Despite its simplicity, the electronic cigarette is a rather complex product from a technical point of view. In addition, a gadget without proper care becomes capricious and may fail. When using the vape, the user needs to adhere to simple rules for the device to be effective and durable.
Newbies in vaping are primarily interested in the question of how to assemble and refuel their first purchased e-cigarette. Let's consider this process using the example of several popular devices.
Eleaf iJust 2
If you have purchased the basic equipment electronic cigarette, for example, Eleaf IJust 2, then opening the package, you will see the battery, clearomizer, USB cable and silicone ring (used to adjust the tightening force by closing the air inlets), as well as instructions for use, which describes in detail how to use gadget.
To collect the vape, just screw the clear to the battery pack... The battery is charged in USB port computer or laptop. Can also be purchased separately network adapter for charging the battery from the network.
To fill the device with vaping liquid, do the following.
The improved model of the iJust s device provides top filling tank with liquid: the upper part of the tank is removed and the required amount of slurry is poured, as shown in the following photo.
EVOD CE5
The basic package of the EVOD CE5 vape consists of the following components:
- rechargeable battery EVOD 1100 mAh;
- clearomizer CE5;
- USB charging cable with connector suitable for EGO batteries;
- 1 bottle (11 ml) with a liquid of your choice.
The assembly of this vape is also very simple: twist the clearomizer and the battery together. The battery is charged by PC or laptop as mentioned above. Refueling this device is distinguished by its simplicity:
- first, you should unscrew the mouthpiece;
- after disconnecting the mouthpiece, it is necessary to take a bottle of liquid and fill it in such a way that it flows down the walls, bypassing the central hole;
- on average, the flask should be filled up to half or a little more;
- after refueling, screw the mouthpiece back into place and check that the liquid does not leak out, after which the device can be used.
Joyetech eGo AIO
The starter kit of the Joyetech eGo AIO device includes the following components:
- vape complete (with a mouthpiece), but without a vaporizer;
- 2 replaceable BF 316SS stainless steel evaporators with 0.6 ohm resistance;
- glass mouthpiece - 1 pc .;
- charging cable (micro USB);
- instructions for use.
Assembling the vape is quite simple, as shown in the following figure.
But the device is charging after micro USB port built-in on the side of the device.
The battery can be charged from a PC or from network adapter(sold separately) with DC 5V output. When the battery is fully charged, the indicator on the button turns off.
But the fact that you put all the components together is not enough to start the machine. You also need to pour liquid into it. This is done as follows:
How to turn vape on and off
Many beginners, without reading the instruction manual for the vape, trying to turn on the gadget, feel frustrated and panic because their electronic cigarette does not turn on. This happens for the reason that modern vapes are protected against accidental activation, for example, in a pocket or bag. To unblock the vape, as well as turn it on, you need to press the key 5 times within 3 seconds... If you want to turn off the device after vaping, repeat the same procedure again.
If your e-cigarette does not have any buttons, it means that it will automatically activate when you puff.
How to set up a vape
The electronic cigarette in the form in which it was presented above does not need special settings. Unless you can adjust the tightening force. Also, some more "advanced" vapers try to rewind the spiral themselves in order to change its resistance to achieve a different taste sensation while vaping.
For vapers who are no longer satisfied with the standard electronic cigarette, there are so-called box mods, representing a battery pack. The mod is equipped with an electronic control board and a small display. Thanks to the electronic filling, it becomes possible to more accurately adjust the vape to the needs of any bather. Therefore, adjusting the vape consists in setting several parameters.
Power
This refers to the power that acts on the coil of the atomizer (steam generator). The larger the spiral, the more power can be applied to it. But everything must be within reasonable limits, otherwise the heating element may burn out. Also, the selected power directly depends on battery discharge time: The higher it is, the faster the battery will drain. It is recommended to set the average power value - from 15 to 20 watts.
If the power value is exceeded, the following negative points may appear.
- The battery will quickly lose power.
- There will be a strong heating of the case (sometimes it is difficult to hold the vape in your hands). In this case, the device must be turned off and allowed to cool down for a while.
