19.02.2021

Alcatel OneTouch Pop D3 - Specifications. Alcatel OneTouch Pop D3 - Specifications Mobile network is a radio system that allows multiple mobile devices to communicate with each other


Information about the brand, model and alternative names of a specific device, if any.

Design

Information about the dimensions and weight of the device, presented in different units of measurement. Materials used, offered colors, certificates.

Width

Width information - refers to the horizontal side of the device in its standard orientation during use.

64.4 mm (millimeters)
6.44 cm (centimeters)
0.21 ft (feet)
2.54 in (inches)
Height

Height information - refers to the vertical side of the device in its standard orientation during use.

121.6 mm (millimeters)
12.16 cm (centimeters)
0.4 ft (feet)
4.79 in (inches)
Thickness

Information about the thickness of the device in different units measurements.

12.05 mm (millimeters)
1.21 cm (centimeters)
0.04 ft (feet)
0.47 in (inches)
The weight

Information about the weight of the device in different units of measurement.

114 g (grams)
0.25 lbs (pounds)
4.02 oz (ounces)
Volume

The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with a rectangular parallelepiped shape.

94.36 cm³ (cubic centimeters)
5.73 in³ (cubic inches)
Colors

Information about the colors in which this device is offered for sale.

White
Yellow
Brown
Orange
Red
Green
Purple
Blue

SIM card

The SIM card is used in mobile devices to store data that certifies the authenticity of mobile service subscribers.

Mobile networks

A mobile network is a radio system that allows multiple mobile devices to communicate with each other.

Mobile technology and data rates

Communication between devices in mobile networks is carried out using technologies that provide different data rates.

Operating system

An operating system is the system software that controls and coordinates the operation of the hardware components on a device.

SoC (System on a Chip)

A system on a chip (SoC) integrates all the major hardware components of a mobile device into a single chip.

SoC (System on a Chip)

A system on a chip (SoC) integrates various hardware components such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software required for their operation.

MediaTek MT6572
Technological process

Information about the technological process by which the chip is manufactured. The value in nanometers is half the distance between the elements in the processor.

28 nm (nanometers)
Processor (CPU)

The main function of the processor (CPU) of a mobile device is to interpret and execute instructions contained in software applications.

ARM Cortex-A7
Processor size

The bit size of the processor is determined by the size (in bits) of registers, address buses and data buses. 64-bit processors offer better performance than 32-bit processors, which in turn are more efficient than 16-bit processors.

32 bit
Instruction set architecture

Instructions are commands with which the software sets / controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute.

ARMv7
Level 1 cache (L1)

The cache memory is used by the processor to reduce the time it takes to access more frequently used data and instructions. L1 (Level 1) cache is small and is much faster than both system memory and other levels of cache. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2.

32 KB + 32 KB (kilobytes)
L2 cache

L2 (level 2) cache is slower than L1, but instead has a larger capacity to cache more data. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for them in L3 cache memory (if available) or in RAM memory.

256 KB (kilobytes)
0.25 MB (megabytes)
Number of processor cores

The processor core executes program instructions... There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to execute in parallel.

2
CPU clock speed

The clock speed of a processor describes its speed in cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

1300 MHz (megahertz)
Graphics processing unit (GPU)

A graphics processing unit (GPU) handles computation for a variety of 2D / 3D graphics applications... V mobile devices ah, it is used most often by games, consumer interface, video applications, and more.

ARM Mali-400 MP1
Number of cores GPU

Like a processor, a GPU is made up of several working parts called cores. They handle the graphical computation of various applications.

1
GPU clock speed

The speed of work is clock frequency GPU, which is measured in megahertz (MHz) or gigahertz (GHz).

500 MHz (megahertz)
Volume random access memory(RAM)

Random access memory (RAM) used operating system and all installed applications. The data that is saved in the RAM is lost after the device is turned off or restarted.

512 MB (megabytes)
1 GB (gigabytes)
Memory type (RAM)

Information about the type of random access memory (RAM) used by the device.

LPDDR2
RAM frequency

The frequency of the RAM determines its speed of operation, more specifically, the speed of reading / writing data.

266 MHz (megahertz)

Built-in memory

Each mobile device has built-in (non-removable) fixed memory.

Memory cards

Memory cards are used in mobile devices to increase the storage space for data.

Screen

The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

Type / technology

One of the main characteristics of the screen is the technology by which it is made and on which the image quality of information directly depends.

TFT
Diagonal

On mobile devices, screen size is expressed in terms of the length of its diagonal, measured in inches.

4 in (inches)
101.6 mm (millimeters)
10.16 cm (centimeters)
Width

Approximate screen width

2.06 in (inches)
52.27 mm (millimeters)
5.23 cm (centimeters)
Height

Approximate screen height

3.43 in (inches)
87.12 mm (millimeters)
8.71 cm (centimeters)
Aspect ratio

The aspect ratio of the long side of the screen to its short side

1.667:1
5:3
Permission

Screen resolution indicates the number of pixels horizontally and vertically on the screen. More a high resolution means sharper image detail.

