How do I open the phone cover?
Each of us, sooner or later, is faced with the need to change the battery in a mobile phone or, for one reason or another, get to its "insides" in order to carry out any manipulations. In most cases, this will be quite a trivial task, since many phones have removable back panels that just pry off properly and the cover can be removed without any problems.
Recently, manufacturers are increasingly starting to release phones, the back cover of which can be difficult to remove or not removed at all, like a seamless cover of a monolithic phone. Without tools, for example, you won't be able to remove the back cover of an iPhone. Let's consider step by step using this smartphone as an example, how you can dismantle the back panel.
Removing the cover
For this we need a small Phillips and flathead screwdriver.
- Turning off your iPhone is a must. To avoid damage, you must make sure that the device is completely turned off, and not only the screen goes out.
- We take out the SIM card - this will help prevent its damage during removal back cover... In the article, you will learn what to do in order not to damage it when removing.
- Make sure you are free of static electricity. To do this, it is enough to touch any bare metal.
- We remove the old stickers from the screws. There are two small screws on the bottom of the phone that need to be removed before you can open the phone. They are located on both sides of the connector.
- We open the back cover. Here we need a thin screwdriver, which, after the screws have been unscrewed, must be carefully inserted between the case and the back panel. Alternatively, you can use a suction cup to separate the back panel.
- Disconnect the cable. There is a cable connected to the back of the iPhone that goes to motherboard device, it must also be disconnected.
Now you know how to open the phone cover and what you need to do. The candy bar phone is disassembled in the same way.
ZTE smartphone maker as well as creator operating system Android, took care to ensure that the data security in your device was at the maximum level. But security systems should not reduce the convenience and comfort of using the gadget. Therefore, along with the introduction of symbolic-digital passwords, the user has the opportunity to unlock the smartphone screen and access its data using a picture password.
Forgot password, smartphone is locked
A person, alas, is not a computer, and can easily forget something that literally five minutes ago invented, compiled, and made. This feature of human memory often gets in trouble when the user is faced with the security system of a smartphone. If you forgot graphic password, then you will not be able to enter the system, but you can restore this password, change, in general, unlock the smartphone with special forgetfulness. There are several unlocking methods, and each can be applied by the user depending on the situation.
Method one: Google account
As a rule, every person who is friends with the Internet has an account in Google services, and the ZTE smartphone, however, like other brands and models running the operating system from Google, is tied to this account.
- So, in order to use this unlocking method, you must, of course, enter the wrong password several times, which you have probably already done.
- The system will understand the situation and will offer to reset the password by entering the email address of the Google account with the password from it.
- After the system processes the entered access data, the user enters the system, and you can immediately change the password to a more memorable one.
Method two: unlock ZTE with root
If you do not have such an account, or access to it is also lost, but there is an open root administrative level with enabled cable debugging, then you can unblock it without Google. You will need a computer or laptop and a USB cable.
- We connect the smartphone to the computer, on the latter in command line enter adb shell, adb shell, su, rm / data / system / gesture.key.
- After that, the smartphone must be rebooted.
- When the phone turns on, you can enter the system with any key. Then you just change the password to a new one.
Another way is tied to the installed custom recovery applications. After downloading and installing, you need to follow the instructions given by these programs and applications. This could be a program ClockworkMod Recovery or other third-party applications.
Hard reset
This is the most radical way to unlock, since this procedure will completely erase all the information that is on the smartphone. All files, from music, videos to photos, all games and applications, all contacts not saved on a SIM card, and all settings. If there is no particularly valuable data on the phone for you, then calmly do it.