- Perhaps burning of the wick, and as a result - a burning taste while vaping.
Varivolt
The varivolt function allows you to manually change the voltage supplied to the coil. Moreover, the power will depend on the resistance of the heating element. Based on this, it turns out that the volume of the inhaled air-vapor mixture depends on the voltage.
The principle of operation is quite simple: the higher the voltage value is set on the fashion, the more the spiral heats up, as a result of which the amount of steam increases and the aroma of the slurry is revealed brighter. But if the voltage is exceeded, the wick will burn, and a burning taste will appear. Therefore, this parameter is selected by trial and error.
When changing the clearomizer (with a different resistance) again using the selection method, you will need to adjust the required voltage in order to achieve the required results.
Varivatt is the ability to adjust the power of the vape, if you changed the resistance of the coil, it is improved version of varivolt... If your mod has a “varwatt” function, then, as a rule, there is no need to manually adjust the voltage. This is because the voltage automatically adjusts to the resistance of the heating element. Thanks to the “variwatt” function, as in the Kangertech KBOX 120-200W box mod, a more precise vape adjustment takes place, allowing you to achieve maximum results from the device without breaking the coil.
This function gives the vaper the ability to comfortably use the device. It is enough just once to set the power that is comfortable for the bather and not to worry when changing clearomizers, what is their ohmicity. The mod will adapt itself to the resistance of the clear and equalize the power to the previously set values. Therefore, whatever clear you set, the power will not change, and the bather will always be able to observe a lot of smoke.
Thermal control
This function is not available for all vapes. But if it is present in your gadget, then you do not need to configure it... Thermal control works in full automatic mode and is available only if your device has a nickel or titanium coil. Only with such metals is the electronic filling of the vape capable of working.
Thermal control works as follows: if during vaping the temperature of the coil reaches a critical level, then the power is reduced so that the heating element can cool down. For a vaper, this process usually goes unnoticed.
Vaping rules
Vaping novices who are accustomed to smoking traditional cigarettes often make mistakes while vaping. As a result, side effects such as overheating of the device, leakage of liquid from the mouthpiece, the appearance of a burning taste, and others may occur. But, if you use the gadget, adhering to the following rules, then all these troubles can be avoided.
- First puff rule... It is imperative to observe it every time you are going to start vaping. It consists in the fact that the vaper must take the shortest possible puff so that the wick begins to soak well with liquid, as if lighting a cigarette before starting to smoke.
- First, it is recommended to take steam into the mouth, and then try to inhale it into the lungs. Do not inhale deeply right away, as the vaping liquid can be strong enough. To get used to the steam, take 10 to 12 short and, if possible, shallow puffs. This is how many puffs it takes to smoke a regular cigarette.
- Follow frequency and depth of puffs... Shallow but long puffs will allow the atomizer to generate a rich and dense vapor. Avoid sudden breaths - this will cause condensation to form, which can get on the battery contacts and cause a short.
- Do not hurry... The fact is that when tightening, the spiral heats up, which, in contact with the wick, evaporates the liquid. It is necessary to let the spiral cool down, and to fill the wick with liquid the place from which it evaporated. If you take frequent puffs, the wick will burn, and the spiral will overheat.
- Hold the vape correctly... While vaping, the device must be held in such a way that it is slightly tilted. Thanks to this position, a more uniform flow of slurry into the evaporator occurs.
- In some mechanical models of electronic cigarettes with a button (mech mods), in order to take a puff, you need to press the button on the body of the gadget while inhaling, and after the end of it, release it. Some vapers like to use the mech mod, but most still prefer the automatic inclusion of steam.
Security measures
When using the vape, you must follow the safety rules.
- Do not let the liquid get into your eyes, mucous membranes and tongue. Moreover, you cannot swallow it - this can cause poisoning.
- Avoid direct sunlight and do not keep the device in a room if the temperature is high.
- Take all measures to ensure that the electronic cigarette did not fall into the hands of children.
- Do not clean a gadget connected to a charger. Before preventive cleaning of the vape, it must be turned off (by pressing the button 5 times) and disconnected from the charger, if the device was connected.
