Motorola Moto X Force is an American smartphone that runs on Android 5.1 and has 5 points out of 5. Here you can download firmware, find out the characteristics, how to reset the settings and get root rights. This smartphone is high performance.
Root on Motorola Moto X Force 64Gb
How to get a root for Motorola Moto X Force 64Gb see instructions below.
Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon
- (needs a PC)
- (Root using PC)
- (popular)
- (root in one click)
If the rights of the superuser (root) could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.
Characteristics
- Battery capacity: 3760 mAh
- Talk time: 48h
- Function wireless charging: eat
- Features: Thickness: 7.6mm - 9.2mm
- Type: smartphone
- Weight: 169g
- Control: on-screen buttons
- Construction: waterproof
- Operating system: Android 5.1
- Case type: classic
- Number of SIM cards: 1
- Dimensions (WxHxD): 78x149.8x9.2mm
- SIM card type: nano SIM
- Screen type: color AMOLED, touch
- Touch screen type: multi-touch, capacitive
- Diagonal: 5.4 inches.
- Image size: 2560x1440
- Number of pixels per inch (PPI): 544
- Automatic screen rotation: yes
- Aperture: F/2
- Camera: 21 megapixels, LED flash (front and rear)
- Camera Features: Auto Focus
- Video recording: yes
- Max. video resolution: 3840x2160
- Front camera: yes, 5 million pixels.
- Audio: MP3
- Headphone Jack: 3.5mm
- Max. video frame rate: 30 fps
- Interfaces: Wi-Fi 802.11ac, Bluetooth 4.1, IRDA, USB, NFC
- Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. 6
- Satellite navigation: GPS
- A-GPS system: yes
- Support for LTE bands: band 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 25, 28, 40
- Processor: Qualcomm Snapdragon 810, 2000 MHz
- Number of processor cores: 8
- Built-in memory: 64 GB
- RAM: 3 GB
- Video processor: Adreno 430
- Memory card slot: yes, up to 2048 GB
- Control: voice dialing, voice control
- Sensors: light, proximity, gyroscope
- Speakerphone (built-in speaker): yes
- Flight mode: yes
»
Firmwares for Motorola Moto X Force 64Gb
Official android firmware 5.1 [stock ROM file] -
Motorola custom firmware -
Firmware Motorola Moto X Force 64Gb can be done in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official website of Motorola, unfortunately, will not help to solve this problem, and we will solve it for free. This Motorola model has a Qualcomm Snapdragon 810, 2000 MHz on board, respectively, there are such flashing methods:
- Recovery - flashing directly on the device
- A special utility from the manufacturer, or
What are custom firmware (firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from Motorola and how to fix them?
- If Moto X Force does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification light only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Hard Reset for Motorola Moto X Force 64Gb
Instructions how to do hard reset on Motorola Moto X Force 64Gb (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. . 
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-> go to Recovery
- "wipe data/factory reset"
- "yes - delete all user data" -> "Reboot System"
How to enter Recovery?
- hold and hold Vol (-) [volume down], or Vol (+) [volume up] and the power button (Power)
- a menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on Motorola Moto X Force 64Gb can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset graphic key if you forgot it and now you can't unlock your Motorola smartphone. On the Moto X Force 64Gb model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
At the end of 2015, the American market was replenished with the flagship model Droid Turbo 2. It was designed to reincarnate the once top Motorola brand. Traditionally for the States, the device was tied to the Verizon operator. However, the new boss in the face of Lenovo went further and introduced Moto X Force - a smartphone for all markets. What is the highlight of this decision, we will now understand.
Appearance and equipment Motorola Moto X Force
The manufacturer, contrary to popular belief, does not position its offspring as a secure device. The only thing is that at the factory the smartphone is treated with a special liquid that makes the case waterproof. Thus, compliance with the IP52 standard is declared, which allows it to be wetted, but not immersed in water. At the same time, Moto X Force is equipped with a Moto ShatterShield display, which theoretically does not beat under any conditions. Lenovo gives it a 4-year warranty. As shown by crash tests, the screen really withstands several drops on a concrete surface, however, the case bends, but the smartphone itself continues to work.
The latter here has a metal frame and is made of aluminum. That is why the weight of the device does not exceed 169 g, with dimensions:
- Width - 78 mm;
- Height - 149.8 mm;
- Thickness - 9.20 mm.
The SIM card tray is located unusually - next to the 3.5 mm jack on the bottom of the case. Moreover, there is only one SIM here, but it is adjacent to the slot for a memory card. Back cover non-removable and is one piece with the battery. By the way, it is made of "ballistic nylon", which a priori cannot be shuffled. But there are problems with the front panel. The fact is that she likes to accumulate dust on top and bottom of the decorative insert at the conversational speaker. Not spared and speakerphone with microphone. Are you talking about moisture resistance? Oh well. As for the “combat color”, here you can choose one single color - black. However, before us is a male device with all the consequences.
The device package includes:
- Smartphone.
- Charger TurboPower.
- USB cable.
- A clip to remove the SIM card tray.
- Headset (wired).
- Manual.
Motorola Moto X Force screen
Let's start with TTX:
- The maximum level of rage at the level of 330 cd / m2;
- Color gamut (sRGB) more than one hundred percent;
- Delta E - 1.6;
- Gamma is 2.3;
- Color temperature - 6800K.