Although the method itself works on other models of this brand, such as: SFR-114, SFR-231, SFR-232, SFR-341, SFR-342, SFR-343, SFR-251, SFR-251 Messenger Edition, Orange Vegas , Orange Lisbon, Orange Rio, Orange Miami, Orange Rome ZTE Sage, TMN5000, Vodafone Indie, A261 +, X670, X760, X761, X960, X990, X991, N261, N281, N292, N295, S202, GX760, GX761, GR230, GR231, T-Mobile Vairy Touch, T-Mobile Vairy Touch II, Vodafone 547, ZTE Zest, Zong R221, Zong R231 and others. I would like to focus on the fact that the code is generated only 12-character, if your phone does not accept it, then you need to try.
The whole unlocking procedure will not take more than 5 minutes, but it requires some steps on your part.
How do I find out the IMEI number?
First of all, we need to find out the unique IMEI number that is assigned to each device. To do this, turn off the phone, take out the battery and read it on the sticker. Or even easier, we type the combination *#06# and get it. Once we have figured out what IMEI is in our phone, we proceed to calculating the unlock code.
How do I get an unlock code?
To calculate the code of interest to us, go to the page of the free online calculator of the wintechmobiles command, where in the line Enter IMEI enter your number, consisting of 15 digits.
Push Calculate Codes and in a few seconds, the cherished codes are in our pocket!
It remains now to enter the received code into the phone.
How do I enter the code into my phone?
Due to the large number of supported phone models, universal way no input received code. Here are the main ways to unlock phones:
- Install not native SIM card into a locked phone, the phone should ask you to enter the unlock code (NP code?). This is an easy way, you just need to enter the code.
- If the first method didn't work? We take out the SIM card, turn on the phone without it and dial the code ###825*09# there was a request to enter a code? Enter the unlock code.
- Nothing again? try another combination *983*8284# should work .
- For new phone models ZTE such as F102, this combination should work *983*865625#
That's basically all, I think that there is nothing complicated in this procedure. But you can save time and money.
What if the code doesn't match?
Because of the lineup supported by this free calculator is very small, try asking a question on our forum, in the topic. There is a paid option with which codes can be calculated for other ZTE phone models.
Order instant unlock
You can also safely use the services of our partners for unlocking ZTE phones.
Instant receipt of the code after payment
You will not find better deals on the net!
Web Development, WordPress, Mobile.
ZTE Blade AF3 Smartphone - Connecting to a Computer
Options shown ZTE Blade phone connection AF3 to desktop computer... more info on the page - http: // vash-
ZTE Blade AF3 - connection to a computer.
PC connection smartphone ZTE Blade AF3 using a USB cable.
To connect, we will use the usb cable that comes with the phone. At the first connecting ZTE Blade AF3 will display a screen like this with connection options.
To begin with (if you are not in a hurry), you can select the item - USB virtual disk to install drivers for the ZTE Blade AF3 smartphone They may be required - if not now, then in the future for sure. The autorun window appears on the computer monitor.
Click - Run AutoRun.exe and install the program.
More articles about the ZTE Blade AF3 smartphone.
26 comments.
I have a zte blade a813 and I cannot connect to the computer the usb button is not pressed (gray) what should I do?
(Note of the admin - there must be a space between the symbolic smile and letters, as well as punctuation marks ...)
I have not dealt with the phone zte blade a813 and therefore I can only assume ... your problem is a little incomprehensible ... especially about the USB button (where is it generally located) ...
But if you nevertheless connected to a PC but in the connection menu on the phone the item - USB-storage (or something similar) is not active, then click on the item - MTP ... through it, everything can also be perfectly unloaded and loaded into the phone ...
Natasha, I have the same thing on my alcatel phone, the usb button is not pressed "too gray light".
I have a ZTE Blade AF3 t221, I can’t create the firmware that I need to create this phone to make it work.
If you have a stock (factory) firmware on your phone and there is an entrance to Recovery, then you can flash (update) like this - Smartphone ZTE Blade AF3 - system update ...
My computer does not see the ZTE A610c phone, writes that "the equipment could not be installed", and that now I cannot transfer the data from the computer to this new, just purchased phone. Disappointment.