- Do not charge the vape in a damp room or outdoors in wet weather.
- Can't hover while driving... Remember, vaping is dangerous while driving, as the thick cloud of steam interferes with vision.
Smoke rings are easy
Well, you have learned to smoke, that is, to vape. What's next? Bored smokers have long figured out how to make this process more interesting. It consists in blowing smoke rings. Vapers have successfully adopted this experience and offer 3 basic ways to do this trick from steam.
- Draw lots of steam into your lungs. Put your lips together as if you were pronouncing the letter "O". In this case, the tip of the tongue should be fixed in the center. Exhale briefly and lightly, as if coughing. After a few workouts, you will be able to make beautiful and even rings.
- Take a lot of steam, then roll up tube lips and pull them forward a little (tongue help is not needed). Push the steam out of your lungs as quickly and as often as possible. With this method, the first and last rings are not obtained, but in general, the result is quite good.
- This way of making rings is called method "W"... If you master it perfectly, you can make very beautiful and even rings of smoke. But first, learn how to pronounce the English letter “W” correctly. It sounds like "Ay" or closer to "Oh". After working out the correct pronunciation, you can start learning to blow rings from steam. Steam your cheeks, then fold your lips as if you are preparing to utter the sound "O" and say the letter "W" while blowing smoke from your mouth. When you pronounce the English letter, your lips should be as tight as possible. To change the size and clarity of the rings, you can change the diameter of the lip circumference.
Any vaper can learn how to properly release steam rings, as in this video. But vaping fans went further and started to complicate the process. For example, you can release a jellyfish-like fog cloud like in the following video. Enjoy your soaring!
Before using your e-cigarette and assistive devices, please read the following information carefully and strictly follow the described methods of use.
Use of the "Electronic Cigarette"
After correct installation the new cartridge and battery "electronic cigarette" goes into standby mode, to smoke the cigarette you need to take a puff. If the amount of smoke decreases during smoking, the old cartridge should be replaced. When used lithium battery is discharged, the indicator on the front of the cigarette will be constantly on, which means that it is necessary to replace the lithium battery with a charged one.
Using an AC charger
Insert and screw the lithium battery into the appropriate connector on the charger. The charger operates on a household network with a voltage of 100-240 V 50/60 Hz. To clean the charger, disconnect it from the mains to eliminate the risk of electric shock. The charger cannot be used outdoors or in a humid environment.
Pocket Precautions
When you carry an "electronic cigarette" with you, disconnect the battery and avoid shock or strong pressure on the components of the cigarette.
Electronic Cigarette Components
The "electronic cigarette" is a high-tech product and requires only appropriate components such as cartridges, Charger, battery, etc. The use of components not intended for the "electronic cigarette" can damage or break the product.
Use in public places
The "electronic cigarette" does not produce sidestream smoke and does not harm the surrounding people and the environment; The "electronic cigarette" does not need to be lit, which eliminates the risk of fire. This allows you to safely use the "electronic cigarette" in almost any public place.
Do not use "e-cigarette" while driving a car
When driving, make sure that you do not violate the local laws of the country or region where you are, concentrate on driving and watch the road conditions. Do not use the "e-cigarette" while driving and store it in such a way as to avoid damage to the product.
Precautionary measures
Do not use or store the product in humid and / or hot environments.
Do not let children play with the e-cigarette or its components. Avoid actions that could damage the product. Keep the electronic cigarette out of the reach of children.
When using an "electronic cigarette", the duration and frequency of puffs should not exceed the duration and frequency of puffs when smoking regular cigarettes.
Product description
The principle of operation of the "electronic cigarette"
The e-cigarette uses advanced microelectronic technology and ultrafast physical air ionization technology to spray a high purity tobacco-derived nicotine solution into smoke for smoking, according to the needs of smokers. Nicotine solution contains nicotine, tobacco flavor and more.
The advent of electronic cigarettes is a revolution in the history of human smoking. Undoubtedly, their appearance is good news for all people, especially for most smokers and will make a profound change in the way people live. We are confident that electronic cigarettes will be able to eliminate the harmful effects of tobacco on people.