Viewing angles are good, but the screen is hopeless in the sun and mercilessly glare. There is a feeling that you look deep into and somewhere at the bottom of the system interface. In fairness, it should be noted that the effect is not noticeable indoors, but over time you start to look closely.
Motorola Moto X Force - firmware overview
Initially, the smartphone was delivered "out of the box" with pre-installed Android 5.1, but migrated to Russia already with the sixth edition of the OS. And this is not naked firmware, not miserable attempts to create something of your own, and then forget to update, but a balanced operating system, slightly finished by developers, but not deprived of its chips. So, a proprietary option has been implemented that displays all the necessary information on the locked screen. The device is sensitive to movement and light changes to show the current time or a notification of arrival at the destination at the right time. Interestingly, this has little effect on autonomy.
- desired for the owners of "clean" Android 6.0 reset button;
- contextual computing;
- additional processors that control sensors and cameras while the smartphone is sleeping;
- branded option Active Display.
Inside the Motorola Moto X Force
The device runs under the control of the very “barbecue” in the face of the Snapdragon 810, which received four ARM Cortex-A57 cores with a clock frequency of 2.0 GHz and four ARM Cortex-A53 cores, 1.5 GHz. On paper, everything is fine, but in practice, in multitasking mode, the device starts to overheat, and the frequencies sag. In fairness, we note that the case of the Moto X Force, even when overloaded, cannot be called hot, which aluminum and the thickness of the case help to a certain extent. However, in fact we get a Snapdragon 652 with good optimization for games, since the Adreno 430 GPU and 3 GB LPDDR4 RAM are also present.
The Motorola Moto X Force 64gb version may be enough for the average user if you don't need to store a lot of files. At the same time, internal memory can be expanded up to 2 TB using microSD cards for the price of an airplane. True, it's hard to believe. In any case, the card will think for a long time, but the same 256 GB are swallowed by the gadget without difficulty. If you neglect the memory expansion, then in the case of, for example, Motorola Moto X Force 32gb, you will get 21 gigabytes of usable space with a penny. The rest will be occupied by the operating system and software. However, no one canceled root-rights. By the way, the device supports OTS connection, even the mouse works, which is a little, but surprising.
Motorola Moto X Force test
It is impossible to call the model weak, although it does not take first place in synthetic tests, after all, it is 2017 in the yard. But it can compete with HiSilicon Kirin 935, MediaTek MT6795 and Exynos 7420. So, in AnTuTu, the device scores 85652 “parrots”. Browser and graphics tests are also average. There were no problems with playing Full-HD video. At the same time, the smartphone heated up a little higher and to the left of the center of the case, that is, where the processor is located. The maximum temperature was 48 degrees, the minimum - 24 degrees. This is tolerable, given the fact that under load, the average gadget heats up to 35 degrees.
In any case, you will have to come to terms with the thought - you are buying a device for the "here and now", as new SoCs enter the arena, and games, albeit slowly but surely, are approaching their desktop counterparts. 2017 for Moto X Force will pass without loss, but the next one is still in doubt. Thus, touched on the future - no.
Connectivity and Communications Motorola Moto X Force
The smartphone is optimized for Russian networks, can work in 2G GSM and 3G WCDMA, as well as LTE Cat6 FDD and TDD, that is, it theoretically accelerates to 300 Mbps. There are no questions about the quality of signal reception. The device feels confident, both indoors and with a weak signal somewhere in the backyard. Thus, the following frequencies are supported:
- LTE FDD: Band 1-5-28; TDD Band 40;
- WCDMA: 850-2100 MHz;
- GSM: 850-1900 MHz.
- Bluetooth 4.1 with loopback;
- NFC module;
- two ranges of Wi-Fi;
- a similar number of MIMO antennas.
Regular dialer is different from the system and supports a quick search Smart Dial. The keyboard is also non-standard, but comfortable, there is continuous input. It is a pity that the developer did not provide for scaling the interface.
Motorola Moto X Force Cameras
The smartphone is equipped with:
- 21-megapixel Sony IMX230 main camera with f/2.0 aperture and LED flash.
- 5MP front camera with f/2.0 aperture and LED flash.
Photography is at the proper level, but for obvious reasons, its quality does not reach modern top-end smartphones. The camcorder supports 4K, there is a slow mode, that is, slow motion. There is no optical stabilization as such, but the video is recorded smoothly when moving. Particularly pleased with the sharpness. There are those who scold the camera, but here, as they say, the taste and color. If you've tried out the optics of the iPhone 7, then of course the Moto X Force isn't the best option. Whatever it was, the detail is good.
The front camera for selfies is not the best option, unless Skype loves it, and the traffic will be saved, but a flash is implemented, which helps out a lot in certain situations.
Motorola Moto X Force sound
Before the release of the device, there were rumors about five speakers. Expectations were not justified. The device received one music speaker and two microphones, including those with noise reduction. The sound is loud and clear, with a small amount of medium and low frequencies. At the maximum, the sound begins to choke, and the speaker wheezes. Although the manufacturer does not position its offspring as an external audio speaker. It is enough for a ringtone, and the voice recorder catches even distant conversations and records cleanly.