After connecting, open the top panel and look at a notification like - USB connection ... click on it - a window with connection options should open ... mi connection ... select MTP ... or even better - if there is a virtual CD (there may be drivers for your phone) ... The computer should determine additional disk, run "Autorun.exe" on it and install the driver ...
aaaaaaaaaaaaaaaaaaa ... I can't do anything.
If you have a ZTE Blade AF3 - read again carefully on this page ... it should work out ...
Yes, everything works out fine, it's cool. Just transferred music from phone to PC.
How to connect usb.
Everything is written on this page ...
Why doesn't the USB menu pop up to me when I connect the phone to my computer.
It's hard to say so ... after connecting, you need to open the shutter on the phone and see if there is a notification - USB connection ... if there is, open and see the extended menu with a choice of connection ... if not, try to replace it first USB cable another…
Sometimes it does not work. It only takes charge. Plug into another USB. So it happens with old computers, well, with beeches too. Especially with the old one. Because of what they said, it's too lazy to mess around. Just in another slot.
Yes! most likely you need to try to replace the yusb cord.
guys have been trying to flash zte for a day blade af3 I can’t sync with my PC! what to do? where to get firewood! on the computer. Help.
Do you have any drivers, otherwise my computer writes an error and is not installed automatically? What should I do?
I also installed drivers from my phone ... it is not installed automatically - open the folder, copy the file to your computer, unpack and try to install it manually ...
Is it possible for more details about the process?
When flashing the device, you need to do all the wipes in the recovery (before and after) the firmware in order to remove all the tails from the previous installation.
"You can also make wipes (though this removes all user data, applications and accounts) ... and in my opinion, this is not necessary ... because the update does not affect the data section, and the system section will be overwritten anyway ..."
🙂 smiling 😀 laughing out loud :-))) laughing 🙁 Confusion or discontent.
: - || Angry, angry 😉 winking 😛 showing tongue: clap: bravo, clap your hands.
➡ Bang your head against the wall.
In the comments, you can use these HTML Tags and attributes to your comment:
Short description
Shows options for connecting the phone ZTE Blade AF3 to a desktop computer more info. Connecting your ZTE Blade AF3 smartphone to your computer. Connect your phone to your computer as. How to plug ZTE Blade To computer via USB. In this manual, we will tell you how to connect the ZTE Blade via USB to. The computer does not see the phone via USB. If telephone does not connect to computer Try to connect your phone to Like this. Connection and synchronization with the ZTE V880E computer. The first time you connect your ZTE V880E to your computer, the PC needs to How to unlock your ZTE V880E. how to connect zte modem and install for him how to connect a ZTE modem to a computer. if telephone does not connect via usb to the computer. how to connect a phone to a pc. Connect to computer smartphone ZTE Blade AF3 with USB Cable For 7 Youth. Find out how to connect your phone how you can to plug your smartphone to your computer. How to connect to a computer via usb phone ZTE Blade. Hello guest, first you need a native usb cable, the next thing you need is this.
Knowing how to remove the cover from the phone can come in handy especially when you need to change the SIM card, insert the memory card, change the battery in case of damage or purchase a new one, etc.
The principle of removing the cover on mobile devices ah about the same.
Remove the cover
Whatever the reason, removing the back cover is a process that every user of a mobile device needs to be able to do:
- First, take your phone in hand. Now it needs to be turned upside down in order to see the back panel of the device. The whole process will take very little time, but you need to remove the cover with both hands.
- Turn the phone upside down so that the bottom mobile phone(where the microphone is located) was at the top, and the top (where the speaker, which we put to the ear) was at the bottom.
- Now two thumbs with your left and right hands, press the tab on the cover. Usually it is located under the camera, but if there is no camera, then at the top of the lid, or it will be indicated by relief elements. Next, along with pressure, move the cover away from you.
If the phone is new, it will take a lot of effort to open the cover, but over time this process will become easier and easier.
In addition, the covers of some mobile devices are fixed with screws, so all screws must be unscrewed to remove the cover.
