Manufacturers are trying in various ways to make strong modern phones, but at the same time they remain fragile devices. Therefore, sticking a protective glass on a phone (smartphone) is popular today. This flexible and durable invention must be properly installed on your device.
With the help of such a protective glass, various scratches and other similar damages will not be terrible for smartphone owners. Even with loud drops of the phone, there is a high probability that it will remain intact with glass.
Only the phone on which really high-quality and original glass is installed will be protected.
When buying, follow these recommendations:
- Sold matte and glossy types of glass. Glossy products are more affordable, but they can only provide high-quality protection against impacts.
- The price of frosted glass is much higher. If the phone has glass, then even after bumps, glare and drops, its appearance will remain normal. The main disadvantage is the degraded color reproduction.
- Buy glass with an oleophobic coating - thanks to it, you can not be afraid of greasy spots on the surface of your smartphone.
- Give preference to products that come with napkins.
- The thickness and strength of glass are completely interrelated concepts, and therefore the level of protection in case of falls is greater, the thicker this element.
Let's take a look at how to install protective glass to a smartphone.
Sticking a protective glass on the phone - step by step instructions
Additional protective glass must be glued carefully. Use the following algorithm:
- Get it to workplace it was completely clean. Even the presence of dust is undesirable. Therefore, before doing work, wipe the table on which the smartphone and the component to be installed will lie.
- Next, you will have to wipe the glass itself. To do this, use a napkin and special remedy for cleansing. In general, you need to do everything to make it impossible for dust particles to get under the glass.
- By gluing the protective glass, the smartphone itself must remain turned off. Make sure that the screen does not turn on accidentally by pressing a button on the panel.
- Use a damp cloth designed for phones to wipe the screen. They are sold in many stores (in the household departments). If you can't find these wipes, buy one that's meant for glasses.
- Additionally, clean with a dry cloth as well. This will help to completely get rid of streaks and various prints.
- Next, take the protective glass and peel off the film from it. Do this from the side that will be in contact with the screen.
- In the next step try to position the glass. Do not touch the smartphone itself yet, it should lie on the table. Do not delay this process for a long time.
- After that, directly attach the item to the phone so that it covers the entire area of the phone. The glass should stick without much difficulty, especially if you are serious about cleaning the display.
The ingress of air under the glass is unacceptable. If it is in this gap, then try to remove it with a napkin, gently pressing it on the glass. The air must escape from the side of the glued element. After that, you can turn on your smartphone. Check if the sensor functions are working correctly.
Smartphone users often have a logical question about whether it is possible to stick the same glass a second time if it was badly pasted the first time. The problem may be related to the presence of air or dust particles. Try to carefully peel it off, then wipe the screen of the phone itself, repeat this action. In principle, if the surface becomes clean, the problem will be solved.
How to remove (peel off) the protective glass?
Glass is not as difficult to remove as film. In case of incorrect gluing, you can use the bookmark located on the outside of the glass.
If there was a serious fall, then to remove protective screen you have to be very careful. For this, a plastic card is used. Use it to slightly lift the edge of the glass and move the entire card under the surface of the protective screen, which should come off.
There is one simple tip if peeling off the protective glass does not work. To do this, heat the smartphone in the palms, after which you can try to do the procedure without improvised means.
How to stick a protective glass on the phone (video)
Smartphones are expensive and should be handled with care. One of the most vulnerable places is the screen. Many in the process of operation repeatedly drop the phone, carry it in a bag, where, in addition to it, there are keys and other sharp objects.
As a result, chips, scratches, cracks appear quite quickly even on a new smartphone, or even the screen may break. But it is quite possible to extend the life of the device if you use modern technologies, for example, purchase and install protective glass.
Outwardly, it looks like a film with similar tasks, glass is transparent and flexible in appearance, but due to its higher density it is more reliable and durable.
Protective screen for phone it costs a little more than a film, but it fully justifies its cost, since it reduces the probability of a screen breaking to almost zero.
What is a protective glass for a smartphone - what functions does it perform
Before you know how to glue protective glass on the screen of a smartphone Let's take a look at its features.