480 x 800 pixels
Pixel density

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail.

233 ppi (pixels per inch)
91 ppcm (pixels per centimeter)
Color depth

Screen color depth reflects the total number of bits used for color components in one pixel. Information on maximum number colors that the screen can show.

18 bit
262144 flowers
Screen footprint

The approximate percentage of the display area on the front of the device.

58.34% (percent)
Other characteristics

Information about other functions and features of the screen.

Capacitive
Multitouch

Sensors

Different sensors perform different quantitative measurements and convert physical metrics into signals that can be recognized by the mobile device.

Rear camera

The main camera of a mobile device is usually located on its rear panel and can be combined with one or more additional cameras.

Flash type

The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape.

LED
Image Resolution

Resolution is one of the main characteristics of cameras. It represents the number of horizontal and vertical pixels in the image. For convenience, smartphone manufacturers often quote resolutions in megapixels, indicating the approximate number of pixels in millions.

2592 x 1944 pixels
5.04 MP (megapixels)
Video resolution

Information about the maximum video resolution that the camera can record.

1280 x 720 pixels
0.92 MP (megapixels)
Video recording rate (frame rate)

Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording speeds are 24 fps, 25 fps, 30 fps, 60 fps.

30 frames / sec (frames per second)
Specifications

Information about additional software and hardware features of the rear (rear) camera.

Digital zoom
Panoramic shooting
HDR shooting

Front-camera

Smartphones have one or more front cameras of different designs - pop-up camera, PTZ camera, notch or hole in the display, camera under the display.

Audio

Information about the type of speakers and audio technology supported by the device.

Radio

The radio of the mobile device is a built-in FM receiver.

Locating

Information about the navigation and positioning technologies supported by the device.

Wi-Fi

Wi-Fi is a technology that enables wireless communication for transferring data over short distances between various devices.

Bluetooth

Bluetooth is a standard for secure wireless transfer of data between different types of devices over short distances.

USB

USB (Universal Serial Bus) is an industry standard that allows different electronic devices to exchange data.

Headphone jack

This is an audio connector, which is also called an audio connector. The most widely used standard in mobile devices is the 3.5mm headphone jack.

Connecting devices

Information about other important connection technologies supported by the device.

Browser

A web browser is a software application for accessing and viewing information on the Internet.

Video file formats / codecs

Mobile devices support different video file formats and codecs, which respectively store and encode / decode digital video data.

Battery

Mobile device batteries differ in their capacity and technology. They provide the electrical charge required for their function.

Capacity

Battery capacity indicates the maximum charge it can store, measured in milliampere-hours.

1400 mAh (milliampere-hours)
Type of

The type of battery is determined by its structure and, more precisely, by the chemicals used. Exists different types lithium-ion and lithium-ion-polymer batteries are most commonly used in mobile devices.

Li-Ion (Lithium-ion)
Talk time 2G

Talk time in 2G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 2G network.

9 h (hours)
540 minutes (minutes)
0.4 days
Standby time 2G

Standby time in 2G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 2G network.

400 h (hours)
24000 min (minutes)
16.7 days
Talk time 3G

Talk time in 3G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network.

6 h (hours)
360 min (minutes)
0.3 days
3G standby time

Standby time in 3G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 3G network.

350 h (hours)
21000 min (minutes)
14.6 days
Specifications

Information about some additional characteristics of the device's battery.

Removable

Regular model

Phone experience: less than a month

The advantages of the phone are the price. Relative ease of management. The alarm works even when the phone is off. Disadvantages of the phone: It often loses the network, and not for 1-2 minutes and both SIM cards at once. Only reboot saves. By themselves, icons disappear from the desktop. VERY dumb sensor. You have to poke several times not only on the screen - the lower buttons slow down and are not highlighted yet. The camera and battery are none.

A comment about the phone:

I bought it for 3490, because of the break it is not a pity. It doesn't cost anymore. Before that, there was an Acer e2 liguid duo, but only lived for 8 months - fell out of his pocket onto a tile - the cost of repairs was declared higher than the price of the phone. It was a pity, so I decided not to contact Eiser anymore and bought Alcatel. I write from him and swear))) Enrages. It would be better to buy a Samsung.

Review # 2 about Alcatel POP D3 4035D phone

Regular model

Phone experience: several months

The advantages of the phone are the price.
- screen brightness.
- good sound and volume on the call.
- the screen and the case are scratch resistant. I wear it without a film, the phone itself is white and at least that.
- good build. Disadvantages of the phone: - dull touchscreen. With digital dialing, he dials a subscriber himself.
- glitch when called. You call one, and the phone rings another subscriber.
- interlocutors always complain about extraneous noises during a conversation! I can't hear them (noises). You can only talk on the street without interference.
- there is NO declared 5MP in the camera. When setting up Aviray detects the camera as 3.2MP. There is also no autofocus. There is nothing to say about the frontal one.
- the battery runs out quickly.


2021
maccase.ru - Android. Brands. Iron. news