How to set up mms messages on a samsung phone. Setting up and sending mms from android. Manual setting of MMS

In the overwhelming majority of cases, when installing a new SIM card, the smartphone automatically receives the MMS settings and mobile internet... But sometimes failures can occur, as a result of which the user has to manually set the desired parameters. In this article we will tell you how to set up MMS on Android.

To open MMC settings, you need to do the following:

Step 1... Run the app Settings and select the section " SIM cards and mobile networks».

Step 2... Please select SIM card for which you want to configure MMC.

Step 3... Click the " Access points».

Step 4... Select an access point for MMS and in the next window set the parameters required for correct reception and sending of multimedia messages.

MMS hotspot settings vary from operator to operator mobile communications... To save your time, we have collected links to the corresponding MMS settings for gadgets under Android the largest providers in Russia and neighboring countries:

How to send MMS from Android

Previously (on push-button telephones), in order to send MMS, you had to select the appropriate option in the messages menu. V modern smartphones everything is much simpler: just attach, for example, a photo to a text message, so that it is automatically converted into a multimedia message. This works in the opposite direction - by deleting all multimedia files from the created MMS, you will turn it into an SMS message.

Conclusion

Setting up MMS on Android is very simple - just use this guide - and in a couple of minutes you will be able to send and receive multimedia messages on your smartphone.

Your question:

How to set up mms on Samsung phone?

The master's answer:

MMS is a system for exchanging media content. According to the MMS 2.0 standard, the volume of a multimedia message should not exceed 999 kilobytes. But at the discretion of the operator, another maximum size files to be sent.

First, find out the number of the support center of your cellular operator... It is indicated on the starter package of your SIM card. Call it and, according to the prompts, select the required block to order MMS service settings for your phone. If it is easier for you to work via the Internet, then on the portal of your operator, select the subscriber account management unit.

After authorization, enter the services section and send a request for MMS activation. Here you can read the terms of use of this service and find out the cost of MMS messages. The service will be activated within 24 hours. If the connection is successful, you will receive an SMS notification. In another case, you need to try to order the service again or contact the operator to solve this problem.

After connecting MMS, check if the settings on the mobile phone have been applied correctly. How to check MMS settings can be found in the instructions for the phone. The further process will be described using the example of a mobile Samsung devices L310 LaFleur.

Enter the main menu, then to the item "Messages", "Settings", "MMS-messages" and finally into "MMS profile". From the list of profiles like MTS MMS, Life MMS, etc. select the profile appropriate for your carrier. Thus, MMS messaging is configured correctly and you can send your first MMS.

To do this, enter the main menu, in which select "Messages", "Create" and "MMS". You can add pictures, videos up to 16 seconds in length to MMS, music files up to 300 kilobytes and text up to 1000 characters. Then click the "Submit" button. To check the service efficiency, call the subscriber to whom the MMS was sent.

If you can't open MMS messages or send messages on Android, the first step is to check the APN settings. The configuration is sent by the operator when the phone is switched on for the first time with a new SIM card. However, the settings may fail or turn out to be incorrect after changing the SIM card.

This article is suitable for all brands that produce phones on Android 9/8/7/6: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

Reasons why MMS do not reach / come on Android

The main reason for problems with MMS is wrong setting parameters in the system. This is true for both the sending side and the receiving side. But there may be other reasons:

• The phone does not support the message format sent by another user.
• The size of the MMS is larger than the free space in the smartphone's memory.
• The function is disabled or is not supported in the tariff plan.

First, you need to check the MMS settings on the phone, and if they turn out to be correct, then the next step will be to call the operator's support service.

Configuring MMS reception for Android

Any operator, whether it is a long-running MTS or a relatively new Yota, sends the Internet and MMS settings when the SIM card is first inserted into the phone. But some users ignore the configuration message and do not save the parameters. As a result, attempts to use mobile traffic to access the Internet or send / receive MMS fail - Android does not understand what data to use to complete the task.

Therefore, in order to understand why MMS is not loaded on Android, you need to make sure that the necessary parameters are added to the system. Each operator has its own identification data, but the procedure for setting up the Internet and MMS is the same for everyone.

Automatic tuning

If you did not receive configuration messages or simply deleted it, do not know where the MMC and Internet settings are stored, then use the option to order parameters from the operator. Each provider has a special number for calling or sending SMS with a specific text. Example for the Russian Federation:

• МТС - call to 0876 or empty SMS to 1234. You can order separately MMS settings by sending "MMS" to 1234.
• Beeline - command * 110 * 181 # or call to number 060432.
• Tele2 - call 679.
• Megaphone - send "3" to number 5049.