"Electronic cigarette" refers to non-burning electronic cigarettes with the same principle of use as conventional cigarettes, satisfying the smoking needs of smokers, is enjoyable and relaxing. Thus, the "electronic cigarette" is the best replacement for traditional cigarettes.
The main advantages of the "electronic cigarette":
- Lack of resins and carcinogens harmful to humans
- It does not burn when smoked and, unlike ordinary cigarettes, does not emit about 4000 chemical compounds.
- Harmless to others and does not pollute environment sidestream smoke.
- No hidden fire hazard, can be used in public places.
- Works in a wide temperature range from -5 to +42 degrees.
- Designed for the convenience of the smoker: smoke temperature is close to body temperature.
- Uses an electromagnetic shield, does not emit electromagnetic radiation.
- The nicotine content of each liquid container is less than 20 conventional cigarettes.
What does the "Electronic Cigarette" consist of?
Cigarette body
The body of the cigarette is one-piece, consists of a stainless steel shell, a lithium-ion battery, a microprocessor with a program, an air ionization chamber and a cartridge. At the front of the cigarette there is an indicator light for the operating mode.
Replaceable cartridge
An e-cigarette cartridge consists of a filter and a liquid container. This container contains a spray solution of nicotine without substances harmful to humans, such as carcinogenic.
The filter is for single use only.
The cartridges differ in nicotine content at high, medium, low and zero (high, medium, low nicotine and no nicotine, respectively). Nicotine free cartridges can be in different flavors to suit different people's tastes.
Battery and charger
For the "electronic cigarette" special lithium ion batteries and the corresponding charger, neither the batteries nor the charger can be exchanged for others. The input voltage for the charger is 100-240 VAC, 50/60 Hz AC. When traveling, please note that the voltage in your local household power supply meets the requirements of the charger.
Using the "Electronic Cigarette"
- Installing the cartridge:
First step: remove the cigarette cartridge from the packaging and remove the protective cap.
Second step: insert the cartridge into the cigarette body.
- Operating modes:
When the cigarette is in the mouth and the smoker takes a puff, electrical circuit is instantly activated and the indicator on the front of the cigarette lights up. When the puff is stopped, nebulization stops immediately and the cigarette goes into standby mode. The best position for the cigarette to work is horizontal, it is not correct to use the cigarette in an upright position to avoid droplets of liquid from the filter and getting on the lips, as they can cause mucositis of the oral mucosa. The program built into the microcontroller has a self-cleaning function: when the number of puffs reaches 1500, the indicator on the front of the cigarette will remain on for 6 seconds, which means that automatic program cleaning.
- Battery replacement:
If, while using a cigarette, you find that the indicator on the front of the cigarette blinks 20 times, then the battery may need to be replaced.
- Replacing the cartridge:
If, when using a cigarette, it seems to you that the smoke has significantly decreased, please replace the cartridge.
Battery charging
If you find that the indicator on the front is blinking while using a cigarette, use the supplied charger to charge the depleted battery. To charge, connect the power cord to the charger and plug into a power outlet, screw the battery into the corresponding socket of the charger. After charging for 3-4 hours, the charging indicator will change color from red to green, which means that the battery is fully charged, then please remove the battery from the charger and disconnect the charger from the mains.
Precautionary measures
- Do not charge batteries near high temperature heaters.
- Do not disassemble or pierce batteries with nails or sharp objects.
If you find that the battery produces an unpleasant odor or heat, or is discolored, deformed, or something unusual happens to the battery while charging, immediately unplug the charger and disconnect the battery from the cigarette or charger and do not use it again. battery.
This charger can only be used to charge special lithium-ion batteries from an electronic cigarette. Do not attempt to use this charger to charge other batteries.
Keep the e-cigarette and cartridges out of the reach of children.
For the "electronic cigarette", only the appropriate charger and batteries provided by our company can be used.
The first battery charge should take 8 hours, with normal use, charging takes 3-4 hours.