But in headphones, the picture changes radically, not without the help of a high-quality Snapdragon 810 audio path and a 10-band equalizer with presets. Thus, the solution is second only to devices with a separate DAC, it is enough for a music lover, but not enough for an audiophile.
Motorola Moto X Force battery life specs
The autonomy of the device pleases, despite the fact that a powerful processor and a large AMOLED screen are installed here, which are provided by a 3760 mAh battery. The charge without problems is enough for a couple of days of work in mixed mode.
- Video from a memory card for 13 hours;
- Games up to five hours;
- Reading - 7 hours.
Advantages and disadvantages of Motorola Moto X Force
Motorola fans were waiting for the Moto X Force to become cheaper, but the miracle did not happen, but it should have happened, because interesting analogues have long entered the market, which can do more and are cheaper. Be that as it may, the device still remains a device for fans of the brand, designed to surprise others, they say, Motorola is still hoo and what if the Chinese bought it. At the same time, not only the price is sad, but also the camera, the lack of which could be corrected programmatically, which for some reason the developers did not do.
Device advantages:
- Indestructible screen.
- Balanced iron.
- Large memory support.
- Thoughtful firmware.
- Capacious battery.
- Really fast charging.
- 21 megapixel camera.
- No tempered glass.
- Terrible camera app.
- Large bezels around the screen.
- Hot Snapdragon 810.
- Price.
Motorola Moto X Force: price and video review
The model can really surprise, one multilayer screen is worth something. Yes, and the device looks brutal and memorable. His place is on the torpedo of a jeep or next to a vertical gun, although there are no special protective qualities except for the screen. In other words, we have an unusual smartphone for those who want to stand out and think least of all about the filling, although calling it a budget one does not turn the tongue.
The price of Motorola Moto X Force in Russia is 40,000–50,000 rubles, depending on the volume of the drive. Check out the video review and crash test of the device below:
standard codes - 1234 or 0000 unlock Motors 19x: up to version 1.71 - code 19980722, for the version above and for C200, C205 - code 20010903
Removing code C350
1. *#06#
2. Press the Menu button then 048263 * (press the buttons quickly in 2 seconds)
3. An input field will appear
4. Enter 18*0 (Master Reset)
5. Enter 18*1 (Master Clear)
codes for unlocking cell phones.
master code for Motorola T205/T190/T191
master code - 19980722 ok
(T190, T191, T205) master code
P2K test menu:
*#06#, menu, menu, 048263*
test commands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flexible version
Hard reset MPx200 - blue button + power on
Codes for Motorola:
View IMEI *#06# >
Activate 100 phone numbers ppp087p1p > OK
Clock activation ppp123p1p >
Activation of the engineering menu ppp000p1p > ppp113p1p > OK (reboot)
Set signal for incoming messages ppp276p1p >
It is possible to send SMS from the address book, for this you need to press ppp272p1p>
To be able to manually switch the frequency ranges 900, 1800, 900/1800 you need: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p >
To activate the music editing menu, you need: ppp278p1p>
TEST MODE - new To enter the Test Mode, you need to hold the " # " key in the main menu for 3-4 seconds
In order to use some functions in the test mode menu, you must enter a cell and " # "
01# - Exit Test Mode
19# - shows the software version
57# - resets all phone settings to factory settings
MOTOROLLA T2288
View IMEI *#06# >
Activate 100 phone numbers ppp087p1p > OK
Clock activation ppp123p1p > OK does not work in all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p > ppp113p1p > OK (reboot)
Set signal for incoming messages ppp276p1p >
It is possible to send SMS from the address book, for this you need to press ppp272p1p>
To be able to manually switch the frequency ranges 900, 1800, 900/1800 you need: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p >
To activate the music editing menu, you need: ppp278p1p>
new To activate the alarm you need to dial works only with new firmware
new To enable the "Games" item in the menu, you need to type it works only with the new firmware
new To enable the Bricks game, you need to type it works only with the new firmware
new To enable the Tower of Hanoi game, you need to dial it only works with the new firmware
new To enable the Baccarat game, you need to type it works only with the new firmware
new To enable the Calculator, you need to type it works only with the new firmware
Service menu in Motorola C350 (suitable for many other "C versions")
Teams:
0*0*0 Select tone 0
0*0*1 Select tone 1
0*0*2 Select tone 2
0*0*3 Select tone 3
0*0*4 Select tone 4
0*0*5 Select tone 5
0*0*6 Select tone 6
0*0*7 Select tone 7
0*0*8 Select tone 8
0*0*9 Select tone 9
0*0*124 Select tone 1KHz
0*0*125 Select tone 2 kHz
0*0*126 Select tone 3 kHz
0*0*127 Select tone 4 kHz
0*1*X
3*0*1 Enable vibrator
3*0*0 Disable vibrator
4*3*1 Enable speech encoder full rate Audio loopback
4*3*0 Disable speech coder full rate
4*4*1 Enable speech coder enhanced full rate
January 36, 23, 2003 6809456A82
Troubleshooting C350 Series
4*4*0 Disable speech coder enhanced full rate
4*5*1 Enable speech coder half rate
4*5*0 Disable speech coder half rate
5*0*0 Set audio level 0 Audio level
5*0*1 Set audio level 1
5*0*2 Set audio level 2