The benefits include:
- resistance to damage and scratches - you can check this with keys or a knife or scissors - there will be no marks left,
- shock absorption — even if the phone falls with the screen down, it will not break, only the protective glass will be damaged, the fragments from which will not scatter in different directions,
- holds securely - more durable than film, easy to stick at home without special experience.
Flaws:
- the phone will become more voluminous and heavy,
- buying and sticker glass will cost a decent amount,
- requires careful installation.
On average, the thickness of the protective glass is from 0.2 to 0.3 mm.
Glass has five layers:
- Oleophobic - provides the convenience of sliding fingers on the screen, while fingerprints are easy to wipe off with a cloth, protects against moisture,
- Protective - is responsible for the safety of the screen from scratches and cracks,
- Anti-Glare - Prevents screen fading
- Restraining - if the screen is still able to break, it will hold the fragments,
- Silicone.
VIDEO INSTRUCTION - GLUE PROTECTIVE GLASS ON SMARTPHONE
How to stick a protective glass on an iPhone - step by step instructions
Those who want to learn how to glue a protective glass on an iphone 7-6-5 should keep in mind that the general algorithm of actions is approximately the same for all phones.
The contents of the glass box may vary slightly by different manufacturers, but usually includes the glass itself, a microfiber cloth/cloth, an alcohol wipe, and an adhesive film to remove dust. If something is missing, you can use improvised means instead of napkins and rags.
It is important to prepare the workplace - it can be a table or other flat horizontal surface. Lighting should be sufficient so as not to miss stains and dust during gluing.
Instructions - how to glue a protective glass on iphone 7-8
You can glue it yourself without much difficulty according to the following algorithm:
- We disinfect our hands so that no dust and other contaminants remain on the phone and the film.
- We put a protective glass on the smartphone for trying on. If you are afraid to stick it crooked, some sets have special stickers (you can replace it with tape). We glue the stickers on one side, fixing the correct position of the glass.
- We throw away the glass.
- We wipe the smartphone screen with a damp cloth from the set, then wipe it dry with the second cloth from the set. We take an adhesive film from the set and apply it to the screen to remove the smallest dust particles.
- Remove the protective film from the backing.
- We apply / lower the glass to the screen so that all the cutouts match exactly.
- We smooth the protective glass from the center with a napkin and make sure that there are no air bubbles and dust.
- Check the sensitivity of the screen to the finger.
VIDEO
The whole process will take about 10 minutes. The developers have thought of everything to the smallest detail, so there should not be any difficulties with gluing.
Unique properties allow you to create maximum protection with maximum convenience for the owner of the popular iphone smartphone 7.
You can buy protection via the Internet and in specialized stores for accessories for Apple products, and stick it on your own without resorting to the help of professionals.
Few people succeed in gluing the glass perfectly the first time, as air bubbles remain under it. A dry cloth will help to remove them - press it on the screen and push the air out.
If dust gets under the glass, we bend it from the right side and remove the dust with adhesive tape, then again press the glass to the screen.
Now, knowing how to properly glue the protective glass on the iphone 7-6-5s, you can save money and protect your phone yourself without resorting to expensive professional services.
If you become a happy owner of iphone 7-8, take care of its protection from scratches and other damages from the case. It is very easy to do this - use Baseus Pet Soft 3D or Bronoskins protective glass.
Overview of the protective glass on the iphone 7 case
Protective glass for iphone 7 Baseus Pet Soft 3D 0.23 mm has a number of advantages compared to ordinary glass.
Advantages:
1.Soft edges.
The glass edge is made of a special PET material, so the glass edge will not crack or crumble. It is not only convenient, but also safe.
2.3D rounding.
While regular glass covers only the straight part of the display, Baseus Pet Soft glass completely covers the smartphone screen, covers all curved outer surfaces.
3.Hardness 9H.
With a minimum thickness of the protective glass, the strength remains very high, so it withstands impacts, preventing chips and scratches.
4.The thickness is only 0.23mm.
The glass is ultra-thin, but at the same time all its protective qualities are preserved. Your phone will be under strong and durable protection.
VIDEO DESCRIPTION
How much does a protective glass for phones cost
Today, hundreds of companies around the world are engaged in the production of protective glass.
The most budget options, of course, are offered by Chinese companies, whose products can be easily ordered through aliexpress.