In addition, each operator on the official website has a subscriber's personal account, through which you can manage services, including ordering Internet and MMS settings. Authorization in personal account passes through the phone number and password received in the SMS.

Manual setting of MMS

If the automatic configuration does not work (the operator does not send the settings, or they are not saved in the phone), add the parameters manually. You can view them on the website of the mobile provider in the "Help and Support" section. To perform manual configuration, you need to know where the MMS parameters are stored in Android. The following instruction will help:

1. Open your phone settings and go to the "Data transfer" section.
2. Turn on mobile data by sliding the switch to the active position.
3. Return to the settings menu. Open the "More" section.
4. Go to "Mobile networks" and select "APN access points".
5. Call the additional menu and choose to add a new point.

Depending on the model of your smartphone, the names of the items may differ slightly, which is due to the Android shell of the manufacturer of your smartphone.

The APN setup menu will appear, in which you must specify the MMC parameters provided by the operator. They are the same for everyone Android versions... For example, to set up MMS on Tele2, you must fill in the following fields:

1. Name - Tele2 MMS.
2. APN - mms.tele2.ru.
3. MMSC - http://mmsc.tele2.ru.
4. Proxy - 193.12.40.65.
5. Port - 8080.
6. Authentication is not.
7. APN type - mms.

After entering the connection parameters, save the configuration, restart your smartphone and try sending MMS or ask a friend to send you a photo message. To configure MMS for other operators, use the table below or find the parameters on the official websites of mobile providers.

The MMS function is supported by many modern phone models. The ability to send multimedia messages allows users to mobile phones share with each other impressions of the rest, walk, wish you a great mood along with a beautiful melody or an interesting picture. This function is actively used today by those subscribers who own old models of cell phones. Also, multimedia messages are convenient when it is not possible to use more modern methods of transferring information - Wi-Fi and WhatsApp.

The question of how to set up MMS is asked by the subscribers of all existing operators. The configuration system for sending multimedia messages is approximately the same for all operators. In order to be sure that the function will become available and it will be possible to use it, you need to make all possible settings, which include the following three steps:

• Step 1 - you need to activate the service;
• Step 2 - set up account;
• Step 3 - check your phone settings manually.

Consider the features of connecting the service and setting up an account within each mobile network... Step 3, which includes manual configuration of the device, will be considered separately - it does not depend on the operator.

Configuring MMS on Tele2

The question of how to set up MMS on Tele2 will be resolved after you choose any of the following methods:

After completing the necessary actions, the service will be activated, and the account settings will be activated.

Configuring MMS on MTS

It is also possible for MTS users to set up MMS automatically. In order to connect the service and activate the necessary settings, you need to choose the method that is most suitable and convenient for you:

1. Make a call to number 0876.
2. Send a free message with the text "MMS" to number 1234.
3. Dial the command * 111 * 18 #.
4. Use an assistant.

The settings received in the SMS message must be saved on your device.

Configuring MMS on Beeline

The question of how to set up MMS on a phone operated by Beeline is solved by very simple and fast ways: The first method is to activate the service called "Three-Service Package", which includes WAP / GPRS / MMS. This can be done by dialing the command * 110 * 181 # and the call key on your phone. Thus, you will activate the service and activate the account settings. The second way is to activate the service in your personal account.

Configuring MMS on Megaphone

Megafon has provided subscribers with ample opportunities to manage the settings of their phone.

Therefore, the question of how to set up MMS on a phone with a Megafon SIM card is not a problem. Choose the method that is most convenient for you:

• Send SMS with number 3 to number 5049.
• Use the self-government service * 105 #, where then send a request 6 (Settings) - then 1 (Phone settings) - and 1 (MMS).
• Order settings on the company's website.

Setting up your phone manually

This step is necessary in order not to hesitate any more and to be sure that multimedia messages will be sent from your phone without unnecessary hindrances. It consists of several actions:

1. In the phone menu, find the "Settings" ("Options") tab, then "Configuration".
2. Check the MMC message configuration parameters:

• access point in Tele2 - mms.tele2.ru, in MTS - mms.mts.ru, in Beeline - mms.beeline.ru, in Megafon - mms;
• username in MTS and Beeline is the name of the company in small Latin letters, in Tele2 - absent, in Megafon - mms;
• the password in MTS and Beeline is the same as in the username, in Tele2 it is absent, in Megafon - mms;
• authentication type - select the "normal" value.

