Owners of the XBOX 360 console know that neither the console itself nor its original controllers have Bluetooth modules. They communicate with each other through a special radio interface, so it will not work to connect the gamepad to the tablet through the bluetooth. Microsoft developers made it so that their products could not be used except with its devices. Today we will describe how to connect the XBOX 360 controller for Android in a similar way to connecting via Bluetooth.
Principle of operation
At first, even gamepads from a console could not be connected to a computer just like that, but over time Microsoft released a receiver with which you can connect joysticks to a PC. The receiver is a receiver identical to the one built into the console, so gamepads can easily perceive it as a console and connect to it. Outwardly, such a device looks like a tablet that connects to a PC via a USB interface.
The plus is that, although the device itself is connected to the computer via a cord, the joystick is synchronized via a radio signal, and as a result you get a wireless gamepad. In addition, you can simultaneously connect up to 4 gamepads at the same time, which is very convenient.
Rationality of pairing with Android
If we are talking about connecting the XBOX controller to Android by wireless communication as via Bluetooth, then this method makes sense if you have already purchased the receiver itself. Because mobile games do not yet have support for multiple joysticks, but are designed for only one game pad.
The Receiver itself costs a little less than a dedicated controller for mobile devices which will communicate via Bluetooth and is equipped with a dedicated phone holder. That is, by paying a little extra, you will receive a specialized device with all the conveniences and confidence that all supported games will work flawlessly.
How to connect
If you are already the owner of such a device, then it really makes sense to try to pair the game pad with a mobile device. To do this, the tablet or smartphone must support OTG connection, otherwise you will not be able to connect the Receiver.
- Connect the receiver to your mobile device via an OTG USB cable.
- On the tablet, press a single key to start searching for the XBOX controller.
- Turn on the XBOX 360 controller by pressing the large silver button in the center and activate pairing mode by pressing the small button located on the end of the controller (between the LB and RB keys).
Mobile gaming is an industry that is developing at a rapid pace. Today, you can play a huge number of games on your smartphone: platformers, shooters, strategies, RPGs and much more. Moreover, there are games that have been perfectly ported from consoles or PCs to phones, such as the popular GTA series.
To play all this, it is enough to turn on the game, and the control will be carried out through the screen. But you will soon realize that this is not very convenient. That is why many players are interested in the ability to connect a classic controller to an Android smartphone, for example,. Is it possible?
Preparing to connect the X-Box 360 joystick to the phone
First of all, you need to figure out if this is possible. Partially yes, you can both connect an Xbox 360 controller to your phone and fully play. But this will require special devices and software. It is also important to understand that not all games will receive signals from the controller. With projects available in Google play, there shouldn't be any problems. As for preparation, then you need:
- the controller itself;
- OTG cable for Android device;
- Xbox 360 receiver (for wireless joystick);
- Gamepad software (e.g. USB / BT Joy Center).
Also pre-install on your phone USB program OTG Checker (available on Google Play) to check if your smartphone supports these adapters. If the application gives a positive answer, then you can continue.
Connect an Xbox 360 controller to your phone
The procedure will depend on which controller you have. If the model is wired, then you need to connect it and the smartphone via an OTG cable. Then you can start the game and check if it "sees" the joystick. If everything is in order, then quick setup gamepad, and you can start.
If you have wireless model, then you need to connect the receiver via OTG to the smartphone, start the pairing mode by pressing the button on the receiver and on the gamepad (at the end). After connecting, carry out the further actions described above. It is worth noting that 360 controllers use their own format wireless signal so they cannot be connected via Bluetooth.
This completes the setup. Now you know how to connect your Xbox 360 controller to Android. Just remember that not all games are adapted for a controller. If these are applications that work exclusively with a touch screen, then you will not be able to play.
In this article, I will describe several ways to connect joysticks to an Android device. Joysticks from PS3, Wii and Xbox 360 will be considered.
Modern smartphones often contain good components - dual-core processors, gigabytes of RAM, screens with good resolution... Why not play with such happiness? But for some games, a joystick is more suitable than a touch screen. The touchscreen doesn't feel as good as the buttons. In addition, by pressing buttons on the screen, you cover part of the action with your fingers.
Let's proceed to the connection "rite".
- PlayStation 3 joystick
There are two ways to connect this joystick to your phone.
The first implies the presence of Root rights on the device and a couple of bucks in the wallet.
Naturally, not all devices are suitable. And, in order not to shell out money for a pig in a poke, the author of the program released a separate, free program that allows you to check the compatibility of the phone with the PS3 joystick.
To test, and run it. If after pressing Start, an error will come out Error: Missing required protocol, your device is not suitable for connecting a joystick. By the way, it is likely that after the system update, compatibility will appear.
If everything went well, the Bluetooth address will appear on the screen (analogous to the MAC address)
For a final check, you can connect a joystick. For the first time, you need to "bind" Joy to the phone, indicating to him new address host. To do this, you need to use the program. Connect the joystick to the computer via USB and specify the phone's address in the Bluetooth program.
After pressing the Update button, the joystick will be correct to your phone. Well, at least until the first reassignment.
For the final check, just turn on the joystick. If the light on it stops blinking - that's it, it's connected to the phone. You can press the buttons and watch their display in the program on the phone.