However, the basis of the products of any manufacturer is tempered glass, only the degree of its hardening differs.
The price can vary significantly depending on the quality indicators, as well as the popularity of the manufacturer.
So, for iphone 6 you can buy anti-reflective glass DF iBlickGlass-03 with a transparent matte surface and a hardness of 9H. The cost for it starts from 1500 rubles.
As for more simple options, for example, Chinese-made, on average, the cost for them starts from 900 rubles. This is almost twice as high compared to films. Many people ask the question - is it worth overpaying?
Maybe stop at the film?
The film copes with the task of protecting against scratches, but when dropped, it cannot always protect the screen from cracks. It is more difficult to stick it, air bubbles often remain, dirt quickly clogs inside. Glass in this regard is more convenient, it will last longer and provide more reliable protection for the screen. However, these amenities come at a price.
If you are not going to glue the glass yourself, you will have to additionally pay for the services of a specialist who will take on this task, and this is a few hundred more rubles. Such masters work in any service centers phone repair shop, as well as smartphone stores.
Thus, the cost of buying and installing glass on a smartphone will be at least 1,500 rubles, but this is really profitable, because replacing a broken screen will cost an average of 3,000 rubles, especially when it comes to Apple products.
Despite the fact that you do not need to hire a specialist to install a protective glass on a smartphone screen, when doing this work, you need to remember some subtleties, without which it will not be successful.
Useful advice: Properly selected glass (not only in terms of size, but also in terms of characteristics) protects the smartphone screen from fairly significant mechanical impacts. Moreover, the glass itself does not shatter when broken, reducing the risk of injury to the owner of the phone. Also, the oleophobic properties of the glass make it easier to use a smartphone (fingerprints are almost invisible on such glasses).
How to stick protective glass:
1. Print out the protective glass package. Please note that if a special wet wipe for cleaning the smartphone screen is not included in the kit, you will have to purchase it separately before performing the following steps. You can also use a microfiber cloth to clean your phone screen.
Useful advice: You don't have to buy a microfiber cloth at a store that sells smartphones and other electronics, since the prices for this kind of product are usually overpriced there. Just go to any hardware store.
2. Before sticking the glass, you must thoroughly clean the smartphone screen from dirt, fingerprints, dust. This should be done with a microfiber cloth and a special cloth soaked in alcohol.
3. Remove the film from the protective glass. Lay the glass on the smartphone screen in such a way that the location of the slots in the glass coincides with the position of the speaker, camera, button.
4. Press the center of the glass and the force of mutual attraction of surface molecules will do the rest for you. Glass installed!
Note: if, after installing the glass, you see a speck of dust or a hair that accidentally got between the protective glass and the smartphone screen, do not try to lift the edge of the glass to pull out the debris, since the chance of success of such an operation is small.
This article will tell you in detail about how to stick a protective glass on the phone.
Protective glass is an essential accessory, even for the most budget smartphone, as many users confirm that in many cases, the protective glass saved their device from replacing the touchscreen. At the same time, most smartphone manufacturers are already equipping devices with protective glass.
But, most of all, users are interested in the question of how to properly stick a protective glass on the phone. You will learn about this below.
What is protective glass?
Safety glass is nothing but glass made from controlled chemicals and heat treatments to increase its toughness.
Figure 1. Protective glass is always supplied with an alcohol wipe and a special tool for removing air.
What is the manufacturing process for protective glass?
The production of protective glass is as follows:
- During manufacture, the glass is first heated at a very high temperature. After sufficient heating, the glass is cooled by special equipment. Thus, the glass surface becomes 20 times stronger compared to its initial state, and such glass can be used to protect the smartphone screen.
Video: Litu protective glass production process
What protective glass to choose for a smartphone?
A common question that most smartphone users ask is why it is important to choose a screen protector for your device. best quality. Well, the main reason has to do with its durability and strength.
Why install a protective glass on a smartphone and is it necessary?
If we talk about whether it is worth sticking a protective glass on the phone or not, then let's just say that after installing the protective glass on your smartphone, you no longer have to worry about breaking or scratching your screen.
In addition, the protective glass can protect your phone from shock when accidentally dropped, thus protecting your display. In the event of a serious fall, the protective glass may be partially or completely damaged (depending on the force of the fall), and the smartphone screen will remain intact.