It is forbidden to get the nicotine solution contained in the "electronic cigarette" cartridge on the mucous membrane. The liquid should not get directly on the lips; if you take too many puffs, the nicotine solution may get on your lips.
The "electronic cigarette" is a high-tech electronic product, and should be avoided from being hit or dropped.
To prevent the cigarette being used too often, the indicator on the front will blink for 10 seconds, reminding you that the cigarette has been used 15 times in one minute.
Applicability
Suitable for:
- People with extensive smoking experience who suffer from uncomfortable sensations without smoking cigarettes
- People who work for a long time in places where smoking is prohibited, but who have a smoking habit.
Not suitable for:
- Young people under the age of 18
- People who do not have a smoking habit
- People who are allergic to nicotine or any component of the aerosol
- Pregnant and lactating women.
Frequently asked questions and answers about the "electronic cigarette"
Q: Why the electronic cigarette does not produce smoke when used, the indicator light is on normally, the vaporizer is working?
Answer: This happens because the cartridge is completely used up. Replace the cartridge and the cigarette will work fine.
Question: Why, when using an electronic cigarette, does it stop working after the indicator has blinked several times?
Answer: The front indicator blinks slowly 20 times, which means that the battery needs to be replaced. If you continue to use the cigarette after this, the electronics will not work. After charging the battery, the cigarette will work normally.
Q: Why does the indicator stay on when using a cigarette and the vaporizer seems to keep working after stopping the puff?
Answer: The electronic cigarette can automatically clean the vaporizer from time to time, thus ensuring that the vaporizer works. If this behavior occurs too often during use, it may be because too much liquid is clogging the flow path. In this case, the cartridge should be removed, the excess liquid will be removed by the forces of reverse aeroionization. You can then use the cigarette as usual.
Question: When I put my cigarette on the table or do business on the street, I do not puff. Why does it turn itself on? This is dangerous?
Answer: The electronic cigarette is very sensitive electronic device... Air flow, sound and vibration can activate electronic circuit... Please keep the cigarette away from strong wind, sound and vibration when not in use. Electronic cigarette uses lithium ion battery... The interior has an excellent protective circuit and is not hazardous. However, if stored for a long time under the conditions mentioned above, the battery life will decrease.
Q: Why does the front indicator light up very often when using an e-cigarette? After that, it stops working, but after a short time it can be used again.
Answer: The insides of the e-cigarette have a protective circuit. If you take 20 long puffs, it turns on automatic protection... But within a minute, the cigarette can be used again.
After a short break, Kangertech has launched a new product on the vaping market - the Kanger K Pin Kit electronic cigarette, which belongs to the ego format. The device is on a par with such vaping devices as the Stick V8. An undoubted advantage this format is its compactness and functionality.
The built-in battery and replaceable vaporizers allow you to use the device as they say "on the run" when you are on the road or have a quick desire to steam at the airport before departure. The highlight of the e-cigarette is the telescopic mouthpiece, which is pulled out by turning the top of the clearomizer. And now about everything in order.
Equipment
Operating instructions, USB cable for charging the device, two replaceable 0.2 Ohm evaporators from 25 to 60 W, starter kit.
Overview
The Kangertech K Pin Starter Kit is a starter kit for people who just need to change replaceable coils on time and recharge the device, and of course refuel the device. You don't need to do anything else. His color palette looks like this.
The device is made of aluminum and actually consists of two main parts: the battery part and the clearomizer. The cleric, in turn, is disassembled into three parts.
Dimensions:
Height of e-cigarette: 134.5mm
Battery pack height: 77.5 mm.
Diameter: 24mm
Weight: 132 gr.
In the battery part, the battery itself with a capacity of 2000 mAh (3.2 - 4.2V) and the device board. The Kangertech K Pin Starter Kit has a light indication of the battery charge, by the glow of which you can monitor the charge level. The board provides all the necessary protections. So, if the electronic cigarette flashes yellow, it means that a short circuit has occurred in the circuit. After flashing 15 times, in this case, the Pin Kit 4ml will automatically shut off.