5*0*3 Set audio level 3
5*0*4 Set audio level 4
5*0*5 Set audio level 5
5*0*6 Set audio level 6
5*0*7 Set audio level 7
5*0*8 Set audio level 8
5*0*9 Set audio level 9
5*0*10 Set audio level 10
5*0*11 Set audio level 11
5*0*12 Set audio level 12
5*0*13 Set audio level 13
5*0*14 Set audio level 14
5*0*15 Set audio level 15
6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10*0*3 Set band GSM 900
10*0*4 Set band DCS 1800
10*0*5 Set band PCS 1900
10*0*6 Set dual band GSM 900 / 1800
10*1*0 Read band 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 Initialize non-volatile memory (Master Reset)
18*1 Initialize Non-volatile memory (Master Clear)
20*X*0 Load Channel number X Select Channel (Used for debugging Rx mode)
20*1*0 Load channel number 1 GSM Low channel
20*62*0 Load channel number 62 GSM Mid channel
20*124*0 Load channel number 124 GSM High channel
20*512*0 Load channel number 512 DCS Low channel
20*700*0 Load channel number 700 DCS Mid channel
20*885*0 Load channel number 885 CDS High channel
20*512*0 Load channel number 512 PCS Low channel
20*661*0 Load channel number 661 PCS Mid channel
20*810*0 Load channel number 810 PCS High channel
55*2*001 Test Display. All pixels ON
55*2*000 Test Display. All pixels OFF
55*2*002 Test Display. Checkerboard pattern A
55*2*003 Test Display. Checkerboard pattern B
55*2*004 Test Display. Border pixels ON
*#06# IMEI Check No Test Mode Required
For dessert:
NETMONITOR turns on: Menu 00**83786633*
off: MENU 00**8378633*
you have to press very fast. turn off the handset, and it appears every time you turn it on. Exit to the menu / back: menu-left soft button
Caller photo instead of standard pictures
Published: WR , Listed: Feb-01-2004
Caller photo
For a long time, I puzzled over how to put his photo on the caller. My corefan got everything, saying that on his Siemens M55 this is easily done without much strain (what a bastard). And then the thought came to my mind: “What if I upload a picture with the same name that is in the icons to the phone, which can be assigned to the caller?” I immediately got into the menu of the telephone directory to look at the names of these standard icons, because I thought that the name of the icon should not differ from the name of the file in which it is stored. Seeing all the names in Russian, I was disappointed and thought that I would have to sit with a translator for a long time, choosing the right name for each. First of all, I tried to upload a picture called boss.gif to my phone. And oh yes!!! Happened!!! Instead of some suit and tie, my picture proudly showed off on the screen. I was about to pick up English file names, but it dawned on me. What am I doing? Everything is already on the phone! You just need to switch to English. Everything worked out, instead of standard icons, I uploaded pictures of my friends and my girlfriend. Size of standard icons 32*32, maximum size pictures that I uploaded to the phone 65 * 65. I haven’t tried it again and don’t advise it, even less is better, since the large picture covers the name of the caller.
List of files that can be replaced with photos of friends.
Robot - robot.gif
UFO - ufo.gif
Abomination - stinky.gif
Family - family.gif
Star - superstar.gif
Brainy - brainy.gif
Skin - baldy.gif
Fan - fan.gif
Buddy - buddy.gif
Charm - delicius.gif
Thing - cute.gif
baby - kid.gif
Terrible - yucky.gif
Sweetie - sweetie.gif
Boss - boss.gif
Charm - delicious.gif
Own melody when you turn on off the phone.
In order to play your own melody when you turn on or off the phone, you need to fill in your ringtones with the name ~*****File034.mid ~*****File029.mid respectively. I do not recommend uploading a melody longer than 10 seconds.
A picture when you turn on the phone instead of the inscription "Searching for a network."
Upload any picture or animation called "custwakeup" to your phone. Then we launch the MSS 3.2.3 program. Select the Other functions tab, check the box next to "Activate Wakeup graphics" and click "Activate selected features". Then we reboot the phone by clicking on "Restart the phone".
Tested on TeleTac250, Profile300e
So: how to break the password (for example, you turn on someone else's phone, and it highlights Loc "d and default password"123" is not suitable):
Turn on the phone
-We see Loc "d
-press (FNC)-00**83786633-(STO)-# (enter the service mode) - as a result, you should see US "-press 55# - these are user parameter settings -press several times * until you see 7 flashing in turn and 000000, zeros are the system code that must be entered when changing the password "legally"
- press again * and see 8 flashing in turn (we don’t need it) and a three-digit number - the password that we need - now you can turn off the phone, and when you turn it on, dial the same three-digit code !!!
A general reset of the phone may be needed, for example, when selling the phone:
Turn on the phone
- press (FNC) -00**83786633-(STO) -# (enter the service mode) - as a result, you should see US"
-press 32# (you need to wait until it beeps or reboots),
- all timers, all phone books are reset, all settings are returned to the default state;
your carrier settings will definitely remain (the phone will reset for about a minute)...
codes for motorola (I don’t remember whose article ... thanks to aftor
To enter the service menu, quickly press the combination of the following buttons: Menu048263*
A command prompt should appear on the screen: Opcode:___________
Then you can enter commands, for example 54*18*1 - full reset phone.