How to stick a protective glass on a smartphone: step by step instructions
1. Prepare your workplace and smartphone
The first and most important step in carrying out this procedure is to unpack the protective glass kit. First, you need to remove the microfiber cloth and alcohol pad from the bag.
Figure 1: Prepare your phone and remove the contents of the protective glass kit. Attention: When installing the protective glass, your device must be turned off.
2. Remove dust, fingerprints from the display
This is an important step because if you do not clean the screen of your device, there will be dust, dirt and fingerprints on the screen later on. You can use an alcohol wipe for this.
Figure 2. Remove all dust particles, prints and marks from the screen of your device. 3. Remove the protective layer from the protective glass
After cleaning the screen of your device, you need to remove the protective glass from the kit. There is a film layer on one side of the protective glass. You need to remove this layer to expose the adhesive side of the glass.
Important: Hold the protective glass by the edges so that your fingerprints do not remain on the surface.
Figure 3 Grasp the edge protective film and remove it from the protective glass. 4. Install the protective glass to the smartphone screen
In order for the protective glass to be installed evenly, you need to pay attention to the bottom and top of the device. After calibrating and aligning, place the palm of your hand on the protective glass on the screen to fix it.
Figure 4: After installation, smoothen the edges of the protective glass to remove any remaining air. How to remove the protective glass from the phone?
In order to remove the protective glass from the phone, just pull on one edge of the glass. In no case do not make sudden movements, otherwise the protective glass may crack.
The screen of any communication gadget needs protection. Even if you have purchased latest model iPhone, then do not neglect the opportunity to install an additional film on the display. This will extend the life of the phone, make it look attractive longer. Such mechanical damage as scratches, bumps will not be terrible if you know how to stick a protective glass on your phone. The task is not easy, but if you follow the instructions, you can do it at home without outside help.
How to stick a protective glass on a smartphone
For a beginner, the procedure may seem complicated, but a few workouts will make you a real expert. It is worth noting that there is no significant difference in whether we glue a protective glass on an iPhone 5, other phone models or a tablet. The procedure remains the same. It is better for an inexperienced person to start from the back of the gadget, and then move on to the screen.
Necessary materials and tools
If you have just purchased a smartphone, then it is important to understand how to stick protective glasses on the phone. The display of the device is very sensitive to mechanical damage. Being just in your pocket, the gadget will be damaged by coins, a fingernail or keys. Even minimal scratches can cause bubbles to form during application. The same goes for situations where you just want to replace your old phone protection.
For the procedure you will need:
- alcohol wipe;
- dry cloth;
- special liquid for cleaning TV or computer screens;
- adhesive tape or dust collector;
- glass.
Step-by-step instruction
An important point is the preparation of the workplace. Choose a room with a minimum amount of dust. A kitchen or bathroom is best. There is too much textile in the bedroom, which attracts particles to itself. Such a moment prevents the correct process and can complicate the procedure. If you do not know how to stick a protective glass on your phone, follow the steps:
- Wash your hands with soap and water, then lay out the equipment, the protective glass for the iPhone 6 or other phone on a clean, smooth surface.
- Before starting the procedure, remove the old film from the device. To do this, pull slightly on the edge at a 60 degree angle.
- Use an alcohol wipe or cleaning cloth to remove dirt from the phone screen. Such a tool is sold in hardware stores or made independently. To do this, you need to mix 5:1 water and alcohol, add some dish gel there.
- We rub the display to a shine. If there are dust particles, then we pass along the surface with adhesive tape or a dust collector.
- We take the device out of the package and remove the film from it.
- We set the protection so that it matches central button gadget and speakers.
- Swipe down the center from top to bottom to secure the patch surface.
- We expel the remaining air from the center to the edges with a credit card or a spatula, which is often included.
Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although tempered glass on the phone has a thickness of only 0.18 mm, it perfectly protects the device from mechanical damage.
Is it possible to re-glue the protective glass on the phone
High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Gently wipe it with a cloth soaked in such a liquid, and let it drain a little. Then set the protection according to the speaker and the button. With light movements from the center to the edges, expel air and liquid. Small bubbles will disappear on their own in a day.