Further actions:

1. Enable the new account as default.
2. Reboot your device.
3. To register your number in the network as an MMS user, you need to send a multimedia message to your phone after turning on the phone

Setting up MMS on iPhone

The question of how to set up MMS on iPhone can be solved by performing a few manual steps.

1. Order a service:

• operator MegaFon - send SMS with the text "gprs" to the number 000890;
• Beeline operator - make a call to the number 067409181;
• MTS operator - send SMS with the text "GPRS ON" to the short number 0016;
• operator Tele2 - make a call to the free number 693.

2. Connect the device to a PC with Internet access and iTunes running. Agree to the "Download updated settings" offer. If there is no offer, it means that the service is configured or the operator is not supported.

3. In the phone menu, open the "Settings" tab, then go to "General", select "Network", go to the "Cellular network" menu.

1. Enter the required values:

• Access point (APN): MTS operator - mms.mts.ru, Beeline - mms.beeline.ru, Tele2 - mms.tele2.ru, Megafon - mms.
• The username in Beeline and MTS is the name of the company in small Latin letters, in Megafon and Tele2 it is absent.
• The password is the same as the username.
• MMSC: Tele2 operator - http: // mmsc: tele2.ru, Beeline, MTS, Megafon.
• MMS proxy: Beeline operator - 192.168.94.23:8080, Megafon - 10.10.10.10:8080, MTS - 192.168.192.192:8080, Tele2 - 193.12.40.65:8080.
• The maximum size is 512000.

So the MMC is configured on your device. Use the service with pleasure!

With the development of the era, mms should have lost their former popularity. But this did not happen for various reasons: firstly, not all people have access to the Internet, and secondly, sending mms messages is much faster than in some messenger.

In contact with

Benefits of MMS

MMS on android

WITH operating system Android in most cases supports data transfer using MMC. You just need to configure it... You can change configurations on android using automatic tuning, you can immediately contact the mobile operator, configure manually or order settings on the operator's website.

Automatic MMS configuration

This method is very convenient, because the technique will do everything on its own instead of the user. The probability of making a mistake or harming a mobile device tends to zero. The only drawback: you can use automatic configuration only once (when you first register on the network mobile operator). How to set up MMS automatically:

1. Install a SIM card.
2. Run mobile device and enter a pin code if required.
3. Receive settings in the form of SMS messages from a mobile operator.
4. Run the configuration and wait for the installation to complete.
5. Now you can read sent messages.

SIM card prices

sim cards

Asking the Operator for Help

Unlike the previous method, you can ask the operator for help an unlimited number of times. But here the user will have to clearly follow the instructions in order to achieve a positive result. Each mobile network operator has its own toll-free technical support number. You need to ask to send MMS settings to a mobile phone number:

• MTS - 0890;
• Megaphone - 0550;
• Motive - 111;
• Beeline - 0611.

After ordering the settings, you must accept them, and then restart the device to start using and sending messages. It happens that the service does not connect the first time and requires additional activation. In this case, you need to call again technical support and ask to enable the service for this number cell phone. After all the manipulations, graphic messages will be activated.

Mobile phone prices

mobile phones

Manual MMS configuration

If it is impossible to get through to the operator, and the MMS service is needed from minute to minute, then you will have to install it on your own. Instructions:

The next steps are operator dependent. Only some of the columns are the same for Beeline, Megafon, MTS, Tele 2, Motiva users. These are "access point type" - mms and "MMS Port" - 8080 (there is an alternative code 9201 for MTS and Tele 2 subscribers). An example of settings for the mobile operator Beeline.

You can specify any username(use symbols of the Latin alphabet). The access point is mms.beeline.ru. Login, or username, will be beeline and the password is the same (also beeline). Enter http: // mms / in the MMSC column. The IP address for this mobile operator is 192.168.094.023.

It is necessary to enter only the specified information, and leave the rest of the columns unchanged. After that, you only need to save the entered data and reboot the mobile device.

Ordering settings on the website of the mobile operator:

1. Go to the website of the mobile operator.
2. Choose among the listed model of your cellular device, enter your mobile phone number.
3. Click "send".
4. For some time, the phone will receive settings that need to be set.
5. Reboot the device after installation is complete.

If it was not possible to achieve success, then the problem is most likely in the actions of the user or in the settings of the phone itself. If you fix the problem it is impossible on your own, you should contact service center mobile operator.

Graphic messages open in the same way as text. If the sent file is not displayed, you need to look at the additional settings for receiving and transmitting MMS messages.