Rollback (return to the previous state) is simple - let's say you want to return the operator's logo, type Opcode and field 1,2,3,4 are the same as there, and field 5 (d) as in the Rollback line. Everything.
Teams:
Microphone/speaker test (loopback):
4*5*1
Reading the phone code:
32*116*1*0*0
Reading the security code:
32*118*1*0*0
(the code pops up in the format 0030003000300030...
every 4th digit is the desired one, that is, in this case it is four 0)
Transmitter check:
10*0*6 - range selection 900/1800
20*N*0 - N-channel selection
45*M - select M-power level
7*0*1 - turn on TX, send zeros
7 * 1 * 1 - the inclusion of the TX, the transfer of units.
Master Reset 18*0
Master Clear 18*1
Remove operator
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "016" "OK"
Rollback: Field 5 (D) "000" "OK"
results
F1:0
And also this:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "75" "OK"
Field 4 "1" "OK"
Field 5 (D) "255" "OK"
Rollback: Field 5 (D) "191" "OK"
results
F1:0
Remove date
Condition:
Availability of connected GPRS service
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
results
F1:0
Everything, as soon as the GPRS icon appears on the screen, the date will disappear.
Remove line icon
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "31" "OK"
Field 4 "1" "OK"
Field 5 (D) "231" "OK"
Rollback: Field 5 (D) "247" "OK"
results
F1:0
Engineering menu:
We enter the menu "Opcode"
048263*
We enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "68" "OK"
Field 4 "1" "OK"
Field 5 (D) "183" "OK"
-›Runback: Field 5 (D) "007" "OK"
results
F1:0
Appeared: Menu - › Office Tools - › Technology
Kypcop in the main menu in the middle:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "107" "OK"
Field 4 "1" "OK"
Field 5 (D) "176" "OK"
-›Back: Field 5 (D) "160" "OK"
results
F1:0
Activation of the "Brightness" menu:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "064" "OK"
-›Runback: Field 5 (D) "000" "OK"
results
F1:0
Appears: Menu-›Parameters-›Initial setting
Tones and vibration
0*0*0 Select tone 0
0*0*1 Select tone 1
0*0*2 Select tone 2
0*0*3 Select tone 3
0*0*4 Select tone 4
0*0*5 Select tone 5
0*0*6 Select tone 6
0*0*7 Select tone 7
0*0*8 Select tone 8
0*0*9 Select tone 9
0*0*124 Select tone 1 KHz
0*0*125 Select tone 2 KHz
0*0*126 Select tone 3 KHz
0*0*127 Select tone 4KHz
0*1*X Disable tone X
3*0*1 Turn on vibration
3*0*0 Disable vibration
Setting the quality of voice transmission and reception decoding
4*3*1 Enable full quality speech encoder (fr)
4*3*0 Disable full quality speech encoder (fr)
4*4*1 Enable full quality speech encoder (efr)
4*4*0 Disable full quality speech encoder (efr)
4*5*1 Enable half quality speech encoder (hr)
4*5*0 Disable half quality speech encoder (hr)
Setting the ringer and sound volume
5*0*0 Volume level 0
5*0*1 Volume level 1
5*0*2 Volume level 2
5*0*3 Volume level 3
5*0*4 Volume level 4
5*0*5 Volume level 5
5*0*6 Volume level 6
5*0*7 Volume level 7
5*0*8 Volume level 8
5*0*9 Volume level 9
5*0*10 Volume level 10
5*0*11 Volume level 11
5*0*12 Volume level 12
5*0*13 Volume level 13
5*0*14 Volume level 14
5 * 0 * 15 Volume level 15. It seems that this value is more than you can set yourself in the phone
6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute (xs what is this)
6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute (I don't know either)
Transmission setting - GSM, etc.
10*0*3 Set GSM frequency 900
10*0*4 Set frequency DCS 1800
10*0*5 Set PCS frequency 1900
10*0*6 Set dual frequency GSM 900 / 1800
10*1*0 Read frequency 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 Initialize non-reflashable memory (Master Reset - hard reset)
18*1 Initialize non-flashable memory (Master Clear)
20*X*0 Load channel number X Select channel (Used for debug Rx mode)
20*1*0 Load channel number 1 GSM Lower channel
20*62*0 Load channel number 62 GSM Middle channel
20*124*0 Load channel number 124 GSM Highest channel
20*512*0 Load channel number 512 DCS Lower channel
20*700*0 Load channel number 700 DCS Middle channel
20*885*0 Load channel number 885 CDS Highest channel
20*512*0 Load channel number 512 PCS bottom channel
20*661*0 Load channel number 661 PCS Middle channel
20*810*0 Load channel number 810 PCS Highest channel
Testing the display (for example, for the presence of dead pixels)
55*2*001 Enable all pixels
55*2*000 Turn off all pixels
55*2*002 Display test. Test Sample A
55*2*003 Display test. Test Sample B
55*2*004 Display test. Border pixels enabled
55*2*0xx (xx=05 to 14 or to 13). Test monitor in color modes
To launch the menu, quickly press the following buttons: Menu, 0, 4, 8, 2, 6, 3, * . The screen should display "Opcode:". This is the service menu. We will use two commands: 32 - read, 47 - write!