After checking the compatibility, you need to put on the phone full version programs
It will allow you not only to admire the taps, but also to reassign the control of the phone to this controller. To do this, you just need to press Change Input Method and choose Sixaxis Controller
Three more joysticks are connected in absolutely the same way.
The second method is not so difficult, and, in general, is free. But its action is limited to the emulator, in which, in fact, everything will happen.
You can download emulators of various game consoles for Android
The phone must support the USB-Host feature so that a joystick can be connected to its microUSB input. After connecting the joystick, just start the emulator. In the emulator settings, you will need to assign the necessary actions to the buttons (Map item).
If the buttons do not work, look in the settings - other settings (settings / Other Setings) and use the option Use input method... If it still doesn't work, make sure the IME is set as input device in the phone settings. - Wii Joystick
I found as many as four programs (maybe more) that allow you to control your phone through the Wii controller. Two of them are free, and one will cost you almost $ 3
How to use:
After installation, go to Menu-> Language & Keyboard, check Wii Controller
Then select it in the Wii Controller IME settings: Select Input Method -> Wii Controller
Now hold buttons 1 and 2 on the joystick to search, and in the application, press Connect Controllers. After that, you can use the joystick in emulators - just enable the Use Input method in the settings.
(who has root access to the phone, it is better to use)
And here the mapping settings are already in the program itself. To synchronize, you still need to hold down buttons 1 and 2 on the joystick. In the phone menu, you need to enable controller support (as in the previous program)
Similar to the previous program, synchronization occurs as follows:
press button number 1 in the program, hold buttons 1 and 2 on the joystick, press button 2 in the program
Unfortunately, none of the software works in interfaces like HTC Sense, MotoBlur and Samsung Touchwiz UI. - Joystick for Xbox 360
Everything is absolutely similar to the second method for the PS3 joystick, only the receiver will have to be purchased separately (if the joystick is wireless).
That is:
Download the desired emulator
We connect the joystick to the USB-Host and play in the emulator. For details, see the above method for PS3
If you are the owner android device, whether it's a phone, a tablet or even an HDMI stick, then you know what to control games on touch screen not very convenient. Therefore, the question arises, is it possible to connect a gamepad / joystick to a tablet or phone
how to connect a gamepad / joystick to an android phone or tablet. The answer to these questions is possible. But, there is a small nuance, at the moment only not a large number of games support control from a gamepad, but not everything is so sad, large (and small too) game manufacturers see great prospects in android, as in gaming platform, and are releasing more and more successful toys with the support of controllers. A good example of this is the prefix on Android Ouya, or Moga.
Let's still figure out how to connect a gamepad / joystick to an android phone or tablet.
MOGA
MOGA is a gamepad specially released for android, that's why it is the best and easiest way.
And so you bought yourself a MOGA Pro controller (at the time of this writing, $ 50). Pairing it with your phone is as easy as shelling pears:
Download the MoGa tools application from the market, use it to connect the joystick to the phone via bluetooth. The program itself scans your phone for games that support joystick control (GTA3, Nova, GTA VS …….), And you can launch them directly from the application.
Joystick from PlayStation 3
There are 2 different ways to connect your PlayStation 3 controller: via Bluetooth or microUSB.
Option number 1 via Bluetooth.
Sixaxis Controller requires root rights. The program requires only original Dualshock 3 and Sixaxis.
Download and install the program on your computer. Now, using a USB cable, connect the joystick to the PC and launch the previously installed program, in which in the following format: xx: xx: xx: xx: xx: xx there will be a MAC address.
Next, we will install the Sixaxis Controller on our device. Let's start. Press the "start" button, the program will ask Root rights, allow it. A pop-up window should appear with the inscription xx: xx: xx: xx: xx: xx Local Bluetooth Address.
On the PC, enter the address seen on the Change Master phone in SixaxisPairTool, press the Update button.
Now you can disconnect the joystick from the computer, then turn it on using the PS button. So let's check it out. If one light is on, we have done it. If Connection Failed appears - unfortunately, the device is not supported.
After the device is connected, click Change Input Method in the android settings, select the joystick.
The method is simpler - connecting using microUSB. This method has one drawback - the limited use of the joystick. It can only be used in game console emulators.
Host Mode must be supported by the device.
Download and install the emulator of the desired console.
Connect the joystick to the microUSB of our device and start the emulator installed earlier. Now let's go into the settings, assign the necessary actions to the joystick buttons.
If the buttons do not work, you need to find the Use Input Method item in the settings.
Joystick from Xbox 360
You can connect it in the same way as the wireless joystick from the PlayStation 3. However, there is one point to keep in mind.
Xbox 360 controller wireless connection does not exist special application... To get rid of the wires, you will have to purchase a special receiver.
As for the rest, it's just like connecting a PlayStation 3 wired gamepad.
Joystick from Wii
To connect Wiimote, download and install special program Wiimote Controller.
Then turn on Bluetooth and launch the application.
In the application, press the 1.Init and Connect button. Now on the Wiimote, simultaneously hold down buttons 1 and 2. After the application detects the controller, press the 2.Select WiiControllerIME button. Check the box next to WiiControllerIME. Everything, you can play.