At the bottom of the battery part there are holes for exhausting gases, and at the top there is a connector for recharging and a faer button, which has a tangible click. In addition, in the upper part there are notches on the connector pad, as well as a brass spring-loaded pin, which springs well. On the K Pin Kit by Kangertech, you can wind other atomizers that he "sees" and works with them.
The tank is completely made of metal, the window for controlling the liquid is recessed, which is good, since in the event of a fall, the glass may not break. The clearomizer consists of three parts: a mouthpiece that acts as a drip tip, a liquid bottle and a base. The mouthpiece is telescopic and extends by turning it clockwise. Perhaps this was done so that after vaping, the mouthpiece could be hidden, and the device could be put in a bag, without fear of dirt getting onto the mouthpiece.
The drip tip is twisted counterclockwise and we are immediately greeted by filling holes, which are convenient and can be filled with various spouts of bottles with liquids. Holds 4 ml. liquids. The base at the bottom of the cleric also twists counterclockwise. Having unrolled the clearomizer in this way, the flask can be rinsed from the old liquid under the tap with cold water. The evaporator is screwed onto the base. There are air vents at the bottom of the base. The clearomizer lacks the ability to adjust the airflow. At the very bottom of the pin, which practically does not protrude.
The K Pin Kit by Kangertech has the ability to recharge and steam in Pasteur mode, which is good if you are working on a laptop and need to quickly steam near your workplace. Turned on for recharging and soaring. On average, a full charge of the battery should be enough for 1 day of operation.
Turns on K Pin by five times pressing the faer. When vaping, it conveys taste well thanks to its own vaporizers.
Cons and pros
Minuses:
- the evaporators are not separately packed in the kit, so it is possible that they have absorbed various foreign odors, they should be pulled out and allowed to lie in the air for 3-4 days so that they are completely ventilated and do not give the taste of the box at the first puffs,
-short bundled USB cable
Pros:
-telescopic drip-tip, pulled out, steamed, hid again, dirt will not get in,
-quality workmanship, good quality of carvings, K Pin Kit by Kangertech looks decent,
- lifts vaporizers with 0.15 ohm resistance,
-Pastru mode.
Official website of the manufacturer: https://kangeronline.com/products/k-pin-mini-kit
Price on the manufacturer's website is $ 22. As of 09.02.2019
Video
The Kanger TopBox Mini is the starter kit for all newbie vapers. It is a very compact and easy to use electronic cigarette. She has a stylish modern design and has a quality build. Features of this model include a top liquid filling, improved thermal control and an enlarged display for easy viewing. The list of materials used for the spiral has also been expanded. These are nichrome, kanthal and stainless steel.
Functionality
This model has received several significant changes compared to the previous generation.
The device is a variwatt. This means that its power can be adjusted. The working range of the box mod is from 7 to 75 W.
Boxmod supports all types of spirals from any materials. It runs on a standard type 2500 mAh battery pack. The box mod can also be used while charging. The device is equipped with an improved 510 spring-loaded connector. The bright OLED display allows you to track all the necessary settings while vaping. The mod is reliably protected by a special board against short circuits, overcharging and incorrect installation battery. The device has several firmware options from both the manufacturer and fans of this series.
Clearomizer
The tank is made of durable glass and steel. It has a capacious volume of 4 ml. The Mini RBA Plus serviced base also allows you to use your own winding options.
The clearomizer has an upper filling type, which eliminates liquid leakage. The air flow control function allows you to adjust the balance between puffs (cigarette and hookah). This opportunity will appeal to experienced vapers.
Control
The Kangertech Starter Kit has standard controls. There are three buttons on the body of the device: "+", "-" and the main "Fire":
- To lock the device, you need to press the main button five times. Unlocking is done by the same action.
- Modes are switched by pressing the “Fire” button three times.
- To enable stealth mode, you need to hold down the "-" and main buttons.
- To change the power, use the "+" and "-" buttons.
- Left-handed or right-handed mode is determined by holding down the "+" and "-" buttons for 3 seconds.