BE CAREFUL WHEN USING COMMAND 47. IF YOU ARE WRONG, YOU CAN CHANGE UNKNOWN WHAT SETTINGS OF THE PHONE, WHICH CAN LEAD TO ANY CONSEQUENCES!!!
AND FURTHER! In the service menu of the phone, all numbers must be entered in the decimal system. And the phone shows you everything in a hexadecimal number system (when using the read command).
It remains only to parse the example. Let's turn on the engineering menu of the phone.
All information will be submitted as follows:
Opcode 47 OK
Field 1 50 OK
Field 2 1 OK
Field 3 68 OK
Field 4 1 OK
Field 5 (D) 247 "OK"
Rollback: Field 5 (D) 135
results
F1:0
Now let's see what it all means:
After entering the engineering menu, enter 47 - the write command, click OK.
Let's deal with the Field fields:
"Field 1" is the number of the memory cell.
"Field 2" is the record number.
"Field 3" is the byte at which to start displaying the contents of the entry.
"Field 4" is the number of bytes to be displayed on the phone screen, starting from the one we specified in "Field 3".
"Field 5" is the actual value of the bit being searched for.
Otkat is the value of the "Field 5" field that must be entered to undo the changes.
"Results F1:0" - you will see if everything went without problems.
After introducing all this into the phone, we reboot it and see that a menu item has appeared in Office Tools - technology.
Similarly, we use command 32.
Updated (11/13/2004): How to find out the rollback value yourself.
To do this, use command 32.
Let's look at the example of enabling / disabling additional vibrating alerts:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
Field 5 (D) "252" "OK"
results
F1:0
You have the above text, however there is no rollback value in it. What to do?
We enter the same parameters into the phone, only with the read command:
Opcode "32" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
After the introduction, we get:
F1:0
F2(D) : 8c
(You may have a different value instead of 8s)
As I said, the phone displays all information in hexadecimal. We translate 8s into the decimal system: we get 140. This is the value for the rollback!
Note: in Windows it takes a regular calculator, make it an engineering one, put "Hex" - a 16-decimal system, type what we see on the display, press "Dec" - we get a number in the decimal system. Here are the codes to enable/disable some menu items and more:
Enable 2nd sim card:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "28" "OK"
Field 4 "1" "OK"
Field 5 (D) "169" "OK"
->Revert: Field 5 (D) "168" "OK"
results
F1:0
"Preferred card" will appear in Options -> Other settings -> Initial setting.
To turn off the operator logo, you need to make changes in 2 steps:
1 stage:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "016" "OK"
Rollback: Field 5 (D) "000" "OK"
results
F1:0
2 stage:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "75" "OK"
Field 4 "1" "OK"
Field 5 (D) "255" "OK"
Rollback: Field 5 (D) "191" "OK"
results
F1:0
Disable line icon:
Enter the "Opcode" menu
Menu -> 048263*
Enter values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "31" "OK"
Field 4 "1" "OK"
Field 5 (D) "231" "OK"
Rollback: Field 5 (D) "247" "OK"
results
F1:0
Date off: (condition: GPRS service enabled)
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Rollback: Field 5 (D) "000" "OK"
results
F1:0
Disabling the screen saver to enable:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "29" "OK"
Field 4 "1" "OK"
Field 5 (D) "112" "OK"
results
F1:0
Disabling the screensaver on shutdown:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "70" "OK"
Field 4 "1" "OK"
Field 5 (D) "223" "OK"
results
F1:0
>>If "Chat" menu is disabled Field 5 (D) "255" "OK"
Enable custom graphics:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "35" "OK"
Field 4 "1" "OK"
Field 5 (D) "001" "OK"
results
F1:0
Ha on: custwakeup.gif
Ha off: custgoodbye.gif
Turning off the melody to turn it on:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "34" "OK"
Field 4 "1" "OK"
Field 5 (D) "000" "OK"
results
F1:0
Turning off the melody on shutdown:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "36" "OK"
Field 4 "1" "OK"
Field 5 (D) "000" "OK"
results
F1:0
Activating the Brightness menu:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "064" "OK"
->Otkat: Field 5 (D) "000" "OK"
results
F1:0
A quick menu appears instead of the date:
Enter the menu "Opcode"
Menu -> 048263*
We enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "82" "OK"
Field 4 "1" "OK"
Field 5 (D) "163" "OK"
Rollback: Field 5 (D) "161" "OK"
results
F1:0
The date disappears and the "quick menu" appears
In standby mode, joystick deflection results in a hit:
->right: Browser
->left: Recent calls
->uppx: cmc
->down: Directory
To activate other hidden items, you need to do the same, only you need to use the following codes:
47*50*1*8*1*036 - incl. voice recorder
47*50*1*8*1*032 - off voice recorder
47*50*1*43*1*159 - incl. NETMONITOR (on: Menu 00**83786633* off: MENU 00**8378633*)
47*50*1*43*1*156 - off NETMONITOR
47*50*1*44*1*016 - incl. menu item "roaming" (may not work, write that there is no place)
47*50*1*44*1*000 - off menu item "roaming"
47*50*1*59*1*252 - new vibration alert modes will appear
47*50*1*62*1*169 - incl. weird empty menu item
47*50*1*62*1*137 - off. weird empty menu item
47*50*1*82*1*099 - incl. menu item "AIM" -" is a messaging system for corporations based on AIM like ICQ.
47*50*1*82*1*035 - off. menu item "AIM
47*50*1*84*1*119 - incl. menu item "Mobile QQ"
47*50*1*84*1*115 - off menu item "Mobile QQ" is an instant messaging utility similar to ICQ. True, to use it, you need to create account on the server and registration, as well as operator support
Service codes Motorola MPx200, MPx220, MPx100
*#**837# - Version info
*#**372# - FQC
*#**364# - Engineering menu
*#**266*0# - Set as data COM port
*#**266*1# - Set as log COM port
*#**797# - Time to failure timer & Power down code
*#**2263*0# - Set to default Band
*#**2263*1# - Disable GSM Band
*#**2263*2# - Disable DCS Band
*#**2263*3# - Disable EGSM and DCS Band
*#**2263*4# - Disable PCS Band
After entering, press the SEND button.
Service codes for Motorola E365
#02# - firmware version, hardware, etc.
#09# - phone test
Other codes work only in "test mode". It can be unlocked using the Compal Service Tool (what this program is and where to get it is written here) - go to Handset Specific. Click the Read Data button. We are waiting for the firmware version, FLEX, etc. to appear. Next, press the EFEM ON button. In the Message window that opens when the program starts, it should say:
Trying to Write Data to MS...
EFEM Set OK!
Read Handset Specific Data Begin.
All "test mode" is on.
#08# - "expert menu"
#03# - network - RF signal level monitor (to disable the code, enter it again)
#04# - battery - voltage level monitor at control points (to disable the code, enter it again)
**0108# - error counter management
**0101# - Test SIM auto answer
**0102# - reset all settings, melodies, address book, etc.
**0105# - exit "test mode"
**0106# - engineering menu
**0109# - reset TFT counter (value can be viewed by entering #02#)
Motorola C350 service codes
Service menu in Motorola C350
To enter the service menu, quickly press the combination of the following buttons:
Menu048263*
A command prompt should appear on the screen: Opcode:___________
Then you can enter commands, for example 54 * 18 * 1 - a complete reset of the phone. (54* - mandatory start for all teams)
Teams:
0*0*0 - Select tone 0
0*0*1 - Select tone 1
0*0*2 - Select tone 2
0*0*3 - Select tone 3
0*0*4 - Select tone 4
0*0*5 - Select tone 5
0*0*6 - Select tone 6
0*0*7 - Select tone 7
0*0*8 - Select tone 8
0*0*9 - Select tone 9
0*0*124 - Select tone 1 kHz
0*0*125 - Select tone 2 kHz
0*0*126 - Select tone 3 kHz
0*0*127 - Select tone 4 kHz
0*1*X - Disable tone X
3*0*1 - Enable vibrator
3*0*0 - Disable vibrator
4*3*1 - Enable speech encoder full rate Audio loopback
4*3*0 - Disable speech coder full rate
4*4*1 - Enable speech coder enhanced full rate
Troubleshooting C350 Series
4*4*0 - Disable speech coder enhanced full rate
4*5*1 - Enable speech coder half rate
4*5*0 - Disable speech coder half rate
5*0*0 - Set audio level 0 Audio level
5*0*1 - Set audio level 1
5*0*2 - Set audio level 2
5*0*3 - Set audio level 3
5*0*4 - Set audio level 4
5*0*5 - Set audio level 5
5*0*6 - Set audio level 6
5*0*7 - Set audio level 7
5*0*8 - Set audio level 8
5*0*9 - Set audio level 9
5*0*10 - Set audio level 10
5*0*11 - Set audio level 11
5*0*12 - Set audio level 12
5*0*13 - Set audio level 13
5*0*14 - Set audio level 14
5*0*15 - Set audio level 15
6*2*2*0*0 - Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6*4*6*0*0 - Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10*0*3 - Set band GSM 900
10*0*4 - Set band DCS 1800
10*0*5 - Set band PCS 1900
10*0*6 - Set dual band GSM 900 / 1800
10*1*0 - Read band 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 - Initialize non-volatile memory (Master Reset)
18*1 - Initialize Non-volatile memory (Master Clear)
20*X*0 - Load Channel number X Select Channel (Used for debugging Rx mode)
20*1*0 - Load channel number 1 GSM Low channel
20*62*0 - Load channel number 62 GSM Mid channel
20*124*0 - Load channel number 124 GSM High channel
20*512*0 - Load channel number 512 DCS Low channel
20*700*0 - Load channel number 700 DCS Mid channel
20*885*0 - Load channel number 885 CDS High channel
20*512*0 - Load channel number 512 PCS Low channel
20*661*0 - Load channel number 661 PCS Mid channel
20*810*0 - Load channel number 810 PCS High channel
55*2*001 - Test Display. All pixels ON
55*2*000 - Test Display. All pixels OFF
55*2*002 - Test Display. Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function/Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55*2*003 - Test Display. Checkerboard pattern B
55*2*004 - Test Display. Border pixels ON
*#06# - IMEI Check No Test Mode Required
ENABLE NETMONITOR: Menu 00**83786633*
POWER OFF NETMONITOR: MENU 00**8378633*
you have to press very fast. turn off the handset, and it appears every time you turn it on.
Exit to the menu / back: menu-left soft button
ANDROID CODES FOR Motorola Moto X Force
*#06# - show IMEI Motorola Moto X Force IMEI is a unique number mobile device, which is assigned to it at the time of release. This number can be used to track, for example, the location of a stolen phone or tablet. IMEI number, as a rule, consists of 15 digits, which are unique for each mobile device.
*#8888# - shows Hardware Version Motorola Moto X Force
*#9999# - show Motorola Moto X Force firmware version
*#8999*8376263 - Motorola Moto X Force firmware data
*#8999*324# - various technical data
*#8999*636# - Motorola Moto X Force specifications
*#8999*523# - display contrast, the same as through the main menu of the phone
*#0523# - contrast
*#2255# - Motorola Moto X Force call log
*#0837# - software version output
*#0001# - show serial number
#*7337# - Unlock Motorola Moto X Force
*#8999*377# - Motorola Moto X Force error log
*#4777*8665# - GPRS setting Motorola Moto X Force
*#0020# - setting the default menu language
*#0007# - sets the text mode to Russian
*#9125# - setting emoji modes in charging mode
*#7465625# - block list
*7465625*638*# - network blocking
*#9998*228# - battery status (capacity, voltage, temperature)
*#9998*246# - Motorola Moto X Force software status
*#9998*289# - change the frequency of the alarm signal
*#9998*324# - debug screen
*#9998*364# - Watchdog
*#9998*544# - Jig detect
*#9998*636# - Motorola Moto X Force memory status
*#9998*746# - SIM file size
*#9998*837# - Motorola Moto X Force software version
*#9998*842# - Motorola Moto X Force vibration test
*#9998*872# - Motorola Moto X Force diagnostics
*#8999*8378# or *#8999*test# -Test Mode
*#9998*999# - last check
*#9998*523# - contrast
*#9998*947# - reset in case of a critical error (entered without a SIM card, deletes all files, may cause camera failure)
*2767*3855# - full EEROM reset (SP-unlock, but can change the phone's IMEI)
*2767*2878# - custom EEPROM reset
*#0228# - find out battery temperature, type and charge of Motorola Moto X Force
*#9998*JAVA# - JAVA - CSD and GPRS settings for Internet Motorola Moto X Force
*#9998*VERNAME# - extended information about firmware, hardware, time and date of software creation, etc.
STANDARD GSM CODES FOR Motorola Moto X Force
Change PIN - **04*, then enter the old PIN and the new PIN twice.
Change PIN2 - **042*, then enter old PIN2 and new PIN2 twice.
Unblock SIM card (PIN) - **05*, then enter PUK and new PIN twice
Unblock SIM card (PIN2) - **052*, then enter PUK2 and new PIN2 twice
Motorola Moto X Force call forwarding (you must order the service from the operator)
Cancel all redirects - ##002#
Cancel all conditional redirects - ##004#
Activate all conditional forwarding - **004*Phone number#
Forward unconditional (forward all calls)
Turn off and deactivate - ##21#
Deactivate - #21#
Enable and activate - **21*Phone number#
Enable - *21#
Check status - *#21#
Forwarding in case of "no answer"
Turn off and deactivate - ##61#
Deactivate - #61#
Enable and activate - **61*Phone number#
Enable - *61#
Check status - *#61#
Set the ringing time before triggering "no answer" call forwarding
When setting call forwarding on "no answer", you can set the time in seconds that the system gives you to pick up the phone. If during this time you have not picked up the phone, incoming call will be redirected.
Example: - **61*+709576617601234**30# - sets the timeout to 30 seconds
Set timeout - **61*Phone number**N# , N=5..30 (seconds)
Delete previous installation - ##61#
Forwarding in case of "not available"
Turn off and deactivate - ##62#
Deactivate - #62#
Enable and activate - **62*Phone number#
Enable - *62#
Check status - *#62#
Forwarding in case of "busy"
Turn off and deactivate - ##67#
Deactivate - #67#
Enable and activate - **67*Phone number #
Enable - *67#
Check status - *#67#
Call barring (you must order the service from the operator)
Change password for all bans (default - 0000)
- **03*330*old password*new password*new password#
Activate - **33*password#
Deactivate - #33*password#
Check status - *#33#
Barring all calls on Motorola Moto X Force
Activate - **330*password#
Deactivate - #330*password#
Check status - *#330#
Barring all outgoing international calls on Motorola Moto X Force
Activate - **331*password#
Deactivate - #331*password#
Check status - *#331#
Barring all outgoing calls on Motorola Moto X Force
Activate - **333*password#
Deactivate - #333*password#
Check status - *#333#
Barring All Incoming Calls on Motorola Moto X Force
Activate - **353*password#
Deactivate - #353*password#
Check status - *#353#
Barring all incoming calls while roaming
Activate - **351*password#
Deactivate - #351*password#
Check status - *#351#
Motorola Moto X Force call waiting (you must order the service from the operator)
Activate - *43#
Deactivate - #43#
Check status - *#43#
Send your phone number (Anti Caller ID)
Deny - #30# phone number
Allow - *30# phone number
Check status - *#30#
Display the phone number of the caller to you (AON)
Deny - #77#
Allow - *77#
Check status - *#77#
Motorola Moto X Force secret codes questions
Ask a question about secret codes for Motorola Moto X Force
