S4003 must be not less than 30%;
Enable USB debugging on your smartphone;
Download the program for obtaining Root rights - vroot.

For Method #2

Charged smartphone DNS S4003‎, at least 50% battery;
Enable the ability to install applications not from Google Play "";
Download the latest app framroot and install on your smartphone.

Instructions for obtaining Root DNS S4003

Method number 1

1. Connect your smartphone to PC

2. Run the program to get Root rights vroot

3. Wait until the program detects your smartphone DNS S4003

4. Press the green button "Root"

7. After a couple of minutes, Root rights are received

8 To provide an application root, pop-up window right click

9. If you don't like Chinese characters, then you should consider replacing the app kingroot on the supersu ES file manager application

Method number 2

Installing the Framaroot App

1. Reset the Framaroot application to your smartphone and install it. If such a window appears, allow and continue

2. Find the Framaroot icon in the menu and launch the application

Getting Root with Framaroot

3. Select supersu from the prepositional choice (SuperSU and SuperUser are applications administrators of Root rights)

4. Select and click on any prepositional character - Gandalf,Boromir, Sam, Frodo, Legolas, Aragorn(one of these characters will give you Root rights)