Electronic cigarettes are at the peak of popularity today, more and more people are armed with this smoking gadget. The world of electronic cigarettes is rich and diverse, but not all models are in demand. Some of the devices lead the rating of favorites, and some weave at the end, remaining unclaimed.
A stable niche among the ES that have successfully proven themselves in use is occupied by the Kangertech electronic cigarette, the instructions for using which are easy and accessible. The products of this company are well-deservedly respected among vapers, although they also have some drawbacks. But all the nuances are more than covered with merits. Let's find out more about the products of this corporation.
Kangertech is a Chinese electronic cigarette manufacturer known to consumers since 2007
All those who are keen on vaping when choosing ES are divided into two categories: the first choose something affordable and cheaper for themselves. But the latter use exclusively high-quality products and do not regret paying a little more for it.
Kangertech is one of the first smoking gadget companies to successfully tap into a wide consumer market.
This is a Chinese company, which was founded in 2007. Its products in a fairly short period of time managed to spread throughout the world, first falling into the hands of vapers in North America and then in Europe. Soon, cigarettes of this brand were on Russian market... One of the most important features of this brand's smoking gadgets is full compliance with the most high standards quality. Namely:
- ISO 14000-standards. Environmental standard of cleanliness and safety of products.
- RoHS. This certificate regulates the presence of toxic and harmful compounds in manufactured products.
- CE. This marking indicates that the products fully comply with all accepted European quality standards and are allowed for sale throughout the entire united Europe.
Smoking gadgets from Kangertech have all certificates of quality and safety
Therefore, users, using the products of this manufacturer, get confidence that the harm caused by the vaping of these ESs is minimized. The Kangertech company has developed and released for sale three directions of modifications, which are the most popular:
- Protank.
- Unitank.
- Aerotank.
Features of the brand
The very first ES brands produced were a rather primitive device. But at the moment, this smoking gadget is more refined and updated. Manufacturers have made improvements by introducing various removable parts, improving the design quality... Modern electronic Kangertech cigarettes have the following advantages:
- affordable pricing policy;
- simplicity and ease of use;
- attractive, stylish design with a variety of color variations;
- passstra function, that is, it is possible to use the ES while charging the battery;
- various ways of charging the ES, using battery and using a USB adapter;
- increased capacity of the battery, which allows you to significantly extend the work of the gadget in offline mode;
- in comparison with electronic cigarettes of other manufacturers, the steam from Kangertech at the exit turns out to be richer and thicker, this is due to the favorable location of the evaporator (near the top of the cigarette).
Disadvantages of models
But, despite all the efforts for the constant development and improvement of the smoking gadget, the models of this category still have drawbacks. According to users, they are as follows:
- Evod Pro cigarettes have a material used in the manufacture of the body and the parts themselves of low quality, which negatively affects the style of operation of the ES and its service life;
- many consumers attribute to an obvious drawback of some models of this brand the too small and very inconvenient window of the atomizer, which allows you to track the level of refueling.
Main technical features
All working nuances of electronic cigarettes of this brand differ and depend on a particular model. The general features include some characteristics of the main devices of the gadget.
Technical characteristics of one of the Kangertech electronic cigarette model
Atomizer
This unit may vary in size depending on the model. For example, the Kangertech Subbox Mini electronic cigarette has a 3 ml atomizer, and the Kangertech DRIPES 80W will delight users with a 15 ml volume.
The main feature of this model's cigarette tankomizer cartridge is its location at the bottom of the device. This solution is quite successful in comparison with analogs. After all, such a configuration gives the following:
- the spiral is constantly in a wetted state, which allows it not to overheat and to work much better and longer;
- the protection of the spiral is provided even with a miniscule level of slurry in the smoking device.
In modern developments of electronic cigarettes of these brands, there is a possibility of full or partial replacement of the evaporator. Especially for such cases, several spare parts are included in the kit.
Battery
The battery capacity also depends on the Kangertech e-cigarette model. It is on its volume that the duration of the battery charge and the duration of the use of the gadget depend. This indicator varies and may show:
- 650 mAh;
- 1 100 mAh;
- 1 900 mAh.
Kangertech models with a large battery capacity are most in demand, since they have to be recharged less often.
Evod Mega cigarettes - innovative models
One of the latest delights of the company's specialists was the Kangertech Evod Mega electronic cigarette. The name itself tells that this model has a large size. This feature guarantees many advantages and benefits.
Kangertech Evod Mega electronic cigarettes are the latest development of the company
Gadget characteristics
One of the main advantages of this model is the large battery capacity. Its power fits into the indicators of 1,900 mAh, which allows you to use the gadget in full for a long period of time. Due to the increase in battery power, the volume of the cartridges was increased to 2.5 ml, which allows the user to vape the device for 20-23 hours.
The Kangertech Evod Mega model provides battery charging using a miniature USB adapter.
The resistance of the coil in this modification is 1.5 ohms. But the design of the evaporator includes two spirals, which greatly extends the life of the gadget. This results in a particularly rich and aromatic steam output. The whole structure reliably protects against external influences extra strong steel body, giving it a presentable and solid look.
Who is it for
This model is designed primarily for people who, in the recent past, were active smokers of regular cigarettes. Manufacturers especially recommend using this brand for people who are trying to part with tobacco addiction and have previously smoked at least a pack of classic cigarettes per day.
But this does not mean that ex-heavy smokers should use this brand. Anyone who wants to diversify their lives using a smoking device can use a powerful, high-quality and very attractive gadget.
How to properly charge Evod
This procedure can be performed in various ways. It plays a role here, whether you charge the gadget for the first time or after a time of use. The differences in this modification include the fact that the battery is not charged quite normally. First, the battery needs to be "overclocked".
The Kangertech Evod Mega ES includes a miniature USB charger
First recharge
- The battery is screwed into the supplied charger and plugged into a regular outlet, where it is left for 8-9 hours. Even if the level indicator lights up earlier than the allotted time, you should not turn off the charger.
- After the allotted time, the gadget can be disconnected from the network and used for 15-20 minutes.
- Then we reconnect the battery to the charger and leave it for an hour.
- The battery is now fully charged and ready for extended use.
Standard Charge
- The battery is screwed into the charger and plugged into an outlet for 2-3 hours.
- If the indicator signals before the allotted time, we ignore its signal.
- The battery is ready for use after 3 hours.
If the gadget is charged using the included USB adapter, the device is charged for exactly the same time as in the case of charging from a regular network. The difference is that instead of the adapter, the adapter is connected to another electrical appliance.
When recharging this model and monitoring the battery status of the ES Evod, it will be useful to take into service several useful recommendations from experienced vapers. They are as follows:
- keep the ES and all parts included in the kit away from children and animals;
- try not to test the strength of the battery, do not drop or hit it;
- you cannot recharge the gadget on the street or in conditions of aggressive temperature regime(in the cold or heat);
- use only "native" accessories as a charger, otherwise the battery will quickly fail;
- in case of detection of unusual situations (burning smell, strong overheating of the battery, change in its color or shape), it is necessary to urgently change this part.
How to refuel ES Evod
This is a very responsible process. With an inept and illiterate refueling, the smoking gadget will simply refuse to work. Refueling is performed as follows:
- Disconnect the mouthpiece from the device.
- Turn the atomizer down (so that the mouthpiece "looks" at the floor).
- Carefully pour the slurry up to the boundary line. Pour in very carefully and make sure that the dressing does not get on the rest of the cigarette.
- Assemble the device.
- Wait 2-43 minutes. This is necessary so that the wick is completely saturated with liquid.
- The device is ready for use. It remains only to turn on the button and enjoy the fragrant steam.
When refueling a cigarette cartridge, it is strictly forbidden to use other substances that are not intended for refueling. Only aroma liquids specially developed for electronic cigarettes are used.
Electronic smoking gadgets from Kangertech are readily used today by both experienced, advanced vapers and beginners in this business. Such a huge interest and large audience girth is easy to explain.
Despite the fact that these ES do not belong to the elite premium products, manufacturers do not stop in successful attempts to improve their brainchild. And the visible results allow us to successfully conquer the market.
In contact